Kavita Mathur

Youn, S., Knowles, C. G., Mills, A. C., & Mathur, K. (2024, February 2). Comparative study of physical and virtual fabric parameters: physical versus virtual drape test using commercial 3D garment software. JOURNAL OF THE TEXTILE INSTITUTE, Vol. 2. https://doi.org/10.1080/00405000.2024.2314273

Youn, S., West, A., & Mathur, K. (2024, April 8). Evaluation of a new artificial intelligence-based textile digitization using fabric drape. TEXTILE RESEARCH JOURNAL. https://doi.org/10.1177/00405175241236881

Mali, M., Salem, K. S., Sarder, R., Agate, S., Mathur, K., & Pal, L. (2024). Understanding Binding of Quaternary Ammonium Compounds with Cellulose-Based Fibers and Wipes for Renewable and Sustainable Hygiene Options. SUSTAINABILITY, 16(4). https://doi.org/10.3390/su16041586

Chen, Y., Hart, J., Suh, M., Mathur, K., & Yin, R. (2023). Electromechanical Characterization of Commercial Conductive Yarns for E-Textiles. Textiles. https://doi.org/10.3390/textiles3030020

Youn, S., Knowles, C. G., Ju, B., Sennik, B., Mathur, K., Mills, A. C., & Jur, J. S. (2023). Simulation-Based Contact Pressure Prediction Model to Optimize Health Monitoring Using E-Textile Integrated Garment. IEEE SENSORS JOURNAL, 23(16), 18316–18324. https://doi.org/10.1109/JSEN.2023.3293065

McCauley, P., Mathur, K., Henriques-Thompson, K., & Miab, R. K. (2023). The Impacts of Medical Textile Waste After COVID-19: Reviewing Challenges and Potential Solutions. Materials Circular Economy. https://doi.org/10.1007/s42824-023-00082-w

Wang, Z., Amanah, A. Y., Ali, K. M., Payne, L. C., Kisthardt, S., Scholle, F., … Gluck, J. M. (2022, November 2). A standardized procedure for quantitative evaluation of residual viral activity on antiviral treated textiles. TEXTILE RESEARCH JOURNAL, Vol. 11. https://doi.org/10.1177/00405175221126532

Mathur, K., Kabir, S. M. F., & Seyam, A.-F. M. (2022). Tensile properties of 3D printed continuous fiberglass reinforced cellular composites. The Journal of The Textile Institute, 12, 1–10. https://doi.org/10.1080/00405000.2020.1863567

DeBois, I. J., Agarwal, E., Kapoor, A., & Mathur, K. (2022). Tribology of the sock-skin Interface - the influence of different fabric parameters on sock friction. JOURNAL OF FOOT AND ANKLE RESEARCH, 15(1). https://doi.org/10.1186/s13047-022-00560-5

Kabir, S. M. F., Mathur, K., & Seyam, A.-F. M. (2021). Comparing Performance of 3D-Printed and Injection-Molded Fiber-Reinforced Composite Parts in Ring-Spinning Traveler Application. TECHNOLOGIES, 9(4). https://doi.org/10.3390/technologies9040075

Kabir, S. M. F., Mathur, K., & Seyam, A.-F. M. (2021). Maximizing the Performance of 3D Printed Fiber-Reinforced Composites. JOURNAL OF COMPOSITES SCIENCE, 5(5). https://doi.org/10.3390/jcs5050136

Baby, R., Mathur, K., & DenHartog, E. (2021). Nondestructive quantitative evaluation of yarns and fabrics and determination of contact area of fabrics using x-ray micro-computed tomography system for skin-textiles friction analysis. ACS Applied Materials & Interfaces, 13(3), 4652–4664. https://doi.org/10.1021/acsami.0c18300

Correia, J., Mathur, K., Bourham, M., Oliveira, F. R., Siqueira Curto Valle, R. D. C., Valle, J. A. B., & Seyam, A.-F. M. (2021). Surface functionalization of greige cotton knitted fabric through plasma and cationization for dyeing with reactive and acid dyes. Cellulose, 28(15), 9971–9990. https://doi.org/10.1007/s10570-021-04143-8

Yu, Y., Kim, G., & Mathur, K. (2020). A critical review of additive manufacturing: An innovation of mass customization. Journal of Textile and Apparel, Technology and Management, 11(3). Retrieved from https://ojs.cnr.ncsu.edu/index.php/JTATM/article/view/16727

Kabir, S. M. F., Mathur, K., & Seyam, A.-F. M. (2020). A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties. Composite Structures, 232, 111476. https://doi.org/10.1016/j.compstruct.2019.111476

Annett-Hitchcock, K., Porterfield, A., Absher, K., Buie, T., & Mathur, K. (2020). Clothing Experiences of Consumers with Body Asymmetry and their Interaction with Three-Dimensional (3D) Visualization Technology. The International Journal of Design in Society, 14(4), 1–18. https://doi.org/10.18848/2325-1328/CGP/v14i04/1-18

Kabir, S. M. F., Mathur, K., & Seyam, A.-F. M. (2020). Impact resistance and failure mechanism of 3D printed continuous fiber-reinforced cellular composites. The Journal of The Textile Institute, 6, 1–15. https://doi.org/10.1080/00405000.2020.1778223

Mathur, K. (2020). Introduction to fibers and yarns. In Textiles Swatch Book. Raleigh, NC: Wilson College of Textiles, North Carolina State University.

Mathur, K. (2020). Introduction to nonwovens. In Textiles Swatch Book. Raleigh, NC: Wilson College of Textiles, North Carolina State University.

Mathur, K. (2020, May). New Developments In Fibers, Yarns & Fabrics: Closed loop systems and circular economies are two ways the fiber, yarn and fabric industries are tackling sustainability issues. Textile World, 170(3), 32–35.

Balachandran, P., Mathur, K., & Ritter, J. T. (2020). Retrospective Clinical Surveillance Measuring Healthcare Associated Infection (HAI) Rates Pre-and Post-Inclusion of Novel Silver Ion Antimicrobial Textile Intervention in an Infection Control Program. https://doi.org/10.1101/2020.12.09.20246702

Baby, R., Mathur, K., & DenHartog, E. (2020). Skin-textiles friction: importance and prospects in skin comfort and in healthcare in prevention of skin injuries. The Journal of The Textile Institute, 112(9), 1–17. https://doi.org/10.1080/00405000.2020.1827582

Kabir, S. M. F., Mathur, K., & Seyam, A.-F. M. (2020). The Road to Improved Fiber-Reinforced 3D Printing Technology. Technologies, 8(4), 51. https://doi.org/10.3390/technologies8040051

Mathur, K. (2019). ITMA 2019 - New Developments in Fibers, Yarns and Fabrics. Journal of Textile and Apparel, Technology and Management, 11(2019 Special Issue). Retrieved from https://ojs.cnr.ncsu.edu/index.php/JTATM/article/view/16600

Kabir, S. M. F., Chakraborty, S., Hoque, S. M. A., & Mathur, K. (2019). Sustainability Assessment of Cotton-Based Textile Wet Processing. Clean Technologies, 1(1), 232–246. https://doi.org/10.3390/cleantechnol1010016

Mathur, K. (2018). Advancements in pattern coloration for jacquard woven tapestry fabrics. Journal of Textile and Apparel, Technology and Management, 10(4), 232–246. Retrieved from https://ojs.cnr.ncsu.edu/index.php/JTATM/article/view/14860

Seyam, A. M., & Mathur, K. (2012). A General Geometrical Model for Predicting Color Mixing of Woven Fabrics from Colored Warp and Filling Yarns. Fibers and Polymers, 13(6), 795–801. https://doi.org/10.1007/s12221-012-0795-3

Twersky, J., Montgomery, T., Sloane, R., Weiner, M., Doyle, S., Mathur, K., … Schmader, K. (2012). A Randomized, Controlled Study to Assess the Effect of Silk-like Textiles and High-absorbency Adult Incontinence Briefs on Pressure Ulcer Prevention. Ostomy Wound Management, 58(12), 18–24.

Montgomery, T., Mathur, K., & McPhail, L. (2012). Clinical study to evaluate the efficacy of a silk-like fabric as used in the prevention of pressure ulcers. Journal of Wound, Ostomy, and Continence Nursing, 39(3), S68.

Mathur, K., & Seyam, A. M. (2011). Color and Weave Relationship in Woven Fabrics. In S. Vassiliadis (Ed.), Advances in Modern Woven Fabrics Technology. https://doi.org/10.5772/20856

Mathur, K., Hinks, D., Seyam, A.-F. M., & Donaldson, R. A. (2009). Towards Automation of Color/Weave Selection in Jacquard Design: Model Verification. COLOR RESEARCH AND APPLICATION, 34(3), 225–232. https://doi.org/10.1002/col.20494

Mathur, K., Seyam, A. M., Hinks, D., & Donaldson, R. A. (2008). Prediction of Color Attributes through Geometric Modeling. Research Journal of Textile and Apparel, 12(1), 19–31. https://doi.org/10.1108/rjta-12-01-2008-b003

Mathur, K., ElNashar, E., Hauser, P. J., & Seyam, A. M. (2008, April). Stretch Potential Of Woven Fabrics Containing Spandex. Presented at the 5th Annual Conference, National Research Center, Cairo, Egypt.

Mathur, K., Vallabh, R., Hauser, P., & Seyam, A. M. (2008, August). Stretch Properties of Knitted Fabrics Containing Spandex. Presented at the Textiles Future Conference, Raleigh, NC.

Mathur, K., Seyam, A. M., Hinks, D., & Donaldson, R. A. (2008, August). Towards Automation of Color/Weave Selection in Jacquard Designs. Presented at the Textiles Future Conference, Raleigh, NC.

Mathur, K., Seyam, A.-F. M., Hinks, D., & Donaldson, R. A. (2008). Towards automation of colour/weave selection in Jacquard designs: model verification through visual assessment. COLORATION TECHNOLOGY, 124(1), 48–55. https://doi.org/10.1111/j.1478-4408.2007.00121.x

Seyam, A. M., & Mathur, K. (2007). Conversion of Fibers to Yarn for High-Speed High Quality Carpet Weaving. 4th Annual Conference, National Research Center. Cairo, Egypt.

Mathur, K., Seyam, A. M., Hinks, D., & Donaldson, A. (2007, April). Woven Jacquards on Demand: Automatic Matching of Design to target through Modeling Color in terms of weave structure. Presented at the 4th Annual Conference, National Research Center, Cairo, Egypt.

Mathur, K., Donaldson, A., Hinks, D., Seyam, A.-F., & on, C. (2005). Color on Demand for Jacquard Fabrics. Research Journal of Textile and Apparel, 9(4), 26–37. https://doi.org/10.1108/rjta-09-04-2005-b003

Mathur, K., Donaldson, A., Hinks, D., & Seyam, A. M. (2005, July). Pattern Coloration on Demand for Jacquard Woven Tapestry Fabrics. Presented at the Ars Textrina International Textiles Conference, University of Leeds, Leeds, UK.

Nachane, R. P., Ahmed, M., & Mathur, K. (2002, June). A new method for measuring Distortion in Cotton Knit. Presented at the National seminar organized by Central Institute of Research on Cotton Technology (CIRCOT) and Indian Fiber Society, Mumbai, India.