Ronald Scattergood

Roy, D., Chakraborty, S., Gupta, A. K., BasuMallick, A., Scattergood, R. O., & Koch, C. C. (2021). Synergistic effect of Nb and Zr additions on the structure-property relationships of nanocrystalline Cu processed by mechanical alloying and hot pressing. JOURNAL OF ALLOYS AND COMPOUNDS, 854. https://doi.org/10.1016/j.jallcom.2020.157174

Wang, Y., Huang, C., Li, Y., Guo, F., He, Q., Wang, M., … Zhu, Y. (2020). Dense dispersed shear bands in gradient-structured Ni. INTERNATIONAL JOURNAL OF PLASTICITY, 124, 186–198. https://doi.org/10.1016/j.ijplas.2019.08.012

Wang, Y. F., Wang, M. S., Fang, X. T., Guo, F. J., Liu, H. Q., Scattergood, R. O., … Zhu, Y. T. (2019). Extra strengthening in a coarse/ultrafine grained laminate: Role of gradient interfaces. INTERNATIONAL JOURNAL OF PLASTICITY, 123, 196–207. https://doi.org/10.1016/j.ijplas.2019.07.019

Abaza, M. A., Al-Sulaiti, L., Scattergood, R. O., & Youssef, K. M. (2019). Influence of 1%Nb Solute Addition on the Thermal Stability of In Situ Consolidated Nanocrystalline Cu. ADVANCED ENGINEERING MATERIALS, 21(4). https://doi.org/10.1002/adem.201800859

Youssef, K. M., Abaza, M. A., Scattergood, R. O., & Koch, C. C. (2018). High strength, ductility, and electrical conductivity of in-situ consolidated nanocrystalline Cu-1%Nb. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 711, 350–355. https://doi.org/10.1016/j.msea.2017.11.060

Roodposhti, P. S., Saber, M., Koch, C., Scattergood, R., & Shahbazmohamadi, S. (2017). Effect of oxygen content on thermal stability of grain size for nanocrystalline Fe10Cr and Fe14Cr4Hf alloy powders. JOURNAL OF ALLOYS AND COMPOUNDS, 720, 510–520. https://doi.org/10.1016/j.jallcom.2017.05.261

Xu, W., Zhang, Y., Cheng, G., Mathaudhu, S. N., Scattergood, R. O., Koch, C. C., … Zhu, Y. (2017). On the origin and behavior of irradiation-induced c-component dislocation loops in magnesium. ACTA MATERIALIA, 131, 457–466. https://doi.org/10.1016/j.actamat.2017.04.015

Sikdar, K., Chakravarty, S., Roy, D., Scattergood, R. O., & Koch, C. C. (2017). Synthesis and characterization of an in situ consolidated nanocrystalline Cu88Al11.5Y0.5 alloy. Journal of Alloys and Compounds, 717, 219–225. https://doi.org/10.1016/J.JALLCOM.2017.05.092

Xu, W., Li, L., Valdez, J. A., Saber, M., Zhu, Y., Koch, C. C., & Scattergood, R. O. (2016). Effect of nano-oxide particle size on radiation resistance of iron-chromium alloys. JOURNAL OF NUCLEAR MATERIALS, 469, 72–81. https://doi.org/10.1016/j.jnucmat.2015.11.044

Shahbeigi Roodposhti, P., Sarkar, A., Murty, K. L., & Scattergood, R. O. (2016). Effects of Microstructure and Processing Methods on Creep Behavior of AZ91 Magnesium Alloy. Journal of Materials Engineering and Performance, 25(9), 3697–3709. https://doi.org/10.1007/S11665-016-2222-1

Roodposhti, P. S., Sarkar, A., Murty, K. L., Brody, H., & Scattergood, R. (2016). Grain boundary sliding mechanism during high temperature deformation of AZ31 Magnesium alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 669, 171–177. https://doi.org/10.1016/j.msea.2016.05.076

Roodposhti, P. S., Sarkar, A., Murty, K. L., & Scattergood, R. O. (2015). Dislocation Density Evolution During Creep of AZ31 Mg Alloy: A Study by X-ray Diffraction Line Profile Analysis. Metallography, Microstructure, and Analysis, 4(5), 337–343. https://doi.org/10.1007/S13632-015-0220-6

Li, L., Xu, W., Saber, M., Zhu, Y., Koch, C. C., & Scattergood, R. O. (2015). Influence of scandium addition on the high-temperature grain size stabilization of oxide-dispersion-strengthened (ODS) ferritic alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 636, 565–571. https://doi.org/10.1016/j.msea.2015.03.117

Li, L., Xu, W., Saber, M., Zhu, Y., Koch, C. C., & Scattergood, R. O. (2015). Long-term stability of 14YT-4Sc alloy at high temperature. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 647, 222–228. https://doi.org/10.1016/j.msea.2015.09.012

Xu, W., Li, L., Saber, M., Koch, C. C., Zhu, Y., & Scattergood, R. O. (2015). Microstructures and Stabilization Mechanisms of Nanocrystalline Iron-Chromium Alloys with Hafnium Addition. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A(9), 4394–4404. https://doi.org/10.1007/s11661-015-2985-2

Mula, S., Setman, D., Youssef, K., Scattergood, R. O., & Koch, C. C. (2015). Structural evolution of Cu(1−X)YX alloys prepared by mechanical alloying: Their thermal stability and mechanical properties. Journal of Alloys and Compounds, 627, 108–116. https://doi.org/10.1016/j.jallcom.2014.12.114

Zaddach, A. J., Scattergood, R. O., & Koch, C. C. (2015). Tensile properties of low-stacking fault energy high-entropy alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 636, 373–378. https://doi.org/10.1016/j.msea.2015.03.109

Saber, M., Koch, C. C., & Scattergood, R. O. (2015). Thermodynamic Grain Size Stabilization Models: An Overview. MATERIALS RESEARCH LETTERS, 3(2), 65–75. https://doi.org/10.1080/21663831.2014.997894

Roy, D., Mahesh, B. V., Atwater, M. A., Chan, T. E., Scattergood, R. O., & Koch, C. C. (2014). Grain size stability and hardness in nanocrystalline Cu-Al-Zr and Cu-Al-Y alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 598, 217–223. https://doi.org/10.1016/j.msea.2013.11.075

Li, L., Saber, M., Xu, W., Zhu, Y., Koch, C. C., & Scattergood, R. O. (2014). High-temperature grain size stabilization of nanocrystalline Fe-Cr alloys with Hf additions. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 613, 289–295. https://doi.org/10.1016/j.msea.2014.06.099

Kotan, H., Darling, K. A., Scattergood, R. O., & Koch, C. C. (2014). Influence of Zr and nano-Y2O3 additions on thermal stability and improved hardness in mechanically alloyed Fe base ferritic alloys. JOURNAL OF ALLOYS AND COMPOUNDS, 615, 1013–1018. https://doi.org/10.1016/j.jallcom.2014.07.054

Varam, S., Rajulapati, K. V., Rao, K. B. S., Scattergood, R. O., Murty, K. L., & Koch, C. C. (2014). Loading Rate-Dependent Mechanical Properties of Bulk Two-Phase Nanocrystalline Al-Pb Alloys Studied by Nanoindentation. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A(11), 5249–5258. https://doi.org/10.1007/s11661-014-2425-8

Khoshkhoo, M. S., Scudino, S., Bednarcik, J., Kauffmann, A., Bahmanpour, H., Freudenberger, J., … Eckert, J. (2014). Mechanism of nanostructure formation in ball-milled Cu and Cu–3wt%Zn studied by X-ray diffraction line profile analysis. Journal of Alloys and Compounds, 588, 138–143. https://doi.org/10.1016/j.jallcom.2013.10.252

Xu, W. Z., Li, L. L., Saber, M., Koch, C. C., Zhu, Y. T., & Scattergood, R. O. (2014). Nano ZrO2 particles in nanocrystalline Fe-14Cr-1.5Zr alloy powders. JOURNAL OF NUCLEAR MATERIALS, 452(1-3), 434–439. https://doi.org/10.1016/j.jnucmat.2014.05.067

Saber, M., Xu, W., Li, L., Zhu, Y., Koch, C. C., & Scattergood, R. O. (2014). Size effect of primary Y2O3 additions on the characteristics of the nanostructured ferritic ODS alloys: Comparing as-milled and as-milled/annealed alloys using S/TEM. JOURNAL OF NUCLEAR MATERIALS, 452(1-3), 223–229. https://doi.org/10.1016/j.jnucmat.2014.05.014

Saber, M., Kotan, H., Koch, C. C., & Scattergood, R. O. (2013). A predictive model for thermodynamic stability of grain size in nanocrystalline ternary alloys. JOURNAL OF APPLIED PHYSICS, 114(10). https://doi.org/10.1063/1.4821040

Kotan, H., Darling, K. A., Saber, M., Scattergood, R. O., & Koch, C. C. (2013). An in situ experimental study of grain growth in a nanocrystalline Fe91Ni8Zr1 alloy. JOURNAL OF MATERIALS SCIENCE, 48(5), 2251–2257. https://doi.org/10.1007/s10853-012-7002-1

Kotan, H., Darling, K. A., Saber, M., Koch, C. C., & Scattergood, R. O. (2013). Effect of zirconium on grain growth and mechanical properties of a ball-milled nanocrystalline FeNi alloy. Journal of Alloys and Compounds, 551, 621–629. https://doi.org/10.1016/j.jallcom.2012.10.179

Chan, R. N., Stoner, B. R., Thompson, J. Y., Scattergood, R. O., & Piascik, J. R. (2013). Fracture toughness improvements of dental ceramic through use of yttria-stabilized zirconia (YSZ) thin-film coatings. DENTAL MATERIALS, 29(8), 881–887. https://doi.org/10.1016/j.dental.2013.05.003

Koch, C. C., Scattergood, R. O., Saber, M., & Kotan, H. (2013). High temperature stabilization of nanocrystalline grain size: Thermodynamic versus kinetic strategies. JOURNAL OF MATERIALS RESEARCH, 28(13), 1785–1791. https://doi.org/10.1557/jmr.2012.429

Zdanowicz, E., Dow, T. A., Scattergood, R. O., & Youssef, K. (2013). Nanostructure fabrication on germanium and silicon by nanocoining imprint technique. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 37(4), 871–879. https://doi.org/10.1016/j.precisioneng.2013.05.004

Setman, D., Kerber, M., Bahmanpour, H., Horky, J., Scattergood, R. O., Koch, C. C., & Zehetbauer, M. J. (2013). Nature and density of lattice defects in ball milled nanostructured copper. MECHANICS OF MATERIALS, 67, 59–64. https://doi.org/10.1016/j.mechmat.2013.07.007

Mahesh, B. V., Singh Raman, R. K., Scattergood, R. O., & Koch, C. C. (2013). RETRACTED: Fe–Cr–Ni–Zr alloys with bi-modal grain size distribution: Synthesis, mechanical properties and oxidation resistance. Materials Science and Engineering: A, 574, 235–242. https://doi.org/10.1016/J.MSEA.2013.02.049

Roy, D., Atwater, M. A., Youssef, K., Ledford, J. C., Scattergood, R. O., & Koch, C. C. (2013). Studies on thermal stability, mechanical and electrical properties of nano crystalline Cu99.5Zr0.5 alloy. JOURNAL OF ALLOYS AND COMPOUNDS, 558, 44–49. https://doi.org/10.1016/j.jallcom.2012.11.004

Atwater, M. A., Scattergood, R. O., & Koch, C. C. (2013). The stabilization of nanocrystalline copper by zirconium. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 559, 250–256. https://doi.org/10.1016/j.msea.2012.08.092

Tao, J. M., Zhu, X. K., Scattergood, R. O., & Koch, C. C. (2013). The thermal stability of high-energy ball-milled nanostructured Cu. Materials & Design, 50, 22–26. https://doi.org/10.1016/J.MATDES.2013.02.083

Atwater, M. A., Bahmanpour, H., Scattergood, R. O., & Koch, C. C. (2013). The thermal stability of nanocrystalline cartridge brass and the effect of zirconium additions. JOURNAL OF MATERIALS SCIENCE, 48(1), 220–226. https://doi.org/10.1007/s10853-012-6731-5

Atwater, M. A., Mula, S., Scattergood, R. O., & Koch, C. C. (2013, December). Thermal Stability of Nanocrystalline Copper Alloyed with Antimony. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 44A, pp. 5611–5616. https://doi.org/10.1007/s11661-013-1891-8

Kotan, H., Darling, K. A., Saber, M., Scattergood, R. O., & Koch, C. C. (2013). Thermal stability and mechanical properties of nanocrystalline Fe-Ni-Zr alloys prepared by mechanical alloying. JOURNAL OF MATERIALS SCIENCE, 48(24), 8402–8411. https://doi.org/10.1007/s10853-013-7652-7

Darling, K. A., Kecskes, L. J., Atwater, M., Semones, J., Scattergood, R. O., & Koch, C. C. (2013). Thermal stability of nanocrystalline nickel with yttrium additions. JOURNAL OF MATERIALS RESEARCH, 28(13), 1813–1819. https://doi.org/10.1557/jmr.2013.9

Lane, B. M., Dow, T. A., & Scattergood, R. (2013). Thermo-chemical wear model and worn tool shapes for single-crystal diamond tools cutting steel. WEAR, 300(1-2), 216–224. https://doi.org/10.1016/j.wear.2013.02.012

Saber, M., Kotan, H., Koch, C. C., & Scattergood, R. O. (2013). Thermodynamic stabilization of nanocrystalline binary alloys. JOURNAL OF APPLIED PHYSICS, 113(6). https://doi.org/10.1063/1.4791704

Bahmanpour, H., Youssef, K. M., Horky, J., Setman, D., Atwater, M. A., Zehetbauer, M. J., … Koch, C. C. (2012). Deformation twins and related softening behavior in nanocrystalline Cu-30% Zn alloy. ACTA MATERIALIA, 60(8), 3340–3349. https://doi.org/10.1016/j.actamat.2012.02.036

Kotan, H., Saber, M., Koch, C. C., & Scattergood, R. O. (2012). Effect of annealing on microstructure, grain growth, and hardness of nanocrystalline Fe–Ni alloys prepared by mechanical alloying. Materials Science and Engineering: A, 552, 310–315. https://doi.org/10.1016/j.msea.2012.05.045

Roy, D., Mitra, R., Ojo, O. A., Singh, S. S., Kolesnikov, D., Lojkowski, W., … Manna, I. (2012). Evaluation of mechanical properties of partially amorphous and nanocrystalline Al50Ti40Si10 composites prepared by mechanical alloying and hot isostatic pressing. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 555, 21–27. https://doi.org/10.1016/j.msea.2012.06.028

Zdanowicz, E., Dow, T. A., & Scattergood, R. O. (2012). Rapid fabrication of nanostructured surfaces using nanocoining. NANOTECHNOLOGY, 23(41). https://doi.org/10.1088/0957-4484/23/41/415303

Gupta, R. K., Darling, K. S., Singh Raman, R. K., Ravi, K. R., Koch, C. C., Murty, B. S., & Scattergood, R. O. (2012). Synthesis, characterization and mechanical behaviour of an in situ consolidated nanocrystalline FeCrNi alloy. Journal of Materials Science, 47(3), 1562–1566. https://doi.org/10.1007/S10853-011-5986-6

Atwater, M. A., Roy, D., Darling, K. A., Butler, B. G., Scattergood, R. O., & Koch, C. C. (2012). The thermal stability of nanocrystalline copper cryogenically milled with tungsten. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 558, 226–233. https://doi.org/10.1016/j.msea.2012.07.117

Saber, M., Kotan, H., Koch, C. C., & Scattergood, R. O. (2012). Thermal stability of nanocrystalline Fe-Cr alloys with Zr additions. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 556, 664–670. https://doi.org/10.1016/j.msea.2012.07.045

Mula, S., Bahmanpour, H., Mal, S., Kang, P. C., Atwater, M., Jian, W., … Koch, C. C. (2012). Thermodynamic feasibility of solid solubility extension of Nb in Cu and their thermal stability. Materials Science and Engineering: A, 539, 330–336. https://doi.org/10.1016/j.msea.2012.01.104

Bahmanpour, H., Kauffmann, A., Khoshkhoo, M. S., Youssef, K. M., Mula, S., Freudenberger, J., … Koch, C. C. (2011). Effect of stacking fault energy on deformation behavior of cryo-rolled copper and copper alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 529, 230–236. https://doi.org/10.1016/j.msea.2011.09.022

Youssef, K., Sakaliyska, M., Bahmanpour, H., Scattergood, R., & Koch, C. (2011). Effect of stacking fault energy on mechanical behavior of bulk nanocrystalline Cu and Cu alloys. ACTA MATERIALIA, 59(14), 5758–5764. https://doi.org/10.1016/j.actamat.2011.05.052

Purohit, Y., Sun, L., Shenderova, O., Scattergood, R. O., & Brenner, D. W. (2011). First-principles-based mesoscale modeling of the solute-induced stabilization of < 1 0 0 > tilt grain boundaries in an Al-Pb alloy. ACTA MATERIALIA, 59(18), 7022–7028. https://doi.org/10.1016/j.actamat.2011.07.056

Bahmanpour, H., Youssef, K. M., Scattergood, R. O., & Koch, C. C. (2011). Mechanical behavior of bulk nanocrystalline copper alloys produced by high energy ball milling. JOURNAL OF MATERIALS SCIENCE, 46(19), 6316–6322. https://doi.org/10.1007/s10853-011-5312-3

VanLeeuwen, B. K., Darling, K. A., Koch, C. C., & Scattergood, R. O. (2011). Novel technique for the synthesis of ultra-fine porosity metal foam via the inclusion of condensed argon through cryogenic mechanical alloying. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 528(4-5), 2192–2195. https://doi.org/10.1016/j.msea.2010.11.057

Kauffmann, A., Freudenberger, J., Geissler, D., Yin, S., Schillinger, W., Sarma, V. S., … Schultz, L. (2011). Severe deformation twinning in pure copper by cryogenic wire drawing. Acta Materialia, 59(20), 7816–7823. https://doi.org/10.1016/j.actamat.2011.08.042

Darling, K. A., VanLeeuwen, B. K., Semones, J. E., Koch, C. C., Scattergood, R. O., Kecskes, L. J., & Mathaudhu, S. N. (2011). Stabilized nanocrystalline iron-based alloys: Guiding efforts in alloy selection. Materials Science and Engineering: A, 528(13-14), 4365–4371. https://doi.org/10.1016/j.msea.2011.02.080

Purohit, Y., Sun, L., Irving, D. L., Scattergood, R. O., & Brenner, D. W. (2010). Computational study of the impurity induced reduction of grain boundary energies in nano- and bi-crystalline Al-Pb alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(7-8), 1769–1775. https://doi.org/10.1016/j.msea.2009.11.034

Gobien, J. M., Murty, K. L., Scattergood, R. O., Goodwin, F., & Koch, C. C. (2010). Creep behavior of ultra-fine grained Zn-4.5Al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(27-28), 7382–7386. https://doi.org/10.1016/j.msea.2010.08.020

Gollapudi, S., Rajulapati, K. V., Charit, I., Koch, C. C., Scattergood, R. O., & Murty, K. L. (2010). Creep in nanocrystalline materials: Role of stress assisted grain growth. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(21-22), 5773–5781. https://doi.org/10.1016/j.msea.2010.05.048

Shi, M., Lane, B., Mooney, C. B., Dow, T. A., & Scattergood, R. O. (2010). Diamond tool wear measurement by electron-beam-induced deposition. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 34(4), 718–721. https://doi.org/10.1016/j.precisioneng.2010.03.009

Lane, B. M., Shi, M., Dow, T. A., & Scattergood, R. (2010). Diamond tool wear when machining Al6061 and 1215 steel. Wear, 268(11-12), 1434–1441. https://doi.org/10.1016/j.wear.2010.02.019

Osetsky, Y., Scattergood, R., Serra, A., & Stoller, R. (2010). Elasticity to Atomistics: Predictive Modeling of Defect Behavior Symposium within MMM4 (October 2008) Dedicated to David Bacon PREFACE. PHILOSOPHICAL MAGAZINE, Vol. 90, pp. 803–804. https://doi.org/10.1080/14786430903236040

Koch, C. C., Scattergood, R. O., Youssef, K. M., Chan, E., & Zhu, Y. T. (2010, September). Nanostructured materials by mechanical alloying: new results on property enhancement. JOURNAL OF MATERIALS SCIENCE, Vol. 45, pp. 4725–4732. https://doi.org/10.1007/s10853-010-4252-7

Darling, K. A., VanLeeuwen, B. K., Koch, C. C., & Scattergood, R. O. (2010). Thermal stability of nanocrystalline Fe-Zr alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(15), 3572–3580. https://doi.org/10.1016/j.msea.2010.02.043

VanLeeuwen, B. K., Darling, K. A., Koch, C. C., Scattergood, R. O., & Butler, B. G. (2010). Thermal stability of nanocrystalline Pd81Zr19. ACTA MATERIALIA, 58(12), 4292–4297. https://doi.org/10.1016/j.actamat.2010.04.023

Gollapudi, S., Rajulapati, K. V., Charit, I., Youssef, K. M., Koch, C. C., Scattergood, R. O., & Murty, K. L. (2010). Understanding creep in nanocrystalline materials. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 63(2-3), 373–378. https://doi.org/10.1007/s12666-010-0050-9

Gobien, J. M., Scattergood, R. O., Goodwin, F. E., & Koch, C. C. (2009). Mechanical behavior of bulk ultra-fine-grained Zn-Al die-casting alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 518(1-2), 84–88. https://doi.org/10.1016/j.msea.2009.04.023

Zhang, D. L., Koch, C. C., & Scattergood, R. O. (2009). The role of new particle surfaces in synthesizing bulk nanostructured metallic materials by powder metallurgy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 516(1-2), 270–275. https://doi.org/10.1016/j.msea.2009.03.024

Purohit, Y., Jang, S., Irving, D. L., Padgett, C. W., Scattergood, R. O., & Brenner, D. W. (2008, October 15). Atomistic modeling of the segregation of lead impurities to a grain boundary in an aluminum bicrystalline solid. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 493, pp. 97–100. https://doi.org/10.1016/j.msea.2007.05.128

Darling, K. A., Chan, R. N., Wong, P. Z., Semones, J. E., Scattergood, R. O., & Koch, C. C. (2008). Grain-size stabilization in nanocrystalline FeZr alloys. SCRIPTA MATERIALIA, 59(5), 530–533. https://doi.org/10.1016/j.scriptamat.2008.04.045

Jang, S., Purohit, Y., Irving, D. L., Padgett, C., Brenner, D., & Scattergood, R. O. (2008). Influence of Pb segregation on the deformation of nanocrystalline Al: Insights from molecular simulations. ACTA MATERIALIA, 56(17), 4750–4761. https://doi.org/10.1016/j.actamat.2008.05.024

Rajulapati, K. V., Scattergood, R. O., Murty, K. L., Horita, Z., Langdon, T. G., & Koch, C. C. (2008). Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 39A(10), 2528–2534. https://doi.org/10.1007/s11661-008-9593-3

Jang, S., Purohit, Y., Irving, D., Padgett, C., Brenner, D., & Scattergood, R. O. (2008, October 15). Molecular dynamics simulations of deformation in nanocrystalline Al-Pb alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 493, pp. 53–57. https://doi.org/10.1016/j.msea.2007.05.130

Purohit, Y., Irving, D. L., Scattergood, R. O., & Brenner, D. W. (2008). Prediction of Energies of <100> Tilt Boundaries in Al-Pb Alloy. Materials Research Society Symposium Proceedings, 1056E, 1056–HH01-105610.

Darling, K. A., Reynolds, C. L., Jr., Leonard, D. N., Duscher, G., Scattergood, R. O., & Koch, C. C. (2008). Self-assembled three-dimensional Cu-Ge nanoweb composite. NANOTECHNOLOGY, 19(13). https://doi.org/10.1088/0957-4484/19/13/135603

Koch, C. C., Scattergood, R. O., Darling, K. A., & Semones, J. E. (2008, December). Stabilization of nanocrystalline grain sizes by solute additions. JOURNAL OF MATERIALS SCIENCE, Vol. 43, pp. 7264–7272. https://doi.org/10.1007/s10853-008-2870-0

Scattergood, R. O., Koch, C. C., Murty, K. L., & Brenner, D. (2008, October 15). Strengthening mechanisms in nanocrystalline alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 493, pp. 3–11. https://doi.org/10.1016/j.msea.2007.04.132

Darling, K. A., Guduru, R. K., Reynolds, C. L., Jr, Bhosle, V. M., Chan, R. N., Scattergood, R. O., … Aboelfotoh, M. O. (2008). Thermal stability, mechanical and electrical properties of nanocrystalline Cu3Ge. Intermetallics, 16(3), 378–383. https://doi.org/10.1016/j.intermet.2007.11.005

Guduru, R. K., Wong, P. Z., Darling, K. A., Koch, C. C., Murty, K. L., & Scattergood, R. O. (2007). Determination of Activation Volume in Nanocrystalline Cu Using the Shear Punch Test. Advanced Engineering Materials, 9(10), 855–859. https://doi.org/10.1002/adem.200700181

Guduru, R. K., Murty, K. L., Youssef, K. M., Scattergood, R. O., & Koch, C. C. (2007). Mechanical behavior of nanocrystalline copper. Materials Science and Engineering: A, 463(1-2), 14–21. https://doi.org/10.1016/j.msea.2006.07.165

Guduru, R. K., Darling, K. A., Scattergood, R. O., Koch, C. C., & Murty, K. L. (2007). Mechanical properties of electrodeposited nanocrystalline copper using tensile and shear punch tests. JOURNAL OF MATERIALS SCIENCE, 42(14), 5581–5588. https://doi.org/10.1007/s10853-006-1095-3

Koch, C. C., Scattergood, R. O., & Murty, K. L. (2007). The mechanical behavior of multiphase nanocrystalline materials. JOM, 59(3), 66–70. https://doi.org/10.1007/s11837-007-0042-3

Guduru, R. K., Nagasekhar, A. V., Scattergood, R. O., Koch, C. C., & Murty, K. L. (2007). Thickness and clearance effects in shear punch testing. ADVANCED ENGINEERING MATERIALS, 9(3), 157–160. https://doi.org/10.1002/adem.200600255

Rajulapati, K. V., Scattergood, R. O., Murty, K. L., Duscher, G., & Koch, C. C. (2006). Effect of Pb on the mechanical properties of nanocrystalline Al. SCRIPTA MATERIALIA, 55(2), 155–158. https://doi.org/10.1016/j.scriptamat.2006.03.051

Guduru, R. K., Nagasekhar, A. V., Scattergood, R. O., Koch, C. C., & Murty, K. L. (2006). Finite element analysis of a shear punch test. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 37A(5), 1477–1483. https://doi.org/10.1007/s11661-006-0092-0

Guduru, R. K., Scattergood, R. O., Koch, C. C., Murty, K. L., Guruswamy, S., & McCarter, M. K. (2006). Mechanical properties of nanocrystalline Fe-Pb and Fe-Al2O3. SCRIPTA MATERIALIA, 54(11), 1879–1883. https://doi.org/10.1016/j.scriptamat.2006.02.014

Youssef, K. M., Scattergood, R. O., Murty, K. L., & Koch, C. C. (2006). Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility. SCRIPTA MATERIALIA, 54(2), 251–256. https://doi.org/10.1016/j.scriptamat.2005.09.028

Guduru, R. K., Darling, K. A., Scattergood, R. O., Koch, C. C., Murty, K. L., Bakkal, M., & Shih, A. J. (2006). Shear punch tests for a bulk metallic glass. INTERMETALLICS, 14(12), 1411–1416. https://doi.org/10.1016/j.intermet.2006.01.052

Qu, J., Shih, A. J., Scattergood, R. O., & Luo, J. (2005). Abrasive micro-blasting to improve surface integrity of electrical discharge machined WC-Co composite. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 166(3), 440–448. https://doi.org/10.1016/j.jmatprotec.2004.09.075

Trichy, G. R., Scattergood, R. O., Koch, C. C., & Murty, K. L. (2005). Ball indentation tests for a Zr-based bulk metallic glass. SCRIPTA MATERIALIA, 53(12), 1461–1465. https://doi.org/10.1016/j.scriptamat.2005.08.010

Koch, C. C., Youssef, K. M., Scattergood, R. O., & Murty, K. L. (2005). Breakthroughs in Optimization of Mechanical Properties of Nanostructured Metals and Alloys. Advanced Engineering Materials, 7(9), 787–794. https://doi.org/10.1002/adem.200500094

Koch, C. C., Youssef, K. M., Scattergood, R. O., & Murty, K. L. (2005). Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys. Advanced Engineering Materials, 7(9), 787–794. https://doi.org/10.1002/adern.200500094

Zhang, D. L., Raynova, S., Koch, C. C., Scattergood, R. O., & Youssef, K. M. (2005, November 25). Consolidation of a Cu-2.5 vol.% Al2O3 powder using high energy mechanical milling. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 410, pp. 375–380. https://doi.org/10.1016/j.msea.2005.08.109

Murty, K. L., Kishore, R., Yan, J., Scattergood, R. O., & Helsel, A. W. (2005). Effect of annealing temperature on texture and creep anisotropy in Ti3Al2.5V alloy. In Textures of materials: ICOTOM 14: 
Proceedings of the 14th International Conference on Textures of Materials, held in Leuven, Belgium, July 11-15, 2005 / 
Paul van Houtte;  Leo Kestens. Uetikon-Zuerich, Switzerland ; Enfield, NH: Trans Tech Publications, 2005. (Materials science forum ; 495-497) (Vol. 495-497, pp. 1645–1650). https://doi.org/10.4028/www.scientific.net/msf.495-497.1645

Guduru, R. K., Darling, K. A., Kishore, R., Scattergood, R. O., Koch, C. C., & Murty, K. L. (2005). Evaluation of mechanical properties using shear–punch testing. Materials Science and Engineering: A, 395(1-2), 307–314. https://doi.org/10.1016/j.msea.2004.12.048

Bakkal, M., Shih, A. J., McSpadden, S. B., Liu, C. T., & Scattergood, R. O. (2005). Light emission, chip morphology, and burr formation in drilling the bulk metallic glass. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 45(7-8), 741–752. https://doi.org/10.1016/j.ijmachtools.2004.11.004

Bakkal, M., Shih, A. J., McSpadden, S. B., & Scattergood, R. O. (2005). Thrust force, torque, and tool wear in drilling the bulk metallic glass. International Journal of Machine Tools and Manufacture, 45(7-8), 863–872. https://doi.org/10.1016/j.ijmachtools.2004.11.005

Youssef, K. M., Scattergood, R. O., Murty, K. L., Horton, J. A., & Koch, C. C. (2005). Ultrahigh strength and high ductility of bulk nanocrystalline copper. APPLIED PHYSICS LETTERS, 87(9). https://doi.org/10.1063/1.2034122

Bakkal, M., Shih, A. J., & Scattergood, R. O. (2004). Chip formation, cutting forces, and tool wear in turning of Zr-based bulk metallic glass. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 44(9), 915–925. https://doi.org/10.1016/j.ijmachtools.2004.02.002

Bakkal, M., Shih, A. J., Scattergood, R. O., & Liu, C. T. (2004). Machining of a Zr-Ti-Al-Cu-Ni metallic glass. SCRIPTA MATERIALIA, 50(5), 583–588. https://doi.org/10.1016/j.scriptamat.2003.11.052

Bakkal, M., Liu, C. T., Watkins, T. R., Scattergood, R. O., & Shih, A. J. (2004). Oxidation and crystallization of Zr-based bulk metallic glass due to machining. Intermetallics, 12(2), 195–204. https://doi.org/10.1016/j.internet.2003.09.017

Bakkal, M., Liu, C. T., Watkins, T. R., Scattergood, R. O., & Shih, A. J. (2004). Oxidation and crystallization of Zr-based bulk metallic glass due to machining. Intermetallics, 12(2), 195–204. https://doi.org/10.1016/j.intermet.2003.09.017

Youssef, K. M., Scattergood, R. O., Murty, K. L., & Koch, C. C. (2004). Ultratough nanocrystalline copper with a narrow grain size distribution. APPLIED PHYSICS LETTERS, 85(6), 929–931. https://doi.org/10.1063/1.1779342

Shih, A. J., Scattergood, R. O., Curry, A. C., Yonushonis, T. M., Gust, D. J., Grant, M. B., … Watkins, T. R. (2003). Cost-effective grinding of zirconia using the dense vitreous bond silicon carbide wheel. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 125(2), 297–303. https://doi.org/10.1115/1.1559167

Zhang, X., Wang, H., Scattergood, R. O., Narayan, J., & Koch, C. C. (2003). Evolution of microstructure and mechanical properties of in situ consolidated bulk ultra-fine-grained and nanocrystalline Zn prepared by ball milling. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 344(1-2), 175–181. https://doi.org/10.1016/s0921-5093(02)00422-7

Garrell, M. G., Shih, A. J., Lara-Curzio, E., & Scattergood, R. O. (2003). Finite-element analysis of stress concentration in ASTM D 638 tension specimens. Journal of Testing and Evaluation, 31(1), 52–57.

Curry, A. C., Shih, A. J., Kong, J., Scattergood, R. O., & McSpadden, S. B. (2003). Grinding temperature measurements in magnesia-partially-stabilized zirconia using infrared spectrometry. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 86(2), 333–341. https://doi.org/10.1111/j.1151-2916.2003.tb00019.x

Garrell, M. G., Shih, A. J., Ma, B. M., Lara-Curzio, E., & Scattergood, R. O. (2003). Mechanical properties of Nylon bonded Nd-Fe-B permanent magnets. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 257(1), 32–43. https://doi.org/10.1016/S0304-8853(02)00983-6

Garrell, M. G., Ma, B. M., Shih, A. J., Lara-Curzio, E., & Scattergood, R. O. (2003). Mechanical properties of polyphenylene-sulfide (PPS) bonded NdFe-B permanent magnets. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 359(1-2), 375–383. https://doi.org/10.1016/s0921-5093(03)00400-3

Qu, J., Riester, L., Shih, A. J., Scattergood, R. O., Lara-Curzio, E., & Watkins, T. R. (2003). Nanoindentation characterization of surface layers of electrical discharge machined WC-Co. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 344(1-2), 125–131. https://doi.org/10.1016/s0921-5093(02)00395-7

Zhu, X. K., Zhang, X., Wang, H., Sergueeva, A. V., Mukherjee, A. K., Scattergood, R. O., … Koch, C. C. (2003). Synthesis of bulk nanostructured Zn by combinations of cryomilling and powder consolidation by room temperature milling: optimizing mechanical properties. SCRIPTA MATERIALIA, 49(5), 429–433. https://doi.org/10.1016/S1359-6462(03)00297-5

Qu, J., Shih, A. J., & Scattergood, R. O. (2002). Development of the cylindrical wire electrical discharge machining process, part 1: Concept, design, and material removal rate. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 124(3), 702–707. https://doi.org/10.1115/1.1475321

Qu, J., Shih, A. J., & Scattergood, R. O. (2002). Development of the cylindrical wire electrical discharge machining process, part 2: Surface integrity and roundness. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 124(3), 708–714. https://doi.org/10.1115/1.1475989

Zhang, X., Wang, H., Scattergood, R. O., Narayan, J., & Koch, C. C. (2002). Mechanical properties of cyromilled nanocrystalline Zn studied by the miniaturized disk bend test. ACTA MATERIALIA, 50(13), 3527–3533. https://doi.org/10.1016/S1359-6454(02)00176-3

Zhang, X., Wang, H., Scattergood, R. O., Narayan, J., & Koch, C. C. (2002). Modulated oscillatory hardening and dynamic recrystallization in cryomilled nanocrystalline Zn. ACTA MATERIALIA, 50(16), 3995–4004. https://doi.org/10.1016/S1359-6454(02)00199-4

Zhang, X., Wang, H., Scattergood, R. O., Narayan, J., Koch, C. C., Sergueeva, A. V., & Mukherjee, A. K. (2002). Studies of deformation mechanisms in ultra-fine-grained and nanostructured Zn. ACTA MATERIALIA, 50(19), 4823–4830. https://doi.org/10.1016/S1359-6454(02)00349-X

Zhang, X., Wang, H., Scattergood, R. O., Narayan, J., Koch, C. C., Sergueeva, A. V., & Mukherjee, A. K. (2002). Tensile elongation (110%) observed in ultrafine-grained Zn at room temperature. APPLIED PHYSICS LETTERS, 81(5), 823–825. https://doi.org/10.1063/1.1494866

Rhoney, B. K., Shih, A. J., Scattergood, R. O., Ott, R., & McSpadden, S. B. (2002). Wear mechanism of metal bond diamond wheels trued by wire electrical discharge machining. WEAR, 252(7-8), 644–653. https://doi.org/10.1016/S0043-1648(02)00019-4

Rhoney, B. K., Shih, A. J., Scattergood, R. O., Akemon, J. L., Gust, D. J., & Grant, M. B. (2002). Wire electrical discharge machining of metal bond diamond wheels for ceramic grinding. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 42(12), 1355–1362. https://doi.org/10.1016/S0890-6955(02)00056-1

Sharp, K. W., Miller, M. H., & Scattergood, R. O. (2000). Analysis of the grain depth-of-cut in plunge grinding. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 24(3), 220–230. https://doi.org/10.1016/S0141-6359(00)00032-5

Tanikella, B. V., Gruss, K. A., Davis, R. F., & Scattergood, R. O. (1997). Indentation and microcutting fracture damage in a silicon carbide coating on an incoloy substrate. Surface & Coatings Technology, 88(1-3), 119–126. https://doi.org/10.1016/S0257-8972(96)02910-6

Roodposhti, P. S., Sarkar, A., Murty, K. L., & Scattergood, R. O. [Review of Effects of microstructure and processing methods on creep behavior of AZ91 magnesium alloy]. Journal of Materials Engineering and Performance, 25(9), 3697–3709.

Gupta, R. K., Darling, K. S., Raman, R. K. S., Ravi, K. R., Koch, C. C., Murty, B. S., & Scattergood, R. O. Synthesis, characterization and mechanical behaviour of an in situ consolidated nanocrystalline FeCrNi alloy.

Koch, C. C., Scattergood, R. O., Kotan, H., & Saber, M. Thermal stability of nanocrystalline grain size in ternary FE-base alloys. Recrystallization and grain growth v, 753, 341–344.

Koch, C. C., Scattergood, R. O., VanLeeuwen, B. K., & Darling, K. A. Thermodynamic stabilization of grain size in nanocrystalline metals. Recrystallization and grain growth iv, 715-716, 323–328.