Works (126)

Updated: November 15th, 2024 00:30

2024 article

Current Progress in Aqueous Corrosion of Multi-Principal Element Alloys

Ghorbani, M., Li, Z., Qiu, Y., Marcus, P., Scully, J. R., Gharbi, O., … Birbilis, N. (2024, June 15). METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 6.

Sources: Web Of Science, NC State University Libraries
Added: June 24, 2024

2024 journal article

Effect of V Content on Corrosion Behavior of Al-V Alloys Produced by Mechanical Alloying and Subsequent Spark Plasma Sintering

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 171(3).

By: C. Witharamage*, J. Christudasjustus*, G. Walunj*, T. Borkar* & R. Gupta n

author keywords: high energy ball milling; spark plasma sintering; corrosion mechanisms; pitting corrosion; electrochemical heterogeneity
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: March 1, 2024

2024 journal article

Improved Tribological Performance of Nitride-Reinforced Biocompatible Titanium-Niobium-Zirconium-Tantalum (TNZT) Alloys for Advanced Orthopedic Applications

METALS, 14(1).

By: S. Digole*, J. Desai*, C. Christopher*, S. Bohara*, C. Witharamage n, C. Kothapalli*, R. Gupta n, T. Borkar*

author keywords: TNZT alloys; microstructure; nitrides; wear resistance; biocompatibility
TL;DR: This work aims to address the issue of inferior tribological properties of β-Ti alloys by incorporating biocompatible nitrides in Ti-Nb-Zr-Ta (TNZT) β-Ti alloys, which will aid in producing superior β-Ti alloys for advanced orthopedic applications. (via Semantic Scholar)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: January 28, 2024

2024 journal article

Influence of Spatter on Porosity, Microstructure, and Corrosion of Additively Manufactured Stainless Steel Printed Using Different Island Size

CRYSTALS, 14(4).

By: V. Vukkum n, T. Sanborn n, J. Shepherd n, S. Saptarshi n, R. Basu n, T. Horn n, R. Gupta n

author keywords: additive manufacturing; laser powder bed fusion; stainless steel; microstructure; corrosion
Sources: ORCID, Web Of Science, NC State University Libraries
Added: April 1, 2024

2024 article

Investigation of Protective Coatings for Reducing High-Temperature Oxidation of Steels

Mugale, M., Choudhari, A., Karki, S., Desai, J., Walunj, G., Vukkum, V. B., … Borkar, T. (2024, October 7). JOM, Vol. 10.

By: M. Mugale, A. Choudhari, S. Karki, J. Desai, G. Walunj, V. Vukkum*, D. Schwam, R. Gupta*, T. Borkar

Sources: Web Of Science, NC State University Libraries
Added: October 21, 2024

2024 journal article

On the microstructure, corrosion behavior and surface films of the multi-principal element alloy CrNiTiV

ELECTROCHIMICA ACTA, 505.

By: S. O'Brien*, A. Darwish*, E. DelVecchio, R. Mehta*, N. Birbilis & R. Gupta*

author keywords: Multi-principal element alloy (MPEA); High-entropy alloy (HEA); Corrosion; Passivity; Surface film
Sources: ORCID, Web Of Science, NC State University Libraries
Added: September 1, 2024

2024 journal article

Spark Plasma Sintering of Pure Titanium: Microstructure and Mechanical Characteristics

MATERIALS, 17(14).

By: S. Digole*, S. Karki*, M. Mugale*, A. Choudhari*, R. Gupta n & T. Borkar*

author keywords: spark plasma sintering; titanium; grain size; relative density; mechanical property
Sources: ORCID, Web Of Science, NC State University Libraries
Added: July 22, 2024

2023 journal article

(Corrosion Division Rusty Award for Mid-Career Excellence) Enhancing the Corrosion Resistance of Additively Manufactured Metallic Materials: The Role of Feedstock Modification

ECS Meeting Abstracts.

By: R. Gupta n, B. Vukkum n & A. Darwish n

Source: ORCID
Added: February 9, 2024

2023 journal article

Enhanced wear and corrosion resistances of Al coated Mg alloy using high pressure cold sprayed commercially pure-zirconium coating

MATERIALS LETTERS, 346.

author keywords: Mg alloy; Metallic coating; Corrosion; Tribological performance
Sources: Web Of Science, NC State University Libraries
Added: June 19, 2023

2023 journal article

Evolution of surface film in AA2024-T3 after a long-term immersion in NaCl solution

CORROSION SCIENCE, 215.

By: J. Christudasjustus n, V. Vukkum n & R. Gupta n

author keywords: AA2024; Cu clusters; Corrosion product; Pitting corrosion; Aluminum alloys
Sources: Web Of Science, NC State University Libraries, ORCID
Added: April 4, 2023

2023 journal article

Influence of carbon nanotubes on microstructure and corrosion performance of additively manufactured 316L stainless steel

Corrosion Science, 224, 111494.

Source: ORCID
Added: October 26, 2024

2023 journal article

Intergranular Corrosion of CNT-Reinforced and Laser Powder Bed Fusion-Printed 316L Stainless Steel

JOM, 76(1), 232–237.

By: V. Vukkum n, T. Ansell*, A. Nieto* & R. Gupta n

UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: March 4, 2024

2023 article

Intergranular Corrosion of CNT-Reinforced and Laser Powder Bed Fusion-Printed 316L Stainless Steel

Vukkum, V. B., Ansell, T. Y., Nieto, A., & Gupta, R. K. (2023, October 4). JOM, Vol. 10.

By: V. Vukkum, T. Ansell, A. Nieto & R. Gupta

UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: October 23, 2023

2023 journal article

Intergranular Corrosion of Feedstock Modified-Additively Manufactured Stainless Steel After Sensitization

CORROSION, 79(6), 624–636.

author keywords: additive manufacturing; feedstock; intergranular corrosion; laser powder bed fusion; microstructure; stainless steel
UN Sustainable Development Goal Categories
Sources: ORCID, Web Of Science, NC State University Libraries
Added: June 5, 2023

2023 journal article

Microstructure and corrosion of CrFeMnV multi-principal element alloy

CORROSION SCIENCE, 222.

author keywords: Multi-principal element alloy; Compositionally complex alloys; High entropy alloys; Corrosion; Surface film
Sources: Web Of Science, NC State University Libraries
Added: August 21, 2023

2023 journal article

Pitting corrosion behavior and corrosion protection performance of cold sprayed double layered noble barrier coating on magnesium-based alloy in chloride containing solutions

JOURNAL OF MAGNESIUM AND ALLOYS, 11(9), 3099–3119.

author keywords: Ti coating; Mg alloys; Localized corrosion; Passivity; Dislocation density; Crystallite size
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: December 18, 2023

2023 book

Recent Advances in Material, Manufacturing, and Machine Learning

By: R. Gupta, N. Shrivastava, D. Deshmukh, A. Patil, J. Giri & R. Chadge

Source: ORCID
Added: May 21, 2023

2023 book

Recent Advances in Material, Manufacturing, and Machine Learning

By: R. Gupta, N. Shrivastava, D. Deshmukh, A. Patil, J. Giri & R. Chadge

Source: ORCID
Added: May 21, 2023

2023 journal article

Study on the corrosion behavior of cold sprayed aluminum-based coatings on Mg-based alloy in chloride containing solution: Effect of N-2 processing gas temperature

CORROSION SCIENCE, 223.

author keywords: Magnesium; X-ray diffraction; EIS; Corrosion; Surface
Sources: Web Of Science, NC State University Libraries
Added: September 18, 2023

2023 journal article

Surface Film Formation on Al-V Alloys with Far-From-Equilibrium Microstructure

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 170(3).

By: J. Christudasjustus n, C. Witharamage n, V. Vukkum n, G. Walunj*, T. Borkar* & R. Gupta n

author keywords: Surface film; grain orientation; ball milling; Aluminum alloys; nanocrystalline alloys; corrosion; chloride penetration
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: April 19, 2023

2023 journal article

Time-Dependent Corrosion Behavior of Aluminum Using Advanced Electrochemical and Characterization Techniques

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 170(9).

By: C. Witharamage n, A. Darwish n, J. Christudasjustus n, J. Soltis & R. Gupta n

Sources: Web Of Science, NC State University Libraries, ORCID
Added: October 10, 2023

2022 article

3D printed carbon nanotube reinforced stainless steel via selective lase melting

Nieto, A., Vukkum, V. B., Jalagam, P., Nema, K., Budan, J., Gupta, R. K., & Ansell, T. Y. (2022, August 10). MRS COMMUNICATIONS, Vol. 8.

By: A. Nieto*, V. Vukkum n, P. Jalagam*, K. Nema n, J. Budan*, R. Gupta n, T. Ansell*

UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 22, 2022

2022 journal article

Age-hardening behavior, corrosion mechanisms, and passive film structure of nanocrystalline Al-V supersaturated solid solution

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 135, 1–12.

By: J. Christudasjustus n, M. Felde*, C. Witharamage n, J. Esquivel*, A. Darwish n, C. Winkler n, R. Gupta n

author keywords: Al alloys; Nanocrystalline alloy; Age-hardening; Ball milling; Corrosion; Hardness
UN Sustainable Development Goal Categories
Sources: Web Of Science, ORCID, NC State University Libraries
Added: October 11, 2022

2022 journal article

Aluminum alloys with high elastic modulus

MATERIALS LETTERS, 320.

By: J. Christudasjustus n, T. Larimian*, J. Esquivel*, S. Gupta*, A. Darwish n, T. Borkar*, R. Gupta n

author keywords: Nanocrystalline materials; Mechanical alloying; Elastic modulus; Nanoindentation; Spark plasma sintering
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: June 6, 2022

2022 chapter

Corrosion Management: Current Status and its Relevance for Assets Operating in a Circular Economy, Corrosion Management for a Sustainable Future

In C. Taylor & A. N. Sanchez (Eds.), Corrosion Management for a Sustainable Future. NACE Publications.

By: J. Soltis & R. Gupta

Ed(s): C. Taylor & A. Sanchez

Source: NC State University Libraries
Added: July 2, 2023

2022 journal article

Corrosion Performance of Additively Manufactured 316L Stainless Steel Produced By Feedstock Modification

ECS Meeting Abstracts.

By: V. Vukkum n, A. Darwish n, J. Christudasjustus n, S. Storck & R. Gupta n

Source: ORCID
Added: May 21, 2023

2022 journal article

Corrosion behavior of a bulk nanocrystalline Al-Fe alloy

CORROSION SCIENCE, 209.

author keywords: Aluminum alloys; Nanocrystalline alloys; Corrosion; High-energy ball milling; Al -Fe alloy; Microstructure
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: November 7, 2022

2022 journal article

Corrosion behavior of an in situ consolidated nanocrystalline Al-V alloy

NPJ MATERIALS DEGRADATION, 6(1).

By: C. Witharamage n, J. Christudasjustus n, J. Smith n, W. Gao n & R. Gupta n

Sources: Web Of Science, ORCID, NC State University Libraries
Added: February 18, 2022

2022 journal article

Corrosion performance of feedstock modified - Additively manufactured stainless steel

CORROSION SCIENCE, 209.

By: V. Vukkum n, F. Ozdemir n, S. Storck* & R. Gupta n

author keywords: Additive manufacturing; Laser-Powder bed fusion; Corrosion; Stainless steel; Feedstock; Microstructure
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: November 7, 2022

2022 journal article

Corrosion-Resistant Sacrificial Metallic Coatings Produced By Cold-Spray for Al Alloys

ECS Meeting Abstracts.

By: C. Witharamage n, M. Alrizqi n, A. Darwish n, A. Nieto* & R. Gupta n

Source: ORCID
Added: May 21, 2023

2022 journal article

Corrosion-resistant metallic coatings for aluminum alloys by cold spray

Corrosion Science, 209, 110720.

By: C. Witharamage n, M. Alrizqi n, J. Chirstudasjustus n, A. Darwish n, T. Ansell*, A. Nieto*, R. Gupta n

author keywords: Cold spray; Supersaturated solid solution; Supersonic particle deposition; Metallic coating; Sacrificial coating; Aluminum alloys
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries, Crossref
Added: November 7, 2022

2022 article

Effect of Graphene Morphology on the Microstructure, Mechanical and Tribological Behavior of Nickel Matrix Composites

Patil, A., Nartu, M. S. K. K. Y., Ozdemir, F., Banerjee, R., Gupta, R. K., & Borkar, T. (2022, October 10). JOM, Vol. 10.

By: A. Patil*, M. Nartu*, F. Ozdemir n, R. Banerjee*, R. Gupta n & T. Borkar*

UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: October 24, 2022

2022 journal article

Enhanced corrosion resistance of additively manufactured stainless steel by modification of feedstock

NPJ MATERIALS DEGRADATION, 6(1).

By: V. Vukkum n, J. Christudasjustus n, A. Darwish n, S. Storck* & R. Gupta n

Sources: Web Of Science, ORCID, NC State University Libraries
Added: January 21, 2022

2022 article

Influence of vanadium addition on corrosion behavior of high-energy ball milled aluminum alloy 2024

Ozdemir, F., & Gupta, R. K. (2022, September 25). MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, Vol. 9.

By: F. Ozdemir n & R. Gupta n

author keywords: AA2024; aluminum alloys; corrosion; high-energy ball milling; nanocrystalline alloys
Sources: ORCID, Web Of Science, NC State University Libraries
Added: October 3, 2022

2022 article

Need of an Inert Atmosphere for High-Energy Ball Milling of Al Alloys

Ozdemir, F., Christudasjustus, J., Vukkum, V. B., Okuyucu, H., & Gupta, R. K. (2022, September 8). JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 9.

By: F. Ozdemir n, J. Christudasjustus n, V. Vukkum n, H. Okuyucu* & R. Gupta n

author keywords: aluminium; corrosion; high-energy ball milling; milling atmosphere; nanocrystalline alloy; powder metallurgy
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: September 19, 2022

2022 journal article

Passive Film Structure and Corrosion Initiation in Al Alloys with Far-from-Equilibrium Compositions and Microstructures

ECS Meeting Abstracts.

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: May 21, 2023

2022 review

Review on corrosion performance of laser powder-bed fusion printed 316L stainless steel: Effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure

[Review of ]. MATERIALS & DESIGN, 221.

By: V. Vukkum n & R. Gupta n

author keywords: Powder bed fusion; Processing parameters; Stainless steel; Microstructure; Defects; Corrosion
Sources: Web Of Science, NC State University Libraries
Added: August 22, 2022

2022 journal article

Structure and Composition of the Passive Film Studied Using a Combination of X-Ray Photoelectron Spectroscopy, Secondary Ion Mass Spectrometry, and Scanning Transmission Electron Microscopy

ECS Meeting Abstracts.

Source: ORCID
Added: May 21, 2023

2022 journal article

The influence of spark plasma sintering temperatures on the microstructure, hardness, and elastic modulus of the nanocrystalline Al-xV alloys produced by high-energy ball milling

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 122, 68–76.

By: J. Christudasjustus*, C. Witharamage, G. Walunj, T. Borkar & R. Gupta*

author keywords: Spark plasma sintering; Aluminum alloys; Nanocrystalline alloys; High-energy ball milling; Nanoindentation; Hardness; Elastic modulus
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: March 19, 2022

2022 report

cardiGAN: A Generative Adversarial Network Model for Design and Discovery of Multi Principal Element Alloys

(ArXiv Preprint No. 2202.00966).

By: Z. Li, W. Nash, S. Brien, Y. Qiu, R. Gupta* & N. Birbilis

UN Sustainable Development Goal Categories
10. Reduced Inequalities (OpenAlex)
Sources: NC State University Libraries, NC State University Libraries
Added: July 2, 2023

2022 journal article

cardiGAN: A generative adversarial network model for design and discovery of multi principal element alloys

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 125, 81–96.

author keywords: Alloy design; Machine learning; Generative adversarial network; Neural network; Multi-principal element alloy; High entropy alloys
TL;DR: A proof-of-concept is proposed, combining generative adversarial networks (GANs) with discriminative neural networks (NNs) to accelerate the exploration of novel MPEAs, and it was possible to directly generate novel compositions for MPEAs, and to predict their phases. (via Semantic Scholar)
UN Sustainable Development Goal Categories
10. Reduced Inequalities (OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: May 16, 2022

2021 journal article

A low-cost, low-density, and corrosion resistant AlFeMnSi compositionally complex alloy

NPJ MATERIALS DEGRADATION, 5(1).

Sources: Web Of Science, ORCID, NC State University Libraries
Added: April 5, 2021

2021 journal article

Corrosion behavior of age hardening aluminum alloys produced by high-energy ball milling

JOURNAL OF ALLOYS AND COMPOUNDS, 900.

author keywords: High-energy ball milling; Aluminum alloys; Nanocrystalline alloys; Age hardening; Pitting corrosion
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: February 14, 2022

2021 journal article

Effect of V content on corrosion behavior of high-energy ball milled AA5083

CORROSION SCIENCE, 186.

By: L. Esteves*, J. Christudasjustus n, S. O'Brien n, C. Witharamage n, A. Darwish n, G. Walunj*, P. Stack*, T. Borkar*, R. Akans*, R. Gupta n

author keywords: Nanocrystalline alloys; High-energy ball milling; Aluminum-magnesium alloys; Pitting corrosion
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: June 10, 2021

2021 journal article

Enhancement of the mechanical properties of graphene nanoplatelet (GNP) reinforced nickel matrix nanocomposites

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 817.

By: A. Patil*, M. Nartu*, F. Ozdemir n, R. Banerjee*, R. Gupta n & T. Borkar*

Contributors: A. Patil*, M. Kiran Kumar Yadav Nartu, F. Ozdemir n, R. Banerjee*, R. Gupta n & T. Borkar*

author keywords: Metal matrix composites (MMCs); Ball milling; Spark plasma sintering; Nickel matrix nanocomposites; Graphene nanoplatelets
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: June 14, 2021

2021 journal article

Improvement of Wear, Pitting Corrosion Resistance and Repassivation Ability of Mg-Based Alloys Using High Pressure Cold Sprayed (HPCS) Commercially Pure-Titanium Coatings

COATINGS, 11(1).

By: M. Daroonparvar*, A. Kasar*, M. Farooq Khan n, P. L. Menezes*, C. Kay, M. Misra*, R. Gupta n

author keywords: Ti coating; cyclic potentiodynamic polarization (CPP) test; hysteresis loop; wear
Sources: Web Of Science, ORCID, NC State University Libraries
Added: February 8, 2021

2021 journal article

On the dynamic passivity and corrosion resistance of a low cost and low density multi-principal-element alloy produced via commodity metals

ELECTROCHEMISTRY COMMUNICATIONS, 125.

By: S. Choudhary*, . S. O'Brien, Y. Qiu*, S. Thomas*, R. Gupta n & N. Birbilis*

Sources: Web Of Science, NC State University Libraries
Added: May 24, 2021

2021 journal article

Sluggish precipitation strengthening in Al-Li alloy with a high concentration of Mg

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 11, 1806–1815.

By: Z. Liu*, J. Li*, D. Liu*, Y. Ma, Y. Du*, Y. Chen*, X. Zhang*, R. Gupta n, X. Chen*, R. Zhang*

author keywords: Al-Li alloys; High Mg concentration; Microstructure; Precipitation strengthening
Sources: Web Of Science, ORCID, NC State University Libraries
Added: May 17, 2021

2021 journal article

Strengthening effects of multi-walled carbon nanotubes reinforced nickel matrix nanocomposites

JOURNAL OF ALLOYS AND COMPOUNDS, 876.

By: A. Patil*, M. Nartu*, F. Ozdemir n, R. Banerjee*, R. Gupta n & T. Borkar*

Contributors: A. Patil*, M. Nartu*, F. Ozdemir n, R. Banerjee*, R. Gupta n & T. Borkar*

author keywords: Metal matrix composites (MMCs); Ball milling; Spark plasma sintering; Nickel matrix nanocomposites; Carbon nanotubes
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: June 28, 2021

2021 journal article

The Effect of Milling Time and Speed on Solid Solubility, Grain Size, and Hardness of Al-V Alloys

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 30(4), 3144–3158.

By: C. Witharamage n, J. Christudasjustus n & R. Gupta n

author keywords: grain refinement; high-energy ball milling; nanocrystalline aluminum alloys; solid solubility
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: April 12, 2021

2021 chapter

The Effect of Titanium Carbide and Spark Plasma Sintering Processing on Nickel–Titanium Carbide Composites

In T. S. Srivatsan, W. C. Harrigan Jr/, & S. Hunyadi Murph (Eds.), Metal-Matrix Composites: Advances in Analysis, Measurement, and Observations (pp. 65–73).

By: G. Walunj*, A. Bearden*, A. Patil*, T. Larimian*, J. Christudasjustus*, R. Gupta*, T. Borkar*

Contributors: G. Walunj*, A. Bearden*, A. Patil*, T. Larimian*, J. Christudasjustus*, R. Gupta*, T. Borkar*

Ed(s): T. Srivatsan, W. Harrigan & S. Hunyadi Murph

author keywords: Mechanical alloying (MA); Spark-plasma sintering (SPS); Nickel-titanium carbide composites; Microhardness
Sources: NC State University Libraries, NC State University Libraries, ORCID
Added: August 19, 2021

2021 journal article

Tribological Behavior of Carbon-Based Nanomaterial-Reinforced Nickel Metal Matrix Composites

MATERIALS, 14(13).

By: A. Patil*, G. Walunj*, F. Ozdemir n, R. Gupta n & T. Borkar*

Contributors: A. Patil*, G. Walunj*, F. Ozdemir n, R. Gupta n & T. Borkar*

author keywords: metal matrix composites (MMCs); ball milling; spark plasma sintering; nickel metal matrix nanocomposites; carbon nanotubes; graphene nanoplatelets; tribological behavior
TL;DR: Experimental results indicate considerable grain refinement and improvement in the microhardness of these composites after the addition of CNTs/GNPs in the nickel matrix. (via Semantic Scholar)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: July 26, 2021

2020 article

A low-cost, low-density and corrosion resistant compositionally complex alloy: AlFeMnSi

O'Brien, S., Esteves, L., Birbilis, N., & Gupta, R. (2020, January 8). (Vol. 1). Vol. 1.

By: S. O'Brien, L. Esteves, N. Birbilis & R. Gupta*

Source: ORCID
Added: May 21, 2023

2020 journal article

Bulk-nano spark plasma sintered Fe-Si-B-Cu-Nb based magnetic alloys

Intermetallics, 124, 106869.

By: T. Larimian*, V. Chaudhary*, J. Christudasjustus*, R. Ramanujan*, R. Gupta* & T. Borkar*

Contributors: T. Larimian*, V. Chaudhary*, J. Christudasjustus*, R. Ramanujan*, R. Gupta* & T. Borkar*

author keywords: Finemet; FeSiB; FeSiBCu; FeSiBNb; Spark plasma sintering; Mechanical alloying; Soft magnetic materials; Magnetization
Sources: Crossref, NC State University Libraries, ORCID
Added: August 19, 2021

2020 journal article

Corrosion Behavior and Hardness of Binary Mg Alloys Produced via High-Energy Ball-Milling and Subsequent Spark Plasma Sintering

CORROSION, 77(2), 228–241.

By: M. Khan n, T. Larimian*, T. Borkar* & R. Gupta n

author keywords: high-energy ball milling; magnesium alloys; nanocrystalline alloys; nonequilibrium alloying; spark plasma sintering
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: March 22, 2021

2020 journal article

Corrosion behavior of AA5083 produced by high-energy ball milling

JOURNAL OF ALLOYS AND COMPOUNDS, 857.

By: L. Esteves*, C. Witharamage n, J. Christudasjustus n, G. Walunj*, S. O'Brien n, S. Ryu*, T. Borkar*, R. Akans*, R. Gupta n

Contributors: L. Esteves*, C. Witharamage n, J. Christudasjustus n, G. Walunj*, . S.P. O'Brien n, S. Ryu*, T. Borkar*, R. Akans*, R. Gupta n

author keywords: Nanocrystalline alloys; High-energy ball milling; Spark plasma sintering (SPS); Aluminum-magnesium alloys; Pitting corrosion
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: March 1, 2021

2020 journal article

Enhanced corrosion resistance and surface bioactivity of AZ31B Mg alloy by high pressure cold sprayed monolayer Ti and bilayer Ta/Ti coatings in simulated body fluid

Materials Chemistry and Physics, 256, 123627.

TL;DR: Ta/Ti coating presented the most positive potential, highest Rct, and highest│Z│f=0.01Hz values, suggesting that it is the most thermodynamically stable/least to be corroded in Hank's balanced salt solution over time. (via Semantic Scholar)
Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2020 journal article

High temperature oxidation behavior of aluminized Haynes 230

Corrosion Science, 174, 108835.

By: S. Rashidi*, J. Choi*, J. Stevenson*, A. Pandey* & R. Gupta*

Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2020 journal article

Intergranular to Intragranular Pitting Corrosion Transition Mechanism of Sensitized AA5083 at 150 °C

Metals, 10(8), 1082.

Source: ORCID
Added: May 21, 2023

2020 journal article

Mechanical and Tribological Behavior of Mechanically Alloyed Ni-TiC Composites Processed via Spark Plasma Sintering

MATERIALS, 13(22).

By: G. Walunj*, A. Bearden*, A. Patil*, T. Larimian*, J. Christudasjustus n, R. Gupta n, T. Borkar*

Contributors: G. Walunj*, A. Bearden*, A. Patil*, T. Larimian*, J. Christudasjustus n, R. Gupta n, T. Borkar*

author keywords: metal matrix composites (MMCs); mechanical alloying (MA); spark plasma sintering (SPS); nickel-titanium carbide composites; microhardness
TL;DR: All Ni-TiC composites exhibited higher microhardness and compressive strength than pure nickel due to the presence of homogeneously distributed TiC particles within the nickel matrix, matrix grain refinement, and excellent interfacial bonding between nickel and TiC reinforcement. (via Semantic Scholar)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: December 21, 2020

2020 journal article

Modification of surface hardness, wear resistance and corrosion resistance of cold spray Al coated AZ31B Mg alloy using cold spray double layered Ta/Ti coating in 3.5 wt % NaCl solution

Corrosion Science, 176, 109029.

By: M. Daroonparvar*, M. Khan*, Y. Saadeh*, C. Kay, A. Kasar*, P. Kumar*, L. Esteves*, M. Misra* ...

Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2020 journal article

Review—Corrosion-Resistant Metastable Al Alloys: An Overview of Corrosion Mechanisms

Journal of The Electrochemical Society, 167(8), 081504.

By: J. Esquivel* & R. Gupta*

Source: ORCID
Added: May 21, 2023

2020 journal article

Spark plasma sintering of Fe–Si–B–Cu–Nb / Finemet based alloys

Intermetallics, 129, 107035.

By: T. Larimian*, V. Chaudhary*, M. Khan*, R. Ramanujan*, R. Gupta* & T. Borkar*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2020 journal article

Spark plasma sintering of a high-energy ball milled Mg-10 wt% Al alloy

Journal of Magnesium and Alloys, 8(2), 319–328.

By: M. Khan*, A. Patil*, J. Christudasjustus*, T. Borkar* & R. Gupta*

Contributors: M. Khan*, A. Patil*, J. Christudasjustus*, T. Borkar* & R. Gupta*

author keywords: Nanocrystalline alloy; Magnesium; High energy ball milling; Spark plasma sintering; Corrosion
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: August 19, 2021

2020 journal article

Study of Corrosion Behavior and In Vitro Bioactivity of Single NbSi2 and Duplex NbSi2/Nb5Si3 Coatings on Nb Substrates for Biomedical Applications

Protection of Metals and Physical Chemistry of Surfaces, 56(3), 628–637.

TL;DR: Modification of chemical composition and surface morphology of Nb substrate surface can provide suitable nucleation sites for apatite formation and growth in SBF solution, indicated in vitro bioactivity test. (via Semantic Scholar)
Sources: Crossref, NC State University Libraries
Added: July 2, 2023

2020 journal article

Tribological Behavior of In Situ Processed Ni-Ti-C Nanocomposites

Tribology Transactions, 64(1), 53–64.

By: A. Patil*, G. Walunj*, T. Torgerson*, M. Koricherla*, M. Khan*, T. Scharf*, R. Gupta*, T. Borkar*

Source: ORCID
Added: May 21, 2023

2019 journal article

Spark plasma sintering of low modulus titanium-niobium-tantalum-zirconium (TNTZ) alloy for biomedical applications

Materials & Design, 183, 108163.

By: N. Mavros*, T. Larimian*, J. Esqivel*, R. Gupta*, R. Contieri* & T. Borkar*

TL;DR: The main objective is to study the effect of different alloying elements on microstructure, phase transformation and mechanical properties of these newly developed low modulus β-phase titanium alloys and establish new avenues for the future development of biocompatible titanium alloy with optimum microst structure and properties. (via Semantic Scholar)
Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2018 journal article

A Surface Study of the Native Oxide upon a Compositionally Complex Alloy

CORROSION, 74(12), 1312–1317.

Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2018 journal article

A closer look at the role of Zn in the microstructure and corrosion of an Al-Cu-Li alloy

Corrosion Science, 145, 220–231.

By: D. Liu*, J. Li*, Y. Ma, R. Gupta*, N. Birbilis* & R. Zhang*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2018 journal article

Antibacterial activities and corrosion behavior of novel PEO/nanostructured ZrO2 coating on Mg alloy

Transactions of Nonferrous Metals Society of China, 28(8), 1571–1581.

By: M. Daroonparvar*, M. Mat Yajid*, R. Gupta*, N. Mohd Yusof*, H. Bakhsheshi Rad*, H. Ghandvar*, E. Ghasemi*

Sources: Crossref, NC State University Libraries
Added: July 2, 2023

2018 journal article

Correlation of intergranular corrosion behaviour with microstructure in Al-Cu-Li alloy

Corrosion Science, 139, 215–226.

By: J. Huang*, J. Li*, D. Liu*, R. Zhang*, Y. Chen*, X. Zhang*, P. Ma*, R. Gupta*, N. Birbilis*

Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2018 journal article

Corrosion and Mechanical Properties of Al-5 At. Pct Cr Produced by Cryomilling and Subsequent Consolidation at Various Temperatures

Metallurgical and Materials Transactions A, 49(7), 3058–3065.

By: J. Esquivel*, K. Darling*, H. Murdoch* & R. Gupta*

Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2018 journal article

Effect of Aluminizing on the High-Temperature Oxidation Behavior of an Alumina-Forming Austenitic Stainless Steel

JOM, 71(1), 109–115.

By: S. Rashidi*, J. Choi*, J. Stevenson*, A. Pandey & R. Gupta*

Source: ORCID
Added: May 21, 2023

2018 journal article

Effects of Al2O3 diffusion barrier layer (including Y-containing small oxide precipitates) and nanostructured YSZ top coat on the oxidation behavior of HVOF NiCoCrAlTaY/APS YSZ coatings at 1100 °C

Corrosion Science, 144, 13–34.

By: M. Daroonparvar*, M. Yajid*, C. Kay, H. Bakhsheshi-Rad*, R. Gupta*, N. Yusof*, H. Ghandvar*, A. Arshad*, I. Zulkifli*

Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2018 journal article

High hardness and thermal stability of nanocrystalline Mg–Al alloys synthesized by the high-energy ball milling

Materialia, 4, 406–416.

By: M. Khan*, F. Mirza* & R. Gupta*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: May 21, 2023

2018 journal article

Influence of the V content on microstructure and hardness of high-energy ball milled nanocrystalline Al-V alloys

Journal of Alloys and Compounds, 760, 63–70.

By: J. Esquivel* & R. Gupta*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: May 21, 2023

2018 journal article

Investigation of Corrosion Protection Performance of Multiphase PEO (Mg2SiO4, MgO, MgAl2O4) Coatings on Mg Alloy Formed in Aluminate-Silicate- based Mixture Electrolyte

Protection of Metals and Physical Chemistry of Surfaces, 54(3), 425–441.

By: M. Daroonparvar*, M. Yajid*, R. Gupta*, N. Yusof*, H. Bakhsheshi-Rad* & H. Ghandvar*

UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2018 journal article

Thermal stability of nanocrystalline Al-5at.%Ni and Al-5at.%V alloys produced by high-energy ball milling

Journal of Alloys and Compounds, 744, 651–657.

By: J. Esquivel*, M. Wachowiak*, S. O'Brien* & R. Gupta*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: May 21, 2023

2017 journal article

(Invited) High Strength and Corrosion Resistant Light Alloys Via High-Energy Ball Milling

ECS Meeting Abstracts.

By: R. Gupta* & J. Esquivel*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: May 21, 2023

2017 journal article

Aluminum containing Na2CrO4: Inhibitor release on demand

Materials Letters, 205, 194–197.

By: R. Gupta*, F. Mirza*, M. Khan* & J. Esquivel*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2017 book

An Overview of High-energy Ball Milled Nanocrystalline Aluminum Alloys

In SpringerBriefs in Materials.

By: R. Gupta*, B. Murty* & N. Birbilis*

Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2017 journal article

Corrosion Behavior and Hardness of Al–M (M: Mo, Si, Ti, Cr) Alloys

Acta Metallurgica Sinica (English Letters), 30(4), 333–341.

By: J. Esquivel* & R. Gupta*

Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2017 journal article

Excellent corrosion resistance and hardness in Al alloys by extended solid solubility and nanocrystalline structure

Materials Research Letters, 6(1), 79–83.

By: J. Esquivel*, H. Murdoch*, K. Darling* & R. Gupta*

Source: ORCID
Added: May 21, 2023

2016 journal article

An Overview of New Progresses in Understanding Pipeline Corrosion

Corrosion Science and Technology, 15(6), 271–280.

By: M. Tan*, F. Varela*, Y. Huo, R. Gupta*, D. Abreu*, F. Mahdavi*, B. Hinton*, M. Forsyth*

Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2016 journal article

Occurrence of Anodic Current and Corrosion of Steel in Aqueous Media Under Fluctuating Cathodic Protection Potentials

CORROSION, 72(10), 1243–1251.

By: R. Gupta*, M. Tan, J. Esquivel & M. Forsyth

Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2015 journal article

Corrosion Behaviour of Al-4Mg-1Cu (wt%) Microalloyed with Si and Ag

Advanced Engineering Materials.

Contributors: R. Gupta*, C. Li*, J. Xia*, X. Zhou*, G. Sha*, B. Gun*, S. Ringer*, N. Birbilis*

Source: ORCID
Added: May 21, 2023

2015 journal article

Corrosion behaviour and hardness of in situ consolidated nanostructured Al and Al-Cr alloys produced via high-energy ball milling

Corrosion Science, 98, 643–650.

Contributors: R. Gupta*, D. Fabijanic*, R. Zhang* & N. Birbilis*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: May 21, 2023

2015 journal article

Influence of cooling rate on the microstructure and corrosion behavior of Al–Fe alloys

Corrosion Science, 100, 396–403.

Source: ORCID
Added: May 21, 2023

2015 journal article

Simultaneous improvement in the strength and corrosion resistance of Al via high-energy ball milling and Cr alloying

Materials & Design, 84, 270–276.

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: ORCID, Crossref, NC State University Libraries
Added: May 21, 2023

2015 journal article

The Influence of Grain Size and Grain Orientation on Sensitization in AA5083

Corrosion, 72(2), 160–168.

By: R. Zhang, R. Gupta*, C. Davies*, A. Hodge*, M. Tort*, K. Xia*, N. Birbilis*

Sources: NC State University Libraries, NC State University Libraries
Added: July 2, 2023

2014 journal article

Effect of Vacuum System Base Pressure on Corrosion Resistance of Sputtered Al Thin Films

Journal of The Electrochemical Society, 161(4), C195–C200.

By: G. Frankel*, X. Chen*, R. Gupta*, S. Kandasamy* & N. Birbilis*

Sources: Crossref, NC State University Libraries
Added: June 26, 2023

2014 conference paper

Studying the cathodic disbondment of coatings using electrochemical impedance spectroscopy

Annual Conference of the Australasian Corrosion Association 2014: Corrosion and Prevention 2014. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919343962&partnerID=MN8TOARS

By: F. Mahdavi, M. Tan, M. Forsyth, R. Gupta & D. Abreu

Contributors: F. Mahdavi, M. Tan, M. Forsyth, R. Gupta & D. Abreu

Source: ORCID
Added: May 21, 2023

2014 journal article

The effect of chromate on the pitting susceptibility of AA7075-T651 studied using potentiostatic transients

Corrosion Science, 82, 197–207.

By: R. Gupta*, B. Hinton* & N. Birbilis*

Contributors: R. Gupta*, B. Hinton* & N. Birbilis*

Source: ORCID
Added: May 21, 2023

2014 journal article

The influence of nanocrystalline structure and processing route on corrosion of stainless steel: A review

Corrosion Science, 92, 1–15.

By: R. Gupta* & N. Birbilis*

Contributors: R. Gupta* & N. Birbilis*

Source: ORCID
Added: May 21, 2023

2013 conference paper

An overview of methods for simulating and evaluating pipeline corrosion

Annual Conference of the Australasian Corrosion Association 2013: Corrosion and Prevention 2013, 513–521. http://www.scopus.com/inward/record.url?eid=2-s2.0-84914674678&partnerID=MN8TOARS

By: R. Gupta, M. Tan, M. Forsyth & B. Hinton

Contributors: R. Gupta, M. Tan, M. Forsyth & B. Hinton

Source: ORCID
Added: May 21, 2023

2013 journal article

Effect of nanocrystalline structure on the corrosion of a Fe20Cr alloy

International Journal of Electrochemical Science, 8(5), 6791–6806. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878702475&partnerID=MN8TOARS

By: R. Gupta, R. Raman, C. Koch & B. Murty

Contributors: R. Gupta, R. Raman, C. Koch & B. Murty

Source: ORCID
Added: May 21, 2023

2013 journal article

Effect of the degree of crystallinity on the electrochemical behavior of Mg65Cu25Y10 and Mg70Zn 25Ca5 bulk metallic glasses

Corrosion, 69(8), 781–792.

By: X. Zhou*, K. Ralston, K. Laws, J. Cao, R. Gupta*, M. Ferry, N. Birbilis

Contributors: X. Zhou*, K. Ralston, K. Laws, J. Cao, R. Gupta*, M. Ferry, N. Birbilis

Source: ORCID
Added: May 21, 2023

2013 journal article

Electrochemical and corrosion response of commercially pure aluminum alloyed with binary additions of strontium

Journal of the Electrochemical Society, 160(8).

Contributors: N. Sukiman*, H. Shi*, R. Gupta*, R. Buchheit* & N. Birbilis*

Source: ORCID
Added: May 21, 2023

2013 journal article

Electrochemical behaviour of the β-phase intermetallic (Mg2Al3) as a function of pH as relevant to corrosion of aluminium-magnesium alloys

Corrosion Science, 70, 290–293.

By: J. Lyndon*, R. Gupta*, M. Gibson* & N. Birbilis*

Contributors: J. Lyndon*, R. Gupta*, M. Gibson* & N. Birbilis*

Source: ORCID
Added: May 21, 2023

2013 journal article

Influence of Mg content on the sensitization and corrosion of Al-xMg(-Mn) alloys

Corrosion, 69(11), 1081–1087.

By: R. Gupta*, R. Zhang, C. Davies & N. Birbilis

Contributors: R. Gupta*, R. Zhang, C. Davies & N. Birbilis

Source: ORCID
Added: May 21, 2023

2013 journal article

Influence of alloyed Nd content on the corrosion of an Al-5Mg alloy

Corrosion Science, 73, 181–187.

Source: ORCID
Added: May 21, 2023

2013 journal article

Influence of microalloying additions on Al-Mg alloy. Part 1: Corrosion and electrochemical response

Corrosion Engineering Science and Technology, 49(4), 254–262.

Contributors: N. Sukiman*, R. Gupta*, R. Buchheit* & N. Birbilis*

Source: ORCID
Added: May 21, 2023

2013 journal article

Influence of microalloying additions on Al-Mg alloy. Part 2: Phase analysis and sensitization behaviour

Corrosion Engineering Science and Technology, 49(4), 263–268.

UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Source: ORCID
Added: May 21, 2023

2013 journal article

Theoretical study of the influence of microalloying on sensitization of AA5083 and moderation of sensitization of a model Al-Mg-Mn alloy via Sr additions

Corrosion, 70(4), 402–413.

By: R. Gupta*, R. Zhang, C. Davies & N. Birbilis

Contributors: R. Gupta*, R. Zhang, C. Davies & N. Birbilis

Source: ORCID
Added: May 21, 2023

2012 conference paper

Characterisation of the evolution of microstructure and electrochemical properties for 7xxx aluminium alloys

Annual Conference of the Australasian Corrosion Association 2012, 646–651. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876883337&partnerID=MN8TOARS

By: R. Gupta, A. Deschamps & N. Birbilis

Contributors: R. Gupta, A. Deschamps & N. Birbilis

Source: ORCID
Added: May 21, 2023

2012 journal article

Electrochemical behavior and localized corrosion associated with Mg2Si particles in Al and Mg alloys

ECS Electrochemistry Letters, 1(1).

Source: ORCID
Added: May 21, 2023

2012 journal article

Electrochemical characteristics of nano and microcrystalline Fe-Cr alloys

JOURNAL OF MATERIALS SCIENCE, 47(16), 6118–6124.

By: R. Gupta*, R. Raman* & C. Koch n

Contributors: R. Gupta*, R. Singh Raman* & C. Koch n

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: ORCID, Web Of Science
Added: August 6, 2018

2012 conference paper

General aspects of the corrosion of aluminium alloys

Annual Conference of the Australasian Corrosion Association 2012, 696–702. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876835236&partnerID=MN8TOARS

By: N. Sukiman, R. Gupta, N. Birbilis & R. Buchheit

Contributors: N. Sukiman, R. Gupta, N. Birbilis & R. Buchheit

Source: ORCID
Added: May 21, 2023

2012 journal article

Imparting sensitization resistance to an Al-5Mg alloy via neodymium additions

Corrosion, 69(1), 4–8.

By: R. Gupta*, Y. Wang, R. Zhang, N. Sukiman, C. Davies & N. Birbilis

Contributors: R. Gupta*, Y. Wang, R. Zhang, N. Sukiman, C. Davies & N. Birbilis

UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Source: ORCID
Added: May 21, 2023

2012 journal article

Metastable pitting characteristics of aluminium alloys measured using current transients during potentiostatic polarisation

Electrochimica Acta, 66, 245–254.

By: R. Gupta*, N. Sukiman*, M. Cavanaugh*, B. Hinton*, C. Hutchinson* & N. Birbilis*

Contributors: R. Gupta*, N. Sukiman*, M. Cavanaugh*, B. Hinton*, C. Hutchinson* & N. Birbilis*

Source: ORCID
Added: May 21, 2023

2012 chapter

Oxidation Resistance of Nanocrystalline Alloys

In H. Shih (Ed.), Corrosion Resistance.

By: N. Birbilis*, J. Zhang* & R. Gupt*

Ed(s): H. Shih

Sources: Crossref, NC State University Libraries
Added: July 2, 2023

2012 journal article

Quantification of sensitization in AA5083-H131 via imaging ga-embrittled fracture surfaces

Corrosion, 69(4), 396–402.

By: N. Birbilis*, R. Zhang, M. Lim*, R. Gupta*, C. Davies, S. Lynch, R. Kelly*, J. Scully*

Contributors: N. Birbilis*, R. Zhang, M. Lim*, R. Gupta*, C. Davies, S. Lynch, R. Kelly*, J. Scully*

Source: ORCID
Added: May 21, 2023

2012 journal article

Relating the early evolution of microstructure with the electrochemical response and mechanical performance of a Cu-rich and Cu-lean 7xxx aluminum alloy

Journal of the Electrochemical Society, 159(11).

By: R. Gupta*, A. Deschamps*, M. Cavanaugh*, S. Lynch* & N. Birbilis*

Contributors: R. Gupta*, A. Deschamps*, M. Cavanaugh*, S. Lynch* & N. Birbilis*

Source: ORCID
Added: May 21, 2023

2012 journal article

The inhibition of hydrogen embrittlement in SAE 4340 steel in an aqueous environment with the rare earth compound lanthanum 4 hydroxy cinnamate

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43(7), 2251–2259.

By: B. Hinton*, M. Behrouzvaziri*, M. Forsyth*, R. Gupta*, M. Seter* & P. Bushell*

Contributors: B. Hinton*, M. Behrouzvaziri*, M. Forsyth*, R. Gupta*, M. Seter* & P. Bushell*

Source: ORCID
Added: May 21, 2023

2011 conference paper

A comparison of the metastable pitting response of aluminium alloys

18th International Corrosion Congress 2011, 2, 1176–1182. http://www.scopus.com/inward/record.url?eid=2-s2.0-84867260268&partnerID=MN8TOARS

By: R. Gupta, B. Hinton, C. Hutchinson & N. Birbilis

Contributors: R. Gupta, B. Hinton, C. Hutchinson & N. Birbilis

Source: ORCID
Added: May 21, 2023

2011 journal article

Synthesis, characterization and mechanical behaviour of an in situ consolidated nanocrystalline FeCrNi alloy

Journal of Materials Science, 47(3), 1562–1566.

By: R. Gupta*, K. Darling*, R. Singh Raman*, K. Ravi*, C. Koch n, B. Murty*, R. Scattergood n

Contributors: R. Gupta*, K. Darling*, R. Singh Raman*, K. Ravi*, C. Koch n, B. Murty*, R. Scattergood n

Sources: ORCID, Crossref
Added: December 31, 2020

2010 journal article

Fabrication and oxidation resistance of nanocrystalline Fe10Cr alloy

Journal of Materials Science, 45(17), 4884–4888.

By: R. Gupta*, R. Singh Raman* & C. Koch n

Contributors: R. Gupta*, R. Singh Raman* & C. Koch n

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: ORCID, Crossref
Added: February 24, 2020

2010 conference paper

Processing and electrochemical corrosion resistance of a nanocrystalline Fe-20Cr alloy

TMS Annual Meeting, 1, 703–710. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952489452&partnerID=MN8TOARS

By: R. Gupta, R. Raman & C. Koch

Contributors: R. Gupta, R. Raman & C. Koch

Source: ORCID
Added: May 21, 2023

2010 book

Processing and excellent oxidation resistance of nanocrystalline Fe-Cr alloys

In Materials Science Forum (Vol. 654-656, pp. 1122–1125).

By: R. Gupta*, B. Mahesh*, R. Raman* & C. Koch n

Contributors: R. Gupta*, B. Mahesh*, R. Raman* & C. Koch n

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: May 21, 2023

2010 conference paper

Processing and oxidation resistance of nanocrystalline Fe-10Cr alloy

TMS Annual Meeting, 2, 781–786. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952624807&partnerID=MN8TOARS

By: R. Gupta, R. Raman & C. Koch

Contributors: R. Gupta, R. Raman & C. Koch

Source: ORCID
Added: May 21, 2023

2010 journal article

Resistance of nanocrystalline vis-a-vis microcrystalline Fe-Cr alloys to environmental degradation and challenges to their synthesis

PHILOSOPHICAL MAGAZINE, 90(23), 3233–3260.

By: R. Raman*, R. Gupta* & C. Koch n

Contributors: R. Raman*, R. Gupta* & C. Koch n

author keywords: nanocrystalline Fe-Cr alloys; ball-milling; grain growth; oxide film; secondary ion mass spectrometry (SIMS); oxidation resistance
UN Sustainable Development Goal Categories
15. Life on Land (OpenAlex)
Sources: ORCID, Web Of Science
Added: August 6, 2018

2008 conference paper

Grain growth behaviour and consolddation of ball milled nanocrystalline iron-chromium alloys

TMS Annual Meeting, 1, 151–157. http://www.scopus.com/inward/record.url?eid=2-s2.0-53949111826&partnerID=MN8TOARS

By: R. Gupta, R. Raman & C. Koch

Contributors: R. Gupta, R. Raman & C. Koch

Source: ORCID
Added: May 21, 2023

2008 journal article

Grain growth behaviour and consolidation of ball-milled nanocrystalline Fe-10Cr alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 494(1-2), 253–256.

By: R. Gupta*, R. Raman* & C. Koch n

Contributors: R. Gupta*, R. Singh Raman* & C. Koch n

author keywords: Nanocrystalline Fe-Cr alloys; Ball milling; Grain growth
Sources: ORCID, Web Of Science
Added: August 6, 2018

2008 conference paper

Low temperature oxidation of nanocystalline vis-à-vis microcrystalline Fe-Cr alloys

17th International Corrosion Congress 2008: Corrosion Control in the Service of Society, 5, 3262–3269. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865012025&partnerID=MN8TOARS

By: R. Singh Raman, R. Gupta & C. Koch

Contributors: R. Singh Raman, R. Gupta & C. Koch

Source: ORCID
Added: May 21, 2023

2008 journal article

Oxidation resistance of nanocrystalline vis-à-vis microcrystalline Fe-Cr alloys

Corrosion Science, 51(2), 316–321.

By: R. Raman* & R. Gupta*

Contributors: R. Raman* & R. Gupta*

Source: ORCID
Added: May 21, 2023

2008 conference paper

Role of micro-/nanocrystalline structure in oxidation of FE-CR alloys

48th Annual Conference of the Australasian Corrosion Association 2008: Corrosion and Prevention 2008, 603–609. http://www.scopus.com/inward/record.url?eid=2-s2.0-84867738362&partnerID=MN8TOARS

By: R. Singh Raman Rajeev, K. Gupta, A. Atanacio, K. Prince & C. Koch

Contributors: R. Singh Raman Rajeev, K. Gupta, A. Atanacio, K. Prince & C. Koch

Source: ORCID
Added: May 21, 2023

Employment

Updated: August 14th, 2020 09:09

2020 - present

North Carolina State University Raleigh, NC, US
Associate Professor Materials Science and Engineering

2014 - 2020

The University of Akron Akron, Ohio, US
Assistant Professor

2013 - 2014

Deakin University Geelong Geelong, VIC, AU
Research Academic Institute for Frontier Materials

Education

Updated: November 20th, 2014 15:45

Monash University Clayton, VIC, AU
PhD Mechanical and Aerospace Engineering

Indian Institute of Technology Kanpur Kanpur, Uttar Pradesh, IN
B.Tech. Materials and Metallurgical Engineering

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.