Landon Grace Guha, R. D., Berkowitz, K., & Grace, L. R. (2024). A coupled approach of spatial dielectric mapping and unsupervised machine learning for damage detection and severity segmentation in polymer matrix composites. NDT & E INTERNATIONAL, 145. https://doi.org/10.1016/j.ndteint.2024.103137 Berkowitz, K., Guha, R. D., Oluwajire, O., & Grace, L. R. (2024, August 13). Verification and validation of dielectric mapping technique for non-destructive evaluation of polymer matrix composites. POLYMER COMPOSITES. https://doi.org/10.1002/pc.28848 Guha, R. D., Danilov, E. O., Berkowitz, K., Oluwajire, O., & Grace, L. R. (2023, January 3). Consequences of Humidity Cycling on the Moisture Absorption Characteristics of Epoxy Resins with Different Network Architectures. ACS APPLIED POLYMER MATERIALS, Vol. 1. https://doi.org/10.1021/acsapm.2c01570 Guha, R. D., Danilov, E. O., Berkowitz, K., Oluwajire, O., & Grace, L. R. (2023). Suppressing Hydrogen Evolution in Aqueous Lithium-Ion Batteries with Double-Site Hydrogen Bonding. ACS APPLIED POLYMER MATERIALS, 5(1), 400–411. https://doi.org/10.1021/acsapm.2c01570400 Kaskar, O. G., Wells-Gray, E., Fleischman, D., & Grace, L. (2022). Evaluating machine learning classifiers for glaucoma referral decision support in primary care settings. SCIENTIFIC REPORTS, 12(1). https://doi.org/10.1038/s41598-022-12270-w Idolor, O., Berkowitz, K., Guha, R. D., & Grace, L. (2022). Nondestructive examination of polymer composites by analysis of polymer-water interactions and damage-dependent hysteresis. COMPOSITE STRUCTURES, 287. https://doi.org/10.1016/j.compstruct.2022.115377 Guha, R. D., Rahmani, F., Berkowitz, K., Pasquinelli, M., & Grace, L. R. (2022). Temporal evolution of the behavior of absorbed moisture in a damaged polymer-quartz composite: A molecular dynamics study. COMPUTATIONAL MATERIALS SCIENCE, 214. https://doi.org/10.1016/j.commatsci.2022.111690 Casimir, A. T., Pavone, A. M., Faircloth, A., Khan, A., Khawaja, O., Grace, L., … McLaughlin, A. C. (2021). A Human Factors Evaluation of a Screening System for Diabetic Retinopathy Centered in Psychological Theory. Ergonomics in Design: The Quarterly of Human Factors Applications, 32(1), 26–38. https://doi.org/10.1177/10648046211039911 Idolor, O., Guha, R. D., Berkowitz, K., & Grace, L. (2021). An experimental study of the dynamic molecular state of transient moisture in damaged polymer composites. POLYMER COMPOSITES, 42(7), 3391–3403. https://doi.org/10.1002/pc.26066 Guha, R. D., Idolor, O., Berkowitz, K., Pasquinelli, M., & Grace, L. R. (2021). Exploring secondary interactions and the role of temperature in moisture-contaminated polymer networks through molecular simulations. SOFT MATTER, 17(10), 2942–2956. https://doi.org/10.1039/d0sm02009e Guha, R. D., Idolor, O., Berkowitz, K., Pasquinelli, M., & Grace, L. R. (2021, May 28). Exploring secondary interactions and the role of temperature in moisture-contaminated polymer networks through molecular simulations (vol 17, pg 2942, 2021). SOFT MATTER, Vol. 5. https://doi.org/10.1039/d1sm90100a Ju, B., Kim, I., Li, B. M., Knowles, C. G., Mills, A., Grace, L., & Jur, J. S. (2021, July 1). Inkjet Printed Textile Force Sensitive Resistors for Wearable and Healthcare Devices. ADVANCED HEALTHCARE MATERIALS, Vol. 7. https://doi.org/10.1002/adhm.202100893 Idolor, O., Guha, R. D., Berkowitz, K., Geiger, C., Davenport, M., & Grace, L. (2021). Polymer-water interactions and damage detection in polymer matrix composites. COMPOSITES PART B-ENGINEERING, 211. https://doi.org/10.1016/j.compositesb.2021.108637 Guha, R. D., Idolor, O., & Grace, L. (2020). An atomistic simulation study investigating the effect of varying network structure and polarity in a moisture contaminated epoxy network. COMPUTATIONAL MATERIALS SCIENCE, 179. https://doi.org/10.1016/j.commatsci.2020.109683 Weisson, E. H., Fittipaldi, M., Concepcion, C. A., Pelaez, D., Grace, L., & Tse, D. T. (2020). Automated Noncontact Facial Topography Mapping, 3-Dimensional Printing, and Silicone Casting of Orbital Prosthesis. AMERICAN JOURNAL OF OPHTHALMOLOGY, 220, 27–36. https://doi.org/10.1016/j.ajo.2020.06.032 Fleischman, D., Kaskar, O., Shams, R., Zhang, X., Olson, D., Zdanski, C., … Lee, Y. Z. (2019). A Novel Porcine Model for the Study of Cerebrospinal Fluid Dynamics: Development and Preliminary Results. FRONTIERS IN NEUROLOGY, 10. https://doi.org/10.3389/fneur.2019.01137 Kaskar, O. G., Fleischman, D., Lee, Y. Z., Thorp, B. D., Kuznetsov, A. V., & Grace, L. (2019). Identifying the Critical Factors Governing Translaminar Pressure Differential Through a Compartmental Model. INVESTIGATIVE OPHTHALMOLOGY & VISUAL SCIENCE, 60(8), 3204–3214. https://doi.org/10.1167/iovs.18-26200 Rodriguez, L. A., Damley-Strnad, A., & Grace, L. R. (2019). Temperature and anisotropy effects in the application of the hindered diffusion model to composite laminates. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 38(13), 628–639. https://doi.org/10.1177/0731684419839220 Morales, B., Kaskar, O., & Grace, L. R. (2018). Design and processing of an elastomeric nanocomposite for biomedical pressure sensing applications. MATERIALS TODAY COMMUNICATIONS, 17, 278–288. https://doi.org/10.1016/j.mtcomm.2018.09.019 Fittipaldi, M., & Grace, L. R. (2018). Modeling the effects of lipid contamination in poly(styrene-isobutylene-styrene) (SIBS). JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 80, 97–103. https://doi.org/10.1016/j.jmbbm.2018.01.030 Fittipaldi, M., & Grace, L. R. (2017). Lipid-induced degradation in biocompatible poly(Styrene-Isobutylene-Styrene) (SIBS) thermoplastic elastomer. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 68, 80–87. https://doi.org/10.1016/j.jmbbm.2017.01.031 Damley-Strnad, A., Fittipaldi, M., Morales, B., & Grace, L. R. (2017). The effect of lipid absorption on the mechanical properties of poly(styrene-block-isobutylene-block-styrene) for use in biomedical applications. Presented at the PROCEEDINGS OF PPS-32: The 32nd International Conference of the Polymer Processing Society - Conference Papers. https://doi.org/10.1063/1.5016760 Fittipaldi, M., & Grace, L. R. (2016). Lipid diffusion and swelling in a phase separated biocompatible thermoplastic elastomer. Journal of the Mechanical Behavior of Biomedical Materials, 64, 1–9. https://doi.org/10.1016/J.JMBBM.2016.07.016 Rodriguez, L. A., Garcia, C., & Grace, L. R. (2018). Long-term durability of a water-contaminated quartz-reinforced bismaleimide laminate. POLYMER COMPOSITES, 39(8), 2643–2649. https://doi.org/10.1002/pc.24255 Fittipaldi, M., Garcia, C., Rodriguez, L. A., & Grace, L. R. (2016). Optimization of injection molding parameters for poly(styrene-isobutylene-styrene) block copolymer. Presented at the PROCEEDINGS OF PPS-31: The 31st International Conference of the Polymer Processing Society – Conference Papers. https://doi.org/10.1063/1.4942269 Rodriguez, L. A., García, C., Fittipaldi, M., & Grace, L. R. (2016). Reversible dielectric property degradation in moisture-contaminated fiber-reinforced laminates. Presented at the PROCEEDINGS OF PPS-31: The 31st International Conference of the Polymer Processing Society – Conference Papers. https://doi.org/10.1063/1.4942332 Garcia, C., Fittipaldi, M., & Grace, L. R. (2015). Effect of nanoclay reinforcement on the X-band dielectric properties of epoxy resins for use in radome applications. Presented at the PROCEEDINGS OF PPS-30: The 30th International Conference of the Polymer Processing Society – Conference Papers. https://doi.org/10.1063/1.4918450 García, C., Fittipaldi, M., & Grace, L. R. (2015). Epoxy/montmorillonite nanocomposites for improving aircraft radome longevity. Journal of Applied Polymer Science, 132(43), n/a-n/a. https://doi.org/10.1002/APP.42691 Fittipaldi, M., Rodriguez, L. A., Damley-Strnad, A., & Grace, L. R. (2015). Improving tensile strength of an injection-molded biocompatible thermoplastic elastomer. Materials & Design, 86, 6–13. https://doi.org/10.1016/J.MATDES.2015.07.070 Grace, L. R. (2016). Projecting long-term non-Fickian diffusion behavior in polymeric composites based on short-term data: a 5-year validation study. Journal of Materials Science, 51(2), 845–853. https://doi.org/10.1007/S10853-015-9407-0 Rodriguez, L. A., García, C., & Grace, L. R. (2015). The effect of in-service aerospace contaminants on X-band dielectric properties of a bismaleimide/quartz composite. Presented at the PROCEEDINGS OF PPS-30: The 30th International Conference of the Polymer Processing Society – Conference Papers. https://doi.org/10.1063/1.4918423 Grace, L. R. (2015). The effect of moisture contamination on the relative permittivity of polymeric composite radar-protecting structures at X-band. Composite Structures, 128, 305–312. https://doi.org/10.1016/J.COMPSTRUCT.2015.03.070 Fittipaldi, M., Rodriguez, L. A., & Grace, L. R. (2015). The effect of water absorption on the viscoelastic properties of poly(styrene-block-isobutylene-block-styrene) for use in biomedical applications. Presented at the PROCEEDINGS OF PPS-30: The 30th International Conference of the Polymer Processing Society – Conference Papers. https://doi.org/10.1063/1.4918393 Grace, L. R., & Altan, M. C. (2013). Non-fickian three-dimensional hindered moisture absorption in polymeric composites: Model development and validation. Polymer Composites, 34(7), 1144–1157. https://doi.org/10.1002/PC.22523 Grace, L. R., & Altan, M. C. (2014). Three-dimensional anisotropic moisture absorption in quartz-reinforced bismaleimide laminates. Polymer Engineering & Science, 54(1), 137–146. https://doi.org/10.1002/PEN.23549 Grace, L. R., & Altan, M. C. (2012). Characterization of anisotropic moisture absorption in polymeric composites using hindered diffusion model. Composites Part A: Applied Science and Manufacturing, 43(8), 1187–1196. https://doi.org/10.1016/j.compositesa.2012.03.016