@article{balestra_henry_carlyon_english_myer_avramova_epiney_strydom_2020, title={Modular high temperature gas reactor core modeling with RELAP5-3D/ PHISICS ? Optimization schemes for load following}, volume={362}, ISSN={["1872-759X"]}, DOI={10.1016/j.nucengdes.2020.110526}, abstractNote={The objective of this study is to develop a 3D neutron kinetic (NK) and thermal hydraulic (TH) coupled model using the INL developed code RELAP5-3D©/PHISICS to study the load following operation of a Modular High-Temperature Gas-Cooled Reactor (MHTGR). The selected design is the 350 MW prismatic, graphite moderated, helium cooled thermal reactor based on the MHTGR-350 transient benchmark led by the High-Temperature Gas-Cooled Reactor (HTGR) Methods Core Simulation Group at Idaho National Laboratory (INL) in the framework of the Organization for Economic Cooperation and Development Nuclear Energy Agency (OECD/NEA). This kind of reactor usually reacts very slowly to the perturbation of the core parameters due to the large amount of graphite in the core. This kind of behavior promotes the reactor stability but on the other hand limits the reactor load-following operability. Recently advances in gas reactor designs have made load-following a feasible and achievable goal. Modern nuclear reactors (such as the MHTGR-350) are designed to withstand the structural stresses associated with load-following. Operating the reactor in load-following mode will inevitably reduce the load factor. Although a higher load factor means more revenue and the best usage of the fuel, following the variable energy demand will increase the maximum achievable fraction of generated nuclear power, being no more limited to the base load power generation. In general, if low impact on material aging and the safe operability are demonstrated, the plant economics will be minimally affected. In order to ensure that the system can be safely operated in a load-following mode, an extensively study has been carried out. Some tests with linear change in coolant mass flow rate demonstrated that the reactor behavior is suitable for operation in load following mode. This assumption has been confirmed by a 4 days load following transient test in which the reactor supplied the requested power with a negligible error.}, journal={NUCLEAR ENGINEERING AND DESIGN}, author={Balestra, Paolo and Henry, Keion and Carlyon, Cameron and English, Cody and Myer, Jaylon and Avramova, Maria and Epiney, Aaron and Strydom, Gerhard}, year={2020}, month={Jun} }