Youngsoo Kim

Zeng, Z., Kim, Y. R., Underwood, B. S., & Guddati, M. (2024). Modeling damage caused by combined thermal and traffic loading using viscoelastic continuum damage theory. CONSTRUCTION AND BUILDING MATERIALS, 418. https://doi.org/10.1016/j.conbuildmat.2024.135425

Zeng, Z., Kim, Y. R., Underwood, B. S., & Guddati, M. (2023). Asphalt mixture fatigue damage and failure predictions using the simplified viscoelastic continuum damage (S-VECD) model. INTERNATIONAL JOURNAL OF FATIGUE, 174. https://doi.org/10.1016/j.ijfatigue.2023.107736

Saleh, N. F., DeCarlo, K., Underwood, B. S., Pine, W. J., Huber, G., Tran, N., … Kim, Y. R. (2023, May 4). Case Studies of Asphalt Pavement Quality Assurance Specifications, Performance-Related Specifications, and Performance-Based Specifications. TRANSPORTATION RESEARCH RECORD, Vol. 5. https://doi.org/10.1177/03611981231166685

Jia, H., Sheng, Y., Guo, P., Underwood, S., Chen, H., Kim, Y. R., … Ma, Q. (2023). [Review of Effect of synthetic fibers on the mechanical performance of asphalt mixture: A review]. JOURNAL OF TRAFFIC AND TRANSPORTATION ENGINEERING-ENGLISH EDITION, 10(3), 331–348. https://doi.org/10.1016/j.jtte.2023.02.002

Mocelin, D. M., Isied, M. M., Alvis, M. C. A., Kusam, A., Underwood, B. S., Kim, Y. R., & Castorena, C. (2023, April 19). Laboratory Performance Evaluation of Alternative Approaches to Incorporate Recycled Binder Availability into Mixture Design Procedures. TRANSPORTATION RESEARCH RECORD, Vol. 4. https://doi.org/10.1177/03611981231161601

Sudarsanan, N., Zeng, Z. A., & Kim, Y. R. (2023). Laboratory investigation into the crack propagation mechanism of geosynthetic reinforced asphalt concrete using digital image correlation technique. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 24(1). https://doi.org/10.1080/10298436.2023.2251079

Ding, J., Jeong, J., Lee, K. C., Underwood, B. S., Kim, Y. R., & Castorena, C. (2023, April 11). Repeatability and Reproducibility Analysis for Functional Test Results from Asphalt Mixture Performance Tester Cyclic Fatigue Test. TRANSPORTATION RESEARCH RECORD, Vol. 4. https://doi.org/10.1177/03611981231159409

Kuchiishi, A. K., Castorena, C., Kim, Y. R., & Underwood, B. S. (2023, April 27). Ruggedness Evaluation of Dynamic Modulus Test Using Small-Scale Test Specimens for Asphalt Mixture Performance Tester. TRANSPORTATION RESEARCH RECORD, Vol. 4. https://doi.org/10.1177/03611981231165780

Keshavarzi, B., Mocelin, D., & Kim, Y. R. (2022). A Composite Model for Predicting the Coefficient of Thermal Contraction for Asphalt Concrete Mixtures. JOURNAL OF TESTING AND EVALUATION, 50(1), 1–23. https://doi.org/10.1520/JTE2021003

Cao, W., & Kim, Y. R. (2022). A Triaxial Viscoplastic Model with Temperature Dependence for Asphalt Concrete Permanent Deformation. INTERNATIONAL JOURNAL OF APPLIED MECHANICS, 14(03). https://doi.org/10.1142/S1758825122500235

Cao, W., Lacroix, A., & Kim, Y. R. (2022). A triaxial linear viscoelastic characterization framework for asphalt concrete based on the 2S2P1D model. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 92. https://doi.org/10.1016/j.euromechsol.2021.104469

Bueno, L. D., Schuster, S. L., Specht, L. P., Pereira, D. da S., Nascimento, L. A. H., Kim, Y. R., & Brenner, M. G. B. (2022). Asphalt pavement design optimisation: a case study using viscoelastic continuum damage theory. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 23(4), 1070–1082. https://doi.org/10.1080/10298436.2020.1788030

Spadoni, S., Ingrassia, L. P., Mocelin, D., Kim, Y. R., & Canestrari, F. (2022). Comparison of asphalt mixtures containing polymeric compounds and polymer-modified bitumen based on the VECD theory. CONSTRUCTION AND BUILDING MATERIALS, 349. https://doi.org/10.1016/j.conbuildmat.2022.128725

Bueno, L. D., Pereira, D. da S., Specht, L. P., Nascimento, L. A. H., Schuster, S. L., Fritzen, M. A., … Back, A. H. (2022, February 3). Contribution to the mechanistic-empirical roughness prediction in asphalt pavements. ROAD MATERIALS AND PAVEMENT DESIGN. https://doi.org/10.1080/14680629.2022.2029758

Jeong, J., Underwood, S., & Kim, Y. R. (2022). Cracking performance predictions using index-volumetrics relationships with direct tension cyclic fatigue test and Illinois Flexibility Index Test (I-FIT). CONSTRUCTION AND BUILDING MATERIALS, 315. https://doi.org/10.1016/j.conbuildmat.2021.125631

Wang, Y. D., Underwood, B. S., & Kim, Y. R. (2022). Development of a fatigue index parameter, S-app, for asphalt mixes using viscoelastic continuum damage theory. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 23(2), 438–452. https://doi.org/10.1080/10298436.2020.1751844

Saleh, N. F., Braswell, E., Elwardany, M., Rad, F. Y., Castorena, C., & Kim, Y. R. (2022). Field Calibration and Validation of a Pavement Aging Model. International Journal of Pavement Engineering, 2. https://doi.org/10.1080/10298436.2022.2027416

Safavizadeh, S. A., Cho, S.-H., & Kim, Y. R. (2022). Interface shear strength and shear fatigue resistance of fibreglass grid-reinforced asphalt concrete test specimens. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 23(8), 2531–2542. https://doi.org/10.1080/10298436.2020.1861447

Ragni, D., Sudarsanan, N., Canestrari, F., & Kim, Y. R. (2022). Investigation into fatigue life of interface bond between asphalt concrete layers. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 23(10), 3371–3385. https://doi.org/10.1080/10298436.2021.1894420

Gulzar, S., Richard Kim, Y., Castorena, C., & Shane Underwood, B. (2021). COVID-19, Uncertainty, and the Need for Resilience-Based Thinking in Pavement Engineering. JOURNAL OF TRANSPORTATION ENGINEERING PART B-PAVEMENTS, 147(1). https://doi.org/10.1061/JPEODX.0000235

Zeng, Z., Lee, K., & Kim, Y. R. (2021, February 28). Determination of Dynamic Modulus Master Curve of Damaged Asphalt Pavements for Mechanistic-Empirical Pavement Rehabilitation Design. TRANSPORTATION RESEARCH RECORD, Vol. 2. https://doi.org/10.1177/0361198121996708

Wang, Y. D., Ghanbari, A., Underwood, B. S., & Kim, Y. R. (2021, June 9). Development of framework of the predictive performance-engineered mix design procedure for asphalt mixtures. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, Vol. 6. https://doi.org/10.1080/10298436.2021.1938044

Ashouri, M., Wang, Y., Choi, Y.-T., & Kim, Y. (2021). Development of healing model and simplified characterization test procedure for asphalt concrete. CONSTRUCTION AND BUILDING MATERIALS, 271. https://doi.org/10.1016/j.conbuildmat.2020.121515

Wang, Y. D., Ghanbari, A., Underwood, B. S., & Kim, Y. R. (2021). Development of preliminary transfer functions for performance predictions in FIexPAVE (TM). CONSTRUCTION AND BUILDING MATERIALS, 266. https://doi.org/10.1016/j.conbuildmat.2020.121182

Wang, Y. D., & Kim, Y. R. (2021). Effects of Aging on Pavement ME Predictions of Permanent Deformation for HMA and WMA Mixtures. JOURNAL OF TRANSPORTATION ENGINEERING PART B-PAVEMENTS, 147(4). https://doi.org/10.1061/JPEODX.0000319

Jia, H., Sheng, Y., Lv, H., Kim, Y. R., Zhao, X., Meng, J., & Xiong, R. (2021). Effects of bamboo fiber on the mechanical properties of asphalt mixtures. CONSTRUCTION AND BUILDING MATERIALS, 289. https://doi.org/10.1016/j.conbuildmat.2021.123196

Keshavarzi, B., Mocelin, D., & Kim, Y. R. (2021). Predicting Thermal Stress Restrained Specimen Test Fracture Temperatures Using the Dissipated Pseudo Strain Energy Criterion. JOURNAL OF TRANSPORTATION ENGINEERING PART B-PAVEMENTS, 147(1). https://doi.org/10.1061/JPEODX.0000236

Braswell, E., Saleh, N. F., Elwardany, M., Yousefi Rad, F., Castorena, C., Underwood, B. S., & Kim, Y. R. (2021). Refinement of Climate-, Depth-, and Time-Based Laboratory Aging Procedure for Asphalt Mixtures. TRANSPORTATION RESEARCH RECORD, 2675(2), 207–218. https://doi.org/10.1177/0361198120957316

Jeong, J., Underwood, B. S., & Kim, Y. R. (2021). Rutting performance prediction using index-volumetrics relationships with stress sweep rutting test and Hamburg wheel-track test. CONSTRUCTION AND BUILDING MATERIALS, 295. https://doi.org/10.1016/j.conbuildmat.2021.123664

Ding, J., Lee, K. C., Castorena, C., Kim, Y. R., & Underwood, B. S. (2021, February 22). Use of Resampling Method to Construct Variance Index and Repeatability Limit of Damage Characteristic Curve. TRANSPORTATION RESEARCH RECORD, Vol. 2. https://doi.org/10.1177/0361198121994850

Keshavarzi, B., & Kim, Y. R. (2020). A dissipated pseudo strain energy-based failure criterion for thermal cracking and its verification using thermal stress restrained specimen tests. CONSTRUCTION AND BUILDING MATERIALS, 233. https://doi.org/10.1016/j.conbuildmat.2019.117199

Sudarsanan, N., Fonte, B. R., & Kim, Y. R. (2020). Application of time-temperature superposition principle to pull-off tensile strength of asphalt tack coats. CONSTRUCTION AND BUILDING MATERIALS, 262. https://doi.org/10.1016/j.conbuildmat.2020.120798

Jeong, J., Adams, J. M., & Kim, Y. R. (2020). Chip Seal Construction Variability and Its Impact on Performance. JOURNAL OF TRANSPORTATION ENGINEERING PART B-PAVEMENTS, 146(4). https://doi.org/10.1061/JPEODX.0000218

Wang, Y. D., Jeong, J., & Kim, Y. R. (2020). Comparison of Treatment Timing between Aggregate Base and Full-Depth Asphalt Roads. JOURNAL OF TRANSPORTATION ENGINEERING PART B-PAVEMENTS, 146(4). https://doi.org/10.1061/JPEODX.0000216

Sheng, Y., Wu, Y., Yan, Y., Jia, H., Qiao, Y., Underwood, B. S., … Kim, Y. R. (2020). Development of environmentally friendly flame retardant to achieve low flammability for asphalt binder used in tunnel pavements. JOURNAL OF CLEANER PRODUCTION, 257. https://doi.org/10.1016/j.jclepro.2020.120487

Saleh, N. F., Keshavarzi, B., Rad, F. Y., Mocelin, D., Elwardany, M., Castorena, C., … Kim, Y. R. (2020). Effects of aging on asphalt mixture and pavement performance. CONSTRUCTION AND BUILDING MATERIALS, 258. https://doi.org/10.1016/j.conbuildmat.2020.120309

Jeong, J., Wang, Y. D., Ghanbari, A., Nash, C., Nener-Plante, D., Underwood, B. S., & Kim, Y. R. (2020). Pavement performance predictions using performance-volumetric relationship and evaluation of construction variability: Example of MaineDOT shadow project for the development of performance-related specifications. CONSTRUCTION AND BUILDING MATERIALS, 263. https://doi.org/10.1016/j.conbuildmat.2020.120150

Saleh, N. F., Mocelin, D., Yousefi Rad, F., Castorena, C., Underwood, B. S., & Kim, Y. R. (2020). Predictive Framework for Modeling Changes in Asphalt Mixture Moduli with Oxidative Aging. TRANSPORTATION RESEARCH RECORD, 2674(10), 79–93. https://doi.org/10.1177/0361198120938775

Ding, J., Wang, Y. D., Gulzar, S., Kim, Y. R., & Underwood, B. S. (2020). Uncertainty Quantification of Simplified Viscoelastic Continuum Damage Fatigue Model using the Bayesian Inference-Based Markov Chain Monte Carlo Method. TRANSPORTATION RESEARCH RECORD, 2674(4), 247–260. https://doi.org/10.1177/0361198120910149

Adams, J., Castorena, C., & Kim, Y. R. (2019). Construction quality acceptance performance-related specifications for chip seals. JOURNAL OF TRAFFIC AND TRANSPORTATION ENGINEERING-ENGLISH EDITION, 6(4), 337–348. https://doi.org/10.1016/j.jtte.2019.05.003

Niu, D., Chen, H., Richard Kim, Y., Sheng, Y., Geng, J., Guan, B., … Yang, Z. (2019). Damage assessment of asphalt concrete with composite additives at the FAM–coarse aggregate interfacial zone. Construction and Building Materials, 198, 587–596. https://doi.org/10.1016/J.CONBUILDMAT.2018.11.272

Wang, Y. D., Ghanbari, A., Underwood, B. S., & Kim, Y. R. (2019). Development of a Performance-Volumetric Relationship for Asphalt Mixtures. Transportation Research Record: Journal of the Transportation Research Board, 2673(6), 416–430. https://doi.org/10.1177/0361198119845364

Wang, Y., & Kim, Y. R. (2019). Development of a pseudo strain energy-based fatigue failure criterion for asphalt mixtures. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 20(10), 1182–1192. https://doi.org/10.1080/10298436.2017.1394100

Etheridge, R. A., Wang, Y. D., Kim, S. S., & Kim, Y. R. (2019). Evaluation of Fatigue Cracking Resistance of Asphalt Mixtures Using Apparent Damage Capacity. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 31(11). https://doi.org/10.1061/(ASCE)MT.1943-5533.0002870

Geng, J., Chen, M., Shang, T., Li, X., Kim, Y. R., & Kuang, D. (2019). The Performance of Super Absorbent Polymer (SAP) Water-Retaining Asphalt Mixture. MATERIALS, 12(12). https://doi.org/10.3390/ma12121964

Rad, F. Y., Elwardany, M. D., Castorena, C., & Kim, Y. R. (2018). Evaluation of Chemical and Rheological Aging Indices to Track Oxidative Aging of Asphalt Mixtures. TRANSPORTATION RESEARCH RECORD, 2672(28), 349–358. https://doi.org/10.1177/0361198118784138

Wang, Y. D., Keshavarzi, B., & Kim, Y. R. (2018). Fatigue Performance Analysis of Pavements with RAP Using Viscoelastic Continuum Damage Theory. KSCE JOURNAL OF CIVIL ENGINEERING, 22(6), 2118–2125. https://doi.org/10.1007/s12205-018-2648-0

Wang, Y. D., Keshavarzi, B., & Kim, Y. R. (2018). Fatigue Performance Prediction of Asphalt Pavements with FlexPAVE (TM), the S-VECD Model, and D-R Failure Criterion. TRANSPORTATION RESEARCH RECORD, 2672(40), 217–227. https://doi.org/10.1177/0361198118756873

Castorena, C., Ilias, M., Adams, J., & Kim, Y. R. (2018). Low-Temperature Emulsion Performance-Graded Specification for Chip Seals. TRANSPORTATION RESEARCH RECORD, 2672(28), 266–276. https://doi.org/10.1177/0361198118790133

Adams, J., Ilias, M., Castorena, C., & Kim, Y. R. (2018). Performance-Graded Specifications for Asphalt Emulsions Used in Chip Seal Preservation Treatments. TRANSPORTATION RESEARCH RECORD, 2672(12), 20–31. https://doi.org/10.1177/0361198118770169

Kwon, B. J., Kim, D., Rhee, S. K., & Kim, Y. R. (2018). Spray injection patching for pothole repair using 100 percent reclaimed asphalt pavement. CONSTRUCTION AND BUILDING MATERIALS, 166, 445–451. https://doi.org/10.1016/j.conbuildmat.2018.01.145

Bastos, J. B. dos S., Torquato e Silva, S. de A., Soares, J. B., Nascimento, L. A. H., & Kim, Y. R. (2018). Triaxial stress sweep test protocol considerations for permanent deformation characterisation of asphalt mixtures. Road Materials and Pavement Design, 19(2), 431–444. https://doi.org/10.1080/14680629.2016.1261729

Safavizadeh, S. A., Wargo, A., & Kim, Y. R. (2018). Utilizing Digital Image Correlation (DIC) in Asphalt Pavement Testing. JOURNAL OF TESTING AND EVALUATION, 46(3), 984–998. https://doi.org/10.1520/jte20160262

Xie, W., Castorena, C., Wang, C., & Kim, Y. R. (2017). A framework to characterize the healing potential of asphalt binder using the linear amplitude sweep test. CONSTRUCTION AND BUILDING MATERIALS, 154, 771–779. https://doi.org/10.1016/j.conbuildmat.2017.08.021

Cho, S.-H., Karshenas, A., Tayebali, A. A., Guddati, M. N., & Kim, Y. R. (2017). A mechanistic approach to evaluate the potential of the debonding distress in asphalt pavements. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 18(12), 1098–1110. https://doi.org/10.1080/10298436.2016.1149837

Adams, J., Castorena, C., Im, J. H., Ilias, M., & Kim, Y. R. (2017). Addressing Raveling Resistance in Chip Seal Specifications. TRANSPORTATION RESEARCH RECORD, (2612), 39–46. https://doi.org/10.3141/2612-05

Wang, C., Castrorena, C., Zhang, J., & Kim, Y. R. (2017). Application of Time-Temperature Superposition Principle on Fatigue Failure Analysis of Asphalt Binder. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 29(1). https://doi.org/10.1061/(asce)mt.1943-5533.0001730

Kim, D., & Kim, Y. R. (2017). Characterization of Permanent Deformation of Asphalt Mixtures with Minimum Strain Rate, LVECD Program, and Triaxial Stress Sweep Test. TRANSPORTATION RESEARCH RECORD, (2631), 96–104. https://doi.org/10.3141/2631-11

Wargo, A., Safavizadeh, S. A., & Kim, Y. R. (2017). Comparing the performance of fiberglass grid with composite interlayer systems in asphalt concrete. Transportation Research Record, (2631), 123–132.

Safavizadeh, S. A., & Kim, Y. R. (2017). DIC Technique to Investigate Crack Propagation in Grid-Reinforced Asphalt Specimens. Journal of Materials in Civil Engineering, 29(6), 04017011. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001839

Kim, D., & Kim, Y. R. (2017). Determination of Dynamic Modulus Values of Asphalt Mixtures Using Impact Resonance Testing of Thin Disk Specimens. JOURNAL OF TESTING AND EVALUATION, 45(2), 509–520. https://doi.org/10.1520/jte20150076

Lee, J.-S., Norouzi, A., & Kim, Y. R. (2017). Determining Specimen Geometry of Cylindrical Specimens for Direct Tension Fatigue Testing of Asphalt Concrete. JOURNAL OF TESTING AND EVALUATION, 45(2), 613–623. https://doi.org/10.1520/jte20140357

Kim, D., & Kim, Y. R. (2017). Development of Stress Sweep Rutting (SSR) test for permanent deformation characterization of asphalt mixture. CONSTRUCTION AND BUILDING MATERIALS, 154, 373–383. https://doi.org/10.1016/j.conbuildmat.2017.07.172

Daniel, J. S., Kim, Y. R., & Roque, R. (2017). Editorial. ROAD MATERIALS AND PAVEMENT DESIGN, Vol. 18, pp. 1–1. https://doi.org/10.1080/14680629.2017.1389095

Norouzi, A., Kim, Y. R., Kim, S. S., & Yang, J. (2017). Effect of Reclaimed Asphalt Pavement Content and Binder Grade on Fatigue-Resisting Performance of Asphalt Mixtures in Georgia. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 29(9). https://doi.org/10.1061/(asce)mt.1943-5533.0001960

Lee, K., Pape, S., Castorena, C., & Kim, Y. R. (2017). Evaluation of Small Specimen Geometries for Asphalt Mixture Performance Testing and Pavement Performance Prediction. TRANSPORTATION RESEARCH RECORD, (2631), 74–82. https://doi.org/10.3141/2631-09

Elwardany, M. D., Yousefi Rad, F., Castorena, C., & Kim, Y. R. (2017). Evaluation of asphalt mixture laboratory long-term ageing methods for performance testing and prediction. Road Materials and Pavement Design, 18(sup1), 28–61. https://doi.org/10.1080/14680629.2016.1266740

Safavizadeh, S. A., & Kim, Y. R. (2017). Fatigue and fracture characterization of fiberglass grid-reinforced beam specimens using four-point bending notched beam fatigue test and digital image correlation technique. MATERIALS AND STRUCTURES, 50(2). https://doi.org/10.1617/s11527-016-0980-8

Sakhaeifar, M. S., Kim, Y. R., & Montano, B. E. G. (2017). Individual temperature based models for nondestructive evaluation of complex moduli in asphalt concrete. CONSTRUCTION AND BUILDING MATERIALS, 137, 117–127. https://doi.org/10.1016/j.conbuildmat.2016.12.145

Rad, F. Y., Elwardany, M. D., Castorena, C., & Kim, Y. R. (2017). Investigation of proper long-term laboratory aging temperature for performance testing of asphalt concrete. CONSTRUCTION AND BUILDING MATERIALS, 147, 616–629. https://doi.org/10.1016/j.conbuildmat.2017.04.197

Norouzi, A., & Kim, Y. R. (2017). Mechanistic evaluation of fatigue cracking in asphalt pavements. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 18(6), 530–546. https://doi.org/10.1080/10298436.2015.1095909

Kim, D., Norouzi, A., Kass, S., Liske, T., & Kim, Y. R. (2017). Mechanistic performance evaluation of pavement sections containing RAP and WMA additives in Manitoba. CONSTRUCTION AND BUILDING MATERIALS, 133, 39–50. https://doi.org/10.1016/j.conbuildmat.2016.12.035

Norouzi, A., & Kim, Y. R. (2017). Ruggedness Study of Dynamic Modulus Testing of Asphalt Concrete in Indirect Tension Mode. JOURNAL OF TESTING AND EVALUATION, 45(2), 601–612. https://doi.org/10.1520/jte20150118

Cho, S. H., Safavizadeh, S. A., & Kim, Y. R. (2017). Verification of the applicability of the time-temperature superposition principle to interface shear stiffness and strength of GlasGrid-reinforced asphalt mixtures. ROAD MATERIALS AND PAVEMENT DESIGN, 18(4), 766–784. https://doi.org/10.1080/14680629.2016.1189350

Keshavarzi, B., & Kim, Y. R. (2016). A viscoelastic-based model for predicting the strength of asphalt. concrete in direct tension. CONSTRUCTION AND BUILDING MATERIALS, 122, 721–727. https://doi.org/10.1016/j.conbuildmat.2016.06.089

Cao, W., & Kim, Y. R. (2016). A viscoplastic model for the confined permanent deformation of asphalt concrete in compression. MECHANICS OF MATERIALS, 92, 235–247. https://doi.org/10.1016/j.mechmat.2015.10.001

Dehghan Banadaki, A., Guddati, M. N., & Kim, Y. R. (2016). An algorithm for virtual fabrication of air voids in asphalt concrete. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 17(3), 225–232. https://doi.org/10.1080/10298436.2014.979822

Cao, W., Norouzi, A., & Kim, Y. R. (2016). Application of viscoelastic continuum damage approach to predict fatigue performance of Binzhou perpetual pavements. Journal of Traffic and Transportation Engineering (English Edition), 3(2), 104–115. https://doi.org/10.1016/J.JTTE.2016.03.002

Wang, Y., Norouzi, A., & Kim, Y. R. (2016). Comparison of Fatigue Cracking Performance of Asphalt Pavements Predicted by Pavement ME and LVECD Programs. TRANSPORTATION RESEARCH RECORD, (2590), 44–55. https://doi.org/10.3141/2590-06

Sabouri, M., Choi, Y.-T., Wang, Y., Hwang, S., Baek, C., & Kim, R. Y. (2016). Effect of Rejuvenator on Performance Properties of WMA Mixtures with High RAP Content. 8TH RILEM INTERNATIONAL SYMPOSIUM ON TESTING AND CHARACTERIZATION OF SUSTAINABLE AND INNOVATIVE BITUMINOUS MATERIALS, Vol. 11, pp. 473–484. https://doi.org/10.1007/978-94-017-7342-3_38

Jacques, C., Daniel, J. S., Bennert, T., Reinke, G., Norouzi, A., Ericson, C., … Kim, Y. R. (2016). Effect of Silo Storage Time on the Characteristics of Virgin and Reclaimed Asphalt Pavement Mixtures. TRANSPORTATION RESEARCH RECORD, (2573), 76–85. https://doi.org/10.3141/2573-10

Wang, C., Zhang, H., Castorena, C., Zhang, J., & Kim, Y. R. (2016). Identifying fatigue failure in asphalt binder time sweep tests. CONSTRUCTION AND BUILDING MATERIALS, 121, 535–546. https://doi.org/10.1016/j.conbuildmat.2016.06.020

Safaei, F., Castorena, C., & Kim, Y. R. (2016). Linking asphalt binder fatigue to asphalt mixture fatigue performance using viscoelastic continuum damage modeling. MECHANICS OF TIME-DEPENDENT MATERIALS, 20(3), 299–323. https://doi.org/10.1007/s11043-016-9304-1

Norouzi, A., Kim, D., & Kim, Y. R. (2016). Numerical evaluation of pavement design parameters for the fatigue cracking and rutting performance of asphalt pavements. MATERIALS AND STRUCTURES, 49(9), 3619–3634. https://doi.org/10.1617/s11527-015-0744-x

Im, J. H., & Kim, Y. R. (2016). Performance Evaluation of Chip Seals for Higher Volume Roads Using Polymer-Modified Emulsions: Laboratory and Field Study in North Carolina. JOURNAL OF TESTING AND EVALUATION, 44(1), 484–497. https://doi.org/10.1520/jte20140544

Cao, W., & Kim, Y. R. (2016). The extended shift model as a mechanistic-empirical approach to simulating confined permanent deformation of asphalt concrete in compression. CONSTRUCTION AND BUILDING MATERIALS, 115, 520–526. https://doi.org/10.1016/j.conbuildmat.2016.04.079

Wargo, A. D., Safavizadeh, S., & Kim, R. Y. (2016). The use of four-point bending notched beam fatigue tests to rank crack-mitigating interlayers. 8th rilem international symposium on testing and characterization of sustainable and innovative bituminous materials, 11, 359–370.

Cho, S.-H., & Kim, Y. R. (2016). Verification of Time-Temperature Superposition Principle for Shear Bond Failure of Interlayers in Asphalt Pavements. TRANSPORTATION RESEARCH RECORD, (2590), 18–27. https://doi.org/10.3141/2590-03

Sabouri, M., Bennert, T., Daniel, J. S., & Kim, Y. R. (2015). A comprehensive evaluation of the fatigue behaviour of plant-produced RAP mixtures. ROAD MATERIALS AND PAVEMENT DESIGN, Vol. 16, pp. 29–54. https://doi.org/10.1080/14680629.2015.1076997

Zhang, J., Yang, J., & Kim, Y. R. (2015). Characterization of mechanical behavior of asphalt mixtures under partial triaxial compression test. CONSTRUCTION AND BUILDING MATERIALS, 79, 136–144. https://doi.org/10.1016/j.conbuildmat.2014.12.085

Sabouri, M., Bennert, T., Daniel, J. S., & Kim, Y. R. (2015). Fatigue and rutting evaluation of laboratory-produced asphalt mixtures containing reclaimed asphalt pavement. Transportation Research Record, (2506), 32–44.

Safavizadeh, S. A., Wargo, A., Guddati, M., & Kim, Y. R. (2015). Investigating reflective cracking mechanisms in grid-reinforced asphalt specimens use of four-point bending notched beam fatigue tests and digital image correlation. Transportation Research Record, (2507), 29–38.

Veytskin, Y., Bobko, C., Castorena, C., & Kim, Y. R. (2015). Nanoindentation investigation of asphalt binder and mastic cohesion. CONSTRUCTION AND BUILDING MATERIALS, 100, 163–171. https://doi.org/10.1016/j.conbuildmat.2015.09.053

Sakhaeifar, M. S., Kim, Y. R., & Kabir, P. (2015). New predictive models for the dynamic modulus of hot mix asphalt. CONSTRUCTION AND BUILDING MATERIALS, 76, 221–231. https://doi.org/10.1016/j.conbuildmat.2014.11.011

Im, J. H., & Kim, Y. R. (2015). Performance evaluation of fog seals on chip seals and verification of fog seal field tests. CANADIAN JOURNAL OF CIVIL ENGINEERING, 42(11), 872–880. https://doi.org/10.1139/cjce-2014-0340

Park, H. J., & Kim, Y. R. (2015). Primary causes of cracking of asphalt pavement in North Carolina: field study. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 16(8), 684–698. https://doi.org/10.1080/10298436.2014.943220

Lee, J., Kim, Y. R., & Lee, J. (2015). Rutting performance evaluation of asphalt mix with different types of geosynthetics using MMLS3. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 16(10), 894–905. https://doi.org/10.1080/10298436.2014.972916

Wang, C., Castorena, C., Zhang, J., & Kim, Y. R. (2015). Unified failure criterion for asphalt binder under cyclic fatigue loading. ROAD MATERIALS AND PAVEMENT DESIGN, Vol. 16, pp. 125–148. https://doi.org/10.1080/14680629.2015.1077010

Lee, J.-S., Gibson, N., & Kim, Y. R. (2015). Use of Mechanistic Models to Investigate Fatigue Performance of Asphalt Mixtures Effects of Asphalt Mix Design Targets and Compaction. TRANSPORTATION RESEARCH RECORD, (2507), 108–119. https://doi.org/10.3141/2507-12

Underwood, B. S., & Kim, Y. R. (2014). A four phase micro-mechanical model for asphalt mastic modulus. Mechanics of Materials, 75, 13–33. https://doi.org/10.1016/j.mechmat.2014.04.001

Asphalt pavements. (2014). Boca Raton: CRC Press.

Sabouri, M., & Kim, Y. R. (2014). Development of a failure criterion for asphalt mixtures under different modes of fatigue loading. Transportation Research Record, (2447), 117–125.

Buttlar, W. G., Hill, B. C., Kim, Y. R., Kutay, M. E., Millien, A., Montepara, A., … Wargo, A. (2014). Digital image correlation techniques to investigate strain fields and cracking phenomena in asphalt materials. MATERIALS AND STRUCTURES, 47(8), 1373–1390. https://doi.org/10.1617/s11527-014-0362-z

Im, J. H., & Kim, Y. R. (2014). Evaluation of early aggregate retention performance of chip seals with polymer-modified emulsions. Asphalt Pavements, vol 1, 105–114. https://doi.org/10.1201/b17219-20

Choi, Y.-T., & Kim, Y. R. (2014). Implementation and verification of a mechanistic permanent deformation model (shift model) to predict rut depths of asphalt pavement. ROAD MATERIALS AND PAVEMENT DESIGN, 15, 195–218. https://doi.org/10.1080/14680629.2014.927085

Safaei, F., Lee, J.-sub, Nascimento, L. A. H. do, Hintz, C., & Kim, Y. R. (2014). Implications of warm-mix asphalt on long-term oxidative ageing and fatigue performance of asphalt binders and mixtures. Road Materials and Pavement Design, 15(sup1), 45–61. https://doi.org/10.1080/14680629.2014.927050

Karshenas, A., Cho, S.-H., Tayebali, A. A., Guddati, M. N., & Kim, Y. R. (2014). Importance of Normal Confinement to Shear Bond Failure of Interface in Multi layer Asphalt Pavements. TRANSPORTATION RESEARCH RECORD, (2456), 170–177. https://doi.org/10.3141/2456-17

Adams, J. M., & Kim, Y. R. (2014). Mean profile depth analysis of field and laboratory traffic-loaded chip seal surface treatments. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 15(7), 645–656. https://doi.org/10.1080/10298436.2013.851790

Park, H. J., Eslaminia, M., & Kim, Y. R. (2014). Mechanistic evaluation of cracking in in-service asphalt pavements. MATERIALS AND STRUCTURES, 47(8), 1339–1358. https://doi.org/10.1617/s11527-014-0307-6

Underwood, B. S., & Kim, Y. R. (2014). Nonlinear viscoelastic analysis of asphalt cement and asphalt mastics. International Journal of Pavement Engineering, 16(6), 510–529. https://doi.org/10.1080/10298436.2014.943133

Lacroix, A., & Kim, Y. R. (2014). Performance Predictions of Rutting for the National Center for Asphalt Technology Test Track. TRANSPORTATION RESEARCH RECORD, (2457), 41–50. https://doi.org/10.3141/2457-05

Lee, J.-S., & Kim, Y. R. (2014). Performance-Based Moisture Susceptibility Evaluation of Warm-Mix Asphalt Concrete Through Laboratory Tests. TRANSPORTATION RESEARCH RECORD, (2446), 17–28. https://doi.org/10.3141/2446-03

Wargo, A. D., Islam, S., & Kim, Y. R. (2014). The reflective cracking tester: A third-scale accelerated pavement tester for reflective cracking. Asphalt Pavements, vols 1 and 2, 1685–1693.

Choi, Y.-T., & Kim, Y. R. (2013). A Mechanistic Permanent Deformation Model for Asphalt Concrete in Compression. ASPHALT PAVING TECHNOLOGY 2013, VOL 82, Vol. 82, pp. 617–649. https://doi.org/10.1080/14680629.2013.812847

Choi, Y. T., & Kim, Y. R. (2013). A mechanistic permanent deformation model for asphalt concrete in compression. Asphalt paving technology 2013, vol 82, 82, 617–649.

Subramanian, V., Guddati, M. N., & Kim, Y. R. (2013). A viscoplastic model for rate-dependent hardening for asphalt concrete in compression. MECHANICS OF MATERIALS, 59, 142–159. https://doi.org/10.1016/j.mechmat.2012.10.003

Choi, Y.-T., & Kim, Y. R. (2013). Development of Calibration Testing Protocol for Permanent Deformation Model of Asphalt Concrete. TRANSPORTATION RESEARCH RECORD, (2373), 34–42. https://doi.org/10.3141/2373-04

Zhang, J., Sabouri, M., Guddati, M. N., & Kim, Y. R. (2013). Development of a failure criterion for asphalt mixtures under fatigue loading. ROAD MATERIALS AND PAVEMENT DESIGN, 14, 1–15. https://doi.org/10.1080/14680629.2013.812843

Zhang, J., Sabouri, M., Guddati, M. N., & Kim, Y. R. (2013). Development of a failure criterion for asphalt mixtures under fatigue loading. Asphalt paving technology 2013, vol 82, 82, 1–22.

Underwood, B. S., & Kim, Y. R. (2013). Effect of volumetric factors on the mechanical behavior of asphalt fine aggregate matrix and the relationship to asphalt mixture properties. Construction and Building Materials, 49, 672–681. https://doi.org/10.1016/j.conbuildmat.2013.08.045

Shan, L., Tan, Y., & Kim, Y. R. (2013). Establishment of a universal healing evaluation index for asphalt binder. CONSTRUCTION AND BUILDING MATERIALS, 48, 74–79. https://doi.org/10.1016/j.conbuildmat.2013.06.039

Park, H. J., & Kim, Y. R. (2013). Investigation into Top-Down Cracking of Asphalt Pavements in North Carolina. TRANSPORTATION RESEARCH RECORD, (2368), 45–55. https://doi.org/10.3141/2368-05

Im, J. H., & Kim, Y. R. (2013). Methods for Fog Seal Field Test with Polymer-Modified Emulsions Development and Performance Evaluation. TRANSPORTATION RESEARCH RECORD, (2361), 88–97. https://doi.org/10.3141/2361-11

Underwood, B. S., & Kim, Y. R. (2013). Microstructural Association Model for Upscaling Prediction of Asphalt Concrete Dynamic Modulus. Journal of Materials in Civil Engineering, 25(9), 1153–1161. https://doi.org/10.1061/(asce)mt.1943-5533.0000657

Underwood, B. S., & Kim, Y. R. (2013). Microstructural investigation of asphalt concrete for performing multiscale experimental studies. International Journal of Pavement Engineering, 14(5), 498–516. https://doi.org/10.1080/10298436.2012.746689

Underwood, B. S., & Kim, Y. R. (2013). Nonlinear Viscoelastic Behavior of Asphalt Concrete and Its Implication for Fatigue Modeling. Transportation Research Record: Journal of the Transportation Research Board, 2373(1), 100–108. https://doi.org/10.3141/2373-11

Lee, J.-S., Lee, J.-J., Kwon, S.-A., & Kim, Y. R. (2013). Use of Cyclic Direct Tension Tests and Digital Imaging Analysis to Evaluate Moisture Susceptibility of Warm-Mix Asphalt Concrete. TRANSPORTATION RESEARCH RECORD, (2372), 61–71. https://doi.org/10.3141/2372-08

Yun, T., & Kim, Y. R. (2013). Viscoelastoplastic modeling of the behavior of hot mix asphalt in compression. KSCE JOURNAL OF CIVIL ENGINEERING, 17(6), 1323–1332. https://doi.org/10.1007/s12205-013-0352-7

Lee, J., Lee, J., Kim, Y. R., & Mun, S. (2012). A Comparison Study of Friction Measurements for Chip Seal. JOURNAL OF TESTING AND EVALUATION, 40(4), 603–611. https://doi.org/10.1520/jte103863

Kim, Y., Alexander, W. E., & Edmonson, W. W. (2012). A Dataflow Framework for DSP Algorithm Refinement. 2012 IEEE COMPUTER SOCIETY ANNUAL SYMPOSIUM ON VLSI (ISVLSI), pp. 1-+. https://doi.org/10.1109/isvlsi.2012.74

Eslaminia, M., Thirunavukkarasu, S., Guddati, M. N., & Kim, Y. R. (2012). Accelerated Pavement Performance Modeling Using Layered Viscoelastic Analysis. In 7th RILEM International Conference on Cracking in Pavements (pp. 497–506). https://doi.org/10.1007/978-94-007-4566-7_48

Shan, L., Tan, Y., & Kim, Y. R. (2012). Applicability of the Cox-Merz relationship for asphalt binder. CONSTRUCTION AND BUILDING MATERIALS, 37, 716–722. https://doi.org/10.1016/j.conbuildmat.2012.07.020

Jadoun, F. M., & Kim, Y. R. (2012). Calibrating Mechanistic-Empirical Pavement Design Guide for North Carolina: Genetic Algorithm and Generalized Reduced Gradient Optimization Methods. TRANSPORTATION RESEARCH RECORD, (2305), 131–140. https://doi.org/10.3141/2305-14

Underwood, B. S., & Kim, Y. R. (2012). Comprehensive Evaluation of Small Strain Viscoelastic Behavior of Asphalt Concrete. Journal of Testing and Evaluation, 40(4), 104521. https://doi.org/10.1520/jte104521

Baek, C., Underwood, B. S., & Kim, Y. R. (2012). Effects of Oxidative Aging on Asphalt Mixture Properties. Transportation Research Record: Journal of the Transportation Research Board, 2296(1), 77–85. https://doi.org/10.3141/2296-08

Tan, Y., Shan, L., Kim, Y. R., & Underwood, B. S. (2012). Healing characteristics of asphalt binder. CONSTRUCTION AND BUILDING MATERIALS, 27(1), 570–577. https://doi.org/10.1016/j.conbuildmat.2011.07.006

Choi, Y.-T., Subramanian, V., Guddati, M. N., & Kim, Y. R. (2012). Incremental Model for Prediction of Permanent Deformation of Asphalt Concrete in Compression. TRANSPORTATION RESEARCH RECORD, (2296), 24–35. https://doi.org/10.3141/2296-03

Banadaki, A. D., Guddati, M. N., Kim, Y. R., & Little, D. N. (2012). Multiscale Micromechanical Lattice Modeling of Cracking in Asphalt Concrete. In 7th RILEM International Conference on Cracking in Pavements (pp. 487–496). https://doi.org/10.1007/978-94-007-4566-7_47

Underwood, B. S., Baek, C., & Kim, Y. R. (2012). Simplified Viscoelastic Continuum Damage Model as Platform for Asphalt Concrete Fatigue Analysis. Transportation Research Record: Journal of the Transportation Research Board, 2296(1), 36–45. https://doi.org/10.3141/2296-04

Baek, C., Thirunavukkarasu, S., Underwood, B. S., Guddati, M. N., & Kim, Y. R. (2012). Top-Down Cracking Prediction Tool for Hot Mix Asphalt Pavements. In 7th RILEM International Conference on Cracking in Pavements (pp. 465–474). https://doi.org/10.1007/978-94-007-4566-7_45

Yun, T., & Kim, Y. R. (2011). A viscoplastic constitutive model for hot mix asphalt in compression at high confining pressure. CONSTRUCTION AND BUILDING MATERIALS, 25(5), 2733–2740. https://doi.org/10.1016/j.conbuildmat.2010.12.025

Underwood, B. S., Kim, Y. R., & Corley-Lay, J. (2011). Assessment of Use of Automated Distress Survey Methods for Network-Level Pavement Management. Journal of Performance of Constructed Facilities, 25(3), 250–258. https://doi.org/10.1061/(asce)cf.1943-5509.0000158

Sayyady, F., Stone, J. R., List, G. F., Jadoun, F. M., Kim, Y. R., & Sajjadi, S. (2011). Axle load distribution for mechanistic-empirical pavement design in North Carolina multidimensional clustering approach and decision tree development. Transportation Research Record, (2256), 159–168.

Lee, J. S., Lee, S., & Kim, Y. R. (2011). Evaluation of Healing Effect by Rest Periods on Asphalt Concrete Slab Using MMLS3 and NDE Techniques. KSCE JOURNAL OF CIVIL ENGINEERING, 15(3), 553–560. https://doi.org/10.1007/s12205-011-0909-2

Yun, T., & Kim, Y. R. (2011). Experimental Investigation of Rate-Dependent Hardening-Softening Behavior of Hot Mix Asphalt in Compression. ROAD MATERIALS AND PAVEMENT DESIGN, 12(1), 99–114. https://doi.org/10.3166/rmpd.12.99-114

Yun, T., & Kim, Y. R. (2011). Experimental Investigation of Rate-Dependent Hardening-Softening Behavior of Hot Mix Asphalt in Compression. Road Materials and Pavement Design, 12(1), 99–114. https://doi.org/10.1080/14680629.2011.9690354

Underwood, B. S., Yun, T., & Kim, Y. R. (2011). Experimental Investigations of the Viscoelastic and Damage Behaviors of Hot-Mix Asphalt in Compression. Journal of Materials in Civil Engineering, 23(4), 459–466. https://doi.org/10.1061/(asce)mt.1943-5533.0000197

Underwood, B. S., & Kim, Y. R. (2011). Experimental investigation into the multiscale behaviour of asphalt concrete. International Journal of Pavement Engineering, 12(4), 357–370. https://doi.org/10.1080/10298436.2011.574136

Lee, S., Mun, S., & Kim, Y. R. (2011). Fatigue and rutting performance of lime-modified hot-mix asphalt mixtures. CONSTRUCTION AND BUILDING MATERIALS, 25(11), 4202–4209. https://doi.org/10.1016/j.conbuildmat.2011.04.059

Yun, T., & Kim, Y. R. (2011). Modeling of viscoplastic rate-dependent hardening-softening behavior of hot mix asphalt in compression. MECHANICS OF TIME-DEPENDENT MATERIALS, 15(1), 89–103. https://doi.org/10.1007/s11043-010-9116-7

Lacroix, A., Underwood, B. S., & Kim, Y. R. (2011). Reduced Testing Protocol for Measuring the Confined Dynamic Modulus of Asphalt Mixtures. Transportation Research Record: Journal of the Transportation Research Board, 2210(1), 20–29. https://doi.org/10.3141/2210-03

Shan, L., Tan, Y., Underwood, B. S., & Kim, Y. R. (2011). Thixotropic Characteristics of Asphalt Binder. Journal of Materials in Civil Engineering, 23(12), 1681–1686. https://doi.org/10.1061/(asce)mt.1943-5533.0000328

Underwood, S. B., & Kim, R. Y. (2011). Viscoelastoplastic Continuum Damage Model for Asphalt Concrete in Tension. Journal of Engineering Mechanics, 137(11), 732–739. https://doi.org/10.1061/(asce)em.1943-7889.0000277

Shan, L., Tan, Y., Underwood, S., & Kim, Y. R. (2010). Application of Thixotropy to Analyze Fatigue and Healing Characteristics of Asphalt Binder. Transportation Research Record: Journal of the Transportation Research Board, 2179(1), 85–92. https://doi.org/10.3141/2179-10

Sayyady, F., Stone, J. R., Taylor, K. L., Jadoun, F. M., & Kim, Y. R. (2010). Clustering Analysis to Characterize Mechanistic-Empirical Pavement Design Guide Traffic Data in North Carolina. TRANSPORTATION RESEARCH RECORD, (2160), 118–127. https://doi.org/10.3141/2160-13

Corley-Lay, J., Jadoun, F. M., Mastin, J. N., & Kim, Y. R. (2010). Comparison of Flexible Pavement Distresses Monitored by North Carolina Department of Transportation and Long-Term Pavement Performance Program. TRANSPORTATION RESEARCH RECORD, (2153), 91–96. https://doi.org/10.3141/2153-10

Lee, J., & Kim, Y. R. (2010). Determination of the optimal number of coverages for the rolling of chip seals. CANADIAN JOURNAL OF CIVIL ENGINEERING, 37(1), 54–65. https://doi.org/10.1139/l09-129

Sakhaeifar, M. S., Underwood, B. S., Kim, Y. R., Puccinelli, J., & Jackson, N. (2010). Development of Artificial Neural Network Predictive Models for Populating the Dynamic Moduli of Long-Term Pavement Performance Sections. Transportation Research Record: Journal of the Transportation Research Board, 2181(1), 88–97. https://doi.org/10.3141/2181-10

Lee, S., Seo, Y., & Kim, Y. R. (2010). Effect of hydrated lime on dynamic modulus of asphalt-aggregate mixtures in the state of North Carolina. KSCE JOURNAL OF CIVIL ENGINEERING, 14(6), 829–837. https://doi.org/10.1007/s12205-010-0944-4

Lee, J., & Kim, Y. R. (2010). Evaluation of Performance and Cost-Effectiveness of Polymer-Modified Chip Seals. TRANSPORTATION RESEARCH RECORD, (2150), 79–86. https://doi.org/10.3141/2150-10

Underwood, B. S., Kim, Y. R., & Guddati, M. N. (2010). Improved calculation method of damage parameter in viscoelastic continuum damage model. International Journal of Pavement Engineering, 11(6), 459–476. https://doi.org/10.1080/10298430903398088

Lee, S. J., Seo, Y., & Kim, Y. R. (2010). Nondestructive Fatigue Damage Analysis of a Thin Asphalt Concrete Course Using the Wavelet Correlation Method. JOURNAL OF TESTING AND EVALUATION, 38(3), 324–331. https://doi.org/10.1520/jte102417

Lee, J., & Kim, Y. R. (2010). Optimal Distribution of Rolling Coverage in Multiple Chip Seals. TRANSPORTATION RESEARCH RECORD, (2150), 70–78. https://doi.org/10.3141/2150-09

Lee, J., & Kim, Y. R. (2010). Optimizing Rolling Patterns for Chip Seals Using Laboratory Aggregate Loss Performance Tests on Field Fabricated Samples. JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES, 24(3), 249–257. https://doi.org/10.1061/(asce)cf.1943-5509.0000096

Feng, Z., Zhang, P., Guddati, M. N., & Kim, Y. R. (2010). The Development and Evaluation of a Virtual Testing Procedure for the Prediction of the Cracking Performance of Hot Mix Asphalt. Pavements and Materials. Presented at the Pavements and Materials: Characterization and Modeling Symposium at EMI Conference 2010. https://doi.org/10.1061/41129(385)13

Yun, T., Underwood, B. S., & Kim, Y. R. (2010). Time-Temperature Superposition for HMA with Growing Damage and Permanent Strain in Confined Tension and Compression. Journal of Materials in Civil Engineering, 22(5), 415–422. https://doi.org/10.1061/(asce)mt.1943-5533.0000039

Mitchell, M. R., Link, R. E., Underwood, B. S., Far, M. S. S., & Kim, Y. R. (2010). Using Limited Purchase Specification Tests to Perform Full Linear Viscoelastic Characterization of Asphalt Binder. Journal of Testing and Evaluation, 38(5), 102591. https://doi.org/10.1520/jte102591

Far, M. S. S., Underwood, B. S., Ranjithan, S. R., Kim, Y. R., & Jackson, N. (2009). Application of Artificial Neural Networks for Estimating Dynamic Modulus of Asphalt Concrete. Transportation Research Record: Journal of the Transportation Research Board, 2127(1), 173–186. https://doi.org/10.3141/2127-20

Mun, S., & Kim, Y. R. (2009). Backcalculation of subgrade stiffness under rubblised PCC slabs using multilevel FWD loads. INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 10(1), 9–18. https://doi.org/10.1080/10298430701827650

Underwood, B. S., & Kim, Y. R. (2009). Determination of the appropriate representative elastic modulus for asphalt concrete. International Journal of Pavement Engineering, 10(2), 77–86. https://doi.org/10.1080/10298430701827668

Lee, J. S., & Kim, Y. R. (2009). Performance-Based Uniformity Coefficient of Chip Seal Aggregate. TRANSPORTATION RESEARCH RECORD, (2108), 53–60. https://doi.org/10.3141/2108-06

Kim, Y. R., Baek, C., Underwood, B. S., Subramanian, V., Guddati, M. N., & Lee, K. (2008). Application of viscoelastic continuum damage model based finite element analysis to predict the fatigue performance of asphalt pavements. KSCE Journal of Civil Engineering, 12(2), 109–120. https://doi.org/10.1007/s12205-008-0109-x

Lacroix, A., Kim, Y. R., & Ranjithan, S. R. (2008). Backcalculation of Dynamic Modulus from Resilient Modulus of Asphalt Concrete with an Artificial Neural Network. TRANSPORTATION RESEARCH RECORD, (2057), 107–113. https://doi.org/10.3141/2057-13

Kim, Y. R., Lee, S. J., Se, Y., & El-Haggan, O. (2008). Determination of price reduction factors for density-deficient asphalt pavements. Journal of Testing and Evaluation, 36(4), 335–344. https://doi.org/10.1520/jte101460

Muthadi, N. R., & Kim, Y. R. (2008). Local Calibration of Mechanistic-Empirical Pavement Design Guide for Flexible Pavement Design. TRANSPORTATION RESEARCH RECORD, (2087), 131–141. https://doi.org/10.3141/2087-14

Lee, J. S., & Kim, Y. R. (2008). Understanding the effects of aggregate and emulsion application rates on performance of asphalt surface treatments. TRANSPORTATION RESEARCH RECORD, (2044), 71–78. https://doi.org/10.3141/2044-08

Seo, Y., & Kim, Y. R. (2008). Using Acoustic Emission to Monitor Fatigue Damage and Healing in Asphalt Concrete. KSCE JOURNAL OF CIVIL ENGINEERING, 12(4), 237–243. https://doi.org/10.1007/s12205-008-0237-3

Seo, Y. G., El-Haggan, O., King, M., Lee, S. J., & Kim, Y. R. (2007). Air void models for the dynamic modulus, fatigue cracking, and rutting of asphalt concrete. Journal of Materials in Civil Engineering, 19(10), 874–883. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:10(874)

Mun, S., Chehab, G. R., & Kim, Y. R. (2007). Determination of Time-domain Viscoelastic Functions using Optimized Interconversion Techniques. Road Materials and Pavement Design, 8(2), 351–365. https://doi.org/10.1080/14680629.2007.9690078

Lacroix, A., Khandan, A. A. M., & Kim, Y. R. (2007). Predicting the resilient modulus of asphalt concrete from the dynamic modulus. TRANSPORTATION RESEARCH RECORD, (2001), 132–140. https://doi.org/10.3141/2001-15

Kim, Y. R., Lee, S. J., Seo, Y., & El-Haggan, O. (2006). A Mechanistic Approach to Determine Price Reduction Factors for Density-Deficient Asphalt Pavements. Airfield and Highway Pavement. Presented at the Airfield and Highway Pavements Specialty Conference 2006. https://doi.org/10.1061/40838(191)86

Lee, S., Seo, Y., & Kim, Y. R. (2006). Experimental validation of laboratory performance models using the third scale accelerated pavement testing. KSCE Journal of Civil Engineering, 10(1), 9–14. https://doi.org/10.1007/BF02829299

Seo, Y., Kim, Y. R., & Zhang, Z. (2006). Laboratory evaluation of CCM parameters for mode-I cracks in HMAs. KSCE Journal of Civil Engineering, 10(3), 201–206. https://doi.org/10.1007/BF02824062

Lee, J., & Kim, Y. R. (2006). Performance Evaluation of Asphalt Surface Treatments Using the MMLS3. Airfield and Highway Pavement. Presented at the Airfield and Highway Pavements Specialty Conference 2006. https://doi.org/10.1061/40838(191)8

Lee, J., Kim, Y. R., & McGraw, E. O. (2006). Performance evaluation of bituminous surface treatment using third-scale Model Mobile Loading Simulator. In Managing and maintaining highway structures and pavements (pp. 59–70). https://doi.org/10.3141/1958-07

Lee, S. J., Seo, Y., & Kim, Y. R. (2006). Validation of material-level performance models - Using the third-scale Model Mobile Loading Simulator. In Pavement rehabilitation, strength and deformation characteristics, and surface properties-vehicle interaction 2006 (pp. 75–82). https://doi.org/10.3141/1949-07

Mun, S., Guddati, M. N., & Kim, Y. R. (2006). Viscoelastic continuum damage finite element modeling of asphalt pavements for fatigue cracking evaluation. KSCE Journal of Civil Engineering, 10(2), 97–104. https://doi.org/10.1007/BF02823927

Park, H. M., Kim, Y. R., & Park, S. W. (2005). Assessment of pavement layer condition with use of multiload-level failing weight deflectometer deflections. PAVEMENT REHABILITATION, STRENGTH AND DEFORMATION CHARACTERISTICS, AND SURFACE PROPERTIES 2005, pp. 107–116. https://doi.org/10.3141/1905-13

Mun, S., Guddati, M. N., & Kim, Y. R. (2005). Continuum damage finite element modeling of asphalt concrete. KSCE Journal of Civil Engineering, 9(3), 205–211. https://doi.org/10.1007/BF02829051

Underwood, S., Heidari, A. H., Guddati, M., & Kim, Y. R. (2005). Experimental Investigation of Anisotropy in Asphalt Concrete. Transportation Research Record: Journal of the Transportation Research Board, 1929(1), 238–247. https://doi.org/10.3141/1929-28

Lee, S. J., Rust, J. P., Hamouda, H., Kim, Y. R., & Borden, R. H. (2005). Fatigue cracking resistance of fiber-reinforced asphalt concrete. TEXTILE RESEARCH JOURNAL, 75(2), 123–128. https://doi.org/10.1177/004051750507500206

Chehab, G. R., & Kim, Y. R. (2005). Viscoelastoplastic continuum damage model application to thermal cracking of asphalt concrete. Journal of Materials in Civil Engineering, 17(4), 384–392. https://doi.org/10.1061/(ASCE)0899-1561(2005)17:4(384)

Nilsson, B. R., Chehab, G. R., & Kim, Y. R. (2004). Application of a viscoelastoplastic continuum damage tensile model to asphalt mixes in Sweden. Road Materials and Pavement Design, 5(sup1), 133–161. https://doi.org/10.1080/14680629.2004.9689991

Mun, S., & Kim, Y. R. (2004). Determination of subgrade stiffness under intact portland cement concrete slabs for rubblization projects. KSCE Journal of Civil Engineering, 8(5), 527–533. https://doi.org/10.1007/BF02899579

Kim, Y. R., Seo, Y., King, M., & Momen, M. (2004). Dynamic modulus testing of asphalt concrete in indirect tension mode. BITUMINOUS PAVING MIXTURES 2004, pp. 163–173. https://doi.org/10.3141/1891-19

Mun, S., Guddati, M. N., & Kim, Y. R. (2004). Fatigue cracking mechanisms in asphalt pavements with viscoelastic continuum damage finite-element program. PAVEMENT DESIGN AND ACCELERATED TESTING 2004, pp. 96–106. https://doi.org/10.3141/1896-10

Daniel, J. S., Chehab, G. R., & Kim, Y. R. (2004). Issues affecting measurement of the complex modulus of asphalt concrete. Journal of Materials in Civil Engineering, 16(5), 469–476. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:5(469)

Underwood, S., & Kim, Y. R. (2003). Determination of Depth of Surface Cracks in Asphalt Pavements. Transportation Research Record: Journal of the Transportation Research Board, 1853(1), 143–149. https://doi.org/10.3141/1853-16

Lee, H. J., Kim, Y. R., & Lee, S. W. (2003). Prediction of asphalt mix fatigue life with viscoelastic material properties. BITUMINOUS PAVING MIXTURES 2003, pp. 139–147. https://doi.org/10.3141/1832-17

Park, H. M., & Kim, Y. R. (2003). Prediction of remaining life of asphalt pavement with failing-weight deflectometer multiload-level deflections. In Pavement assessment, monitoring and evaluation 2003 (pp. 48–56). https://doi.org/10.3141/1860-06

Zhao, Y. Q., & Kim, Y. R. (2003). Time-temperature superposition for asphalt mixtures with growing damage and permanent deformation in compression. BITUMINOUS PAVING MIXTURES 2003, pp. 161–172. https://doi.org/10.3141/1832-20

Xu, B., Ranjithan, S. R., & Kim, Y. R. (2003). Using the asphalt pavement layer condition assessment program - Case studies. In Pavement assessment, monitoring and evaluation 2003 (pp. 66–75). https://doi.org/10.3141/1860-08

Seo, Y., Kim, Y. R., Witczak, M. W., & Bonaquist, R. (2002). Application of digital image correlation method to mechanical testing of asphalt-aggregate mixtures. BITUMINOUS PAVING MIXTURES 2002, pp. 162–172. https://doi.org/10.3141/1789-18

Xu, B., Ranjithan, S. R., & Kim, Y. R. (2002). New condition assessment procedure for asphalt pavement layers using failing weight deflectometer deflections. In Assessing and evaluating pavements, 2002 (pp. 57–69). https://doi.org/10.3141/1806-07

Xu, B., Ranjithan, S. R., & Kim, Y. R. (2002). New relationships between failing weight deflectometer deflections and asphalt pavement layer condition indicators. In Assessing and evaluating pavements, 2002 (pp. 48–56). https://doi.org/10.3141/1806-06

Wen, H. F., & Kim, Y. R. (2002). Simple performance test for fatigue cracking and validation with WesTrack mixtures. BITUMINOUS PAVING MIXTURES 2002, pp. 66–72. https://doi.org/10.3141/1789-07

Park, H. M., Kim, Y. R., & Park, S. (2002). Temperature correction of multiload-level failing weight deflectometer deflections. In Assessing and evaluating pavements, 2002 (pp. 3–8). https://doi.org/10.3141/1806-01

Guddati, M. N., Feng, Z., & Kim, Y. R. (2002). Toward a micromechanics-based procedure to characterize fatigue performance of asphalt concrete. BITUMINOUS PAVING MIXTURES 2002, pp. 121–128. https://doi.org/10.3141/1789-13

Park, S. W., & Kim, Y. R. (2001). Fitting prony-series viscoelastic models with power-law presmoothing. Journal of Materials in Civil Engineering, 13(1), 26–32. https://doi.org/10.1061/(asce)0899-1561(2001)13:1(26)

Daniel, J. S., & Kim, Y. R. (2001). Laboratory evaluation of fatigue damage and healing of asphalt mixtures. Journal of Materials in Civil Engineering, 13(6), 434–440. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:6(434)

Lee, H. J., Daniel, J. S., & Kim, Y. R. (2000). Continuum damage mechanics-based fatigue model of asphalt concrete. Journal of Materials in Civil Engineering, 12(2), 105–112. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(105)

Chehab, G. R., E O'Quinn, & Kim, Y. R. (2000). Specimen geometry tension test based study for direct on mechanical tests and air void variation in asphalt concrete specimens compacted by Superpave gyratory compactor. 2000 TRB DISTINGUISHED LECTURE, PT 1 - ASPHALT MIXTURES 2000, PT 2, pp. 125–132. https://doi.org/10.3141/1723-16

Park, S. W., Kim, Y. R., & Lee, H. J. (1999). Fracture toughness for microcracking in a viscoelastic particulate composite. Journal of Engineering Mechanics, 125(6), 722–725. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:6(722)

Park, S. W., & Kim, Y. R. (1999). Interconversion between relaxation modulus and creep compliance for viscoelastic solids. Journal of Materials in Civil Engineering, 11(1), 76–82. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:1(76)

Lee, H. J., Kim, Y. R., & Kim, S. H. (1999). Viscoelastic constitutive modeling of asphalt concrete with growing damage. STRUCTURAL ENGINEERING AND MECHANICS, 7(2), 225–240. https://doi.org/10.12989/sem.1999.7.2.225

Park, S. W., & Kim, Y. R. (1998). Analysis of layered viscoelastic system with transient temperatures. Journal of Engineering Mechanics, 124(2), 223–231. https://doi.org/10.1061/(asce)0733-9399(1998)124:2(223)

Lee, Y. C., Kim, Y. R., & Ranjithan, S. R. (1998). Dynamic analysis-based approach to determine flexible pavement layer moduli using deflection basin parameters. In Recent pavement research issues (pp. 36–42). https://doi.org/10.3141/1639-04

Daniel, J. S., Kim, Y. R., & Lee, H. J. (1998). Effects of aging on viscoelastic properties of asphalt-aggregate mixtures. ASPHALT MIXTURES, pp. 21–27. https://doi.org/10.3141/1630-03

Kim, Y., & Kim, Y. R. (1998). Prediction of layer moduli from falling weight deflectometer and surface wave measurements using artificial neural network. RECENT PAVEMENT RESEARCH ISSUES, pp. 53–61. https://doi.org/10.3141/1639-06

Daniel, J. S., & Kim, Y. R. (1998). Relationships among rate-dependent stiffnesses of asphalt concrete using laboratory and field test methods. In Asphalt mixtures: Stiffness characterization, variables and performance (pp. 3–9). https://doi.org/10.3141/1630-01

Lee, H. J., & Kim, Y. R. (1998). Viscoelastic constitutive model for asphalt concrete under cyclic loading. Journal of Engineering Mechanics, 124(1), 32–40. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:1(32)

Lee, H. J., & Kim, Y. R. (1998). Viscoelastic continuum damage model of asphalt concrete with healing. Journal of Engineering Mechanics, 124(11), 1224–1232. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:11(1224)

Khosla, N. P., Satish, S., Kim, N., & Kim, Y. R. (1997). A comparative study of performance of different designs for flexible pavements. Eighth International Conference on Asphalt Pavements, August 10-14, 1997, Seattle, Washington: Proceedings., 328–335. Seattle, Wash.: University of Washington.

Shao, L., Park, S., & Kim, Y. R. (1997). A simplified procedure for prediction of asphalt pavement subsurface temperatures based on heat transfer theories. In Pavement rehabilitation and design (pp. 114–123). https://doi.org/10.3141/1568-14

Kim, Y. R., Lee, H. J., & Little, D. N. (1997). Fatigue characterization of asphalt concrete using viscoelasticity and continuum damage theory. Journal of the Association of Asphalt Paving Technologists, 66(1997), 520–569.

Kim, Y., & Kim, Y. R. (1997). In-situ evaluation of fatigue damage growth and healing of asphalt concrete pavements using stress wave method. In Pavement rehabilitation and design (pp. 106–113). https://doi.org/10.3141/1568-13

Kim, Y. R., Lee, H. J., Kim, Y., & Little, D. N. (1997). Mechanistic evaluation of fatigue damage growth and healing of asphalt concrete: Laboratory and field experiments. Eighth International Conference on Asphalt Pavements, August 10-14, 1997, Seattle, Washington: Proceedings., 1089–1108. Seattle, Wash.: University of Washington.

Little, D. N., Lytton, R. L., Williams, D., & Kim, Y. R. (1997). Propagation and healing of microcracks in asphalt concrete and their contributions to fatigue. In Asphalt science and technology (pp. 149–195). New York, NY: Marcel Dekker, Inc.

Park, S., & Kim, Y. R. (1997). Temperature correction of backcalculated moduli and deflections using linear viscoelasticity and time-temperature superposition. In Pavement research issues (pp. 108–117). https://doi.org/10.3141/1570-13