Sindee Simon

Zhai, C., Koh, Y. P., Vogt, B. D., & Simon, S. L. (2024). Kinetics of nanoconfined benzyl methacrylate radical polymerization. Journal of Polymer Science, 62(9), 1922–1933. https://doi.org/10.1002/pol.20230332

Denton, A. A., Koh, Y. P., Simon, S. L., & McKenna, G. B. (2024). On the glass transition temperature of TNT. Thermochimica Acta, 736, 179733. https://doi.org/10.1016/j.tca.2024.179733

Pallaka, M. R., & Simon, S. L. (2024). The glass transition and enthalpy recovery of polystyrene nanorods using Flash differential scanning calorimetry. The Journal of Chemical Physics, 160(12). https://doi.org/10.1063/5.0190076

Koh, Y. P., Fondren, Z. T., Denton, A. A., Simon, S. L., & McKenna, G. B. (2022). Amorphization and Crystallization of Hexanitroazobenzene (HNAB) Using Conventional DSC and Flash DSC. Propellants, Explosives, Pyrotechnics, 47(10). https://doi.org/10.1002/prep.202100366

Lopez, E., Koh, Y. P., Zapata-Hincapie, J. A., & Simon, S. L. (2022, May 20). Composition-dependent glass transition temperature in mixtures: Evaluation of configurational entropy models. POLYMER ENGINEERING AND SCIENCE, Vol. 5. https://doi.org/10.1002/pen.26018

Tian, Q., Koh, Y. P., Orski, S. V., & Simon, S. L. (2022). Dodecyl Methacrylate Polymerization under Nanoconfinement: Reactivity and Resulting Properties. Macromolecules, 55(19), 8723–8730. https://doi.org/10.1021/acs.macromol.1c01724

Pallaka, M. R., Bari, R., & Simon, S. L. (2022). Origin of the broad endothermic peak observed at low temperatures for polystyrene and metals in Flash differential scanning calorimetry. POLYMER ENGINEERING AND SCIENCE, 62(9), 3059–3069. https://doi.org/10.1002/pen.26102

Sakib, N., Koh, Y. P., & Simon, S. L. (2022, July 27). The absolute heat capacity of polymer grafted nanoparticles using fast scanning calorimetry. POLYMER ENGINEERING AND SCIENCE, Vol. 7. https://doi.org/10.1002/pen.26078

Zhao, X., Grassia, L., & Simon, S. L. (2021). Mobility of Pressure-Densified and Pressure-Expanded Polystyrene Glasses: Dilatometry and a Test of KAHR Model. MACROMOLECULES, 54(18), 8352–8364. https://doi.org/10.1021/acs.macromol.1c00983

Zhao, X., Cheng, S., Koh, Y. P., Kelly, B. D., McKenna, G. B., & Simon, S. L. (2021). Prediction of the Synergistic Glass Transition Temperature of Coamorphous Molecular Glasses Using Activity Coefficient Models. MOLECULAR PHARMACEUTICS, 18(9), 3439–3451. https://doi.org/10.1021/acs.molpharmaceut.1c00353

Zhao, X., & Simon, S. L. (2020). A model-free analysis of configurational properties to reduce the temperature- and pressure-dependent segmental relaxation times of polymers. The Journal of Chemical Physics. https://doi.org/10.1063/1.5131623

Bari, R., Koh, Y. P., McKenna, G. B., & Simon, S. L. (2020). Decomposition of HMX in solid and liquid states under nanoconfinement. Thermochimica Acta, 686, 178542. https://doi.org/10.1016/j.tca.2020.178542

Tian, Q., Zhao, H., & Simon, S. L. (2020). Kinetic study of alkyl methacrylate polymerization in nanoporous confinement over a broad temperature range. Polymer, 205, 122868. https://doi.org/10.1016/j.polymer.2020.122868

Zhao, H., & Simon, S. L. (2020). Synthesis of polymers in nanoreactors: A tool for manipulating polymer properties. Polymer, 211, 123112. https://doi.org/10.1016/j.polymer.2020.123112

Sakib, N., Koh, Y. P., Huang, Y., Mongcopa, K. I. S., Le, A. N., Benicewicz, B. C., … Simon, S. L. (2020). Thermal and Rheological Analysis of Polystyrene-Grafted Silica Nanocomposites. Macromolecules, 53(6), 2123–2135. https://doi.org/10.1021/acs.macromol.9b02127

Bari, R., Denton, A. A., Fondren, Z. T., McKenna, G. B., & Simon, S. L. (2019). Acceleration of decomposition of CL-20 explosive under nanoconfinement. Journal of Thermal Analysis and Calorimetry, 140(6), 2649–2655. https://doi.org/10.1007/s10973-019-09027-5

Lee, J., Yeo, C.-D., Hu, Z., Thalangama-Arachchige, V. D., Kaur, J., Quitevis, E. L., … Simon, S. (2019). Friction and Wear of Pd-Rich Amorphous Alloy (Pd43Cu27Ni10P20) with Ionic Liquid (IL) as Lubricant at High Temperatures. Metals. https://doi.org/10.3390/met9111180

Zapata H, J. A., Simon, S. L., & Grady, B. P. (2019). Influence of diameter on the degradation profile of multiwall carbon nanotubes. Journal of Thermal Analysis and Calorimetry, 138(2), 1351–1362. https://doi.org/10.1007/s10973-019-08137-4

Zhai, C., Quitevis, E. L., & Simon, S. L. (2019). Kinetic Study of Curing Bisphenol A Dicyanate Ester with Ionic Liquid Additive. Journal of Polymer Science Part B: Polymer Physics. https://doi.org/10.1002/polb.24874

Qian, Z., Koh, Y. P., Pallaka, M. R., Chang, A. B., Lin, T.-P., Guzmán, P. E., … McKenna, G. B. (2019). Linear Rheology of a Series of Second-Generation Dendronized Wedge Polymers. Macromolecules, 52(5), 2063–2074. https://doi.org/10.1021/acs.macromol.8b02122

Grassia, L., Koh, Y. P., Rosa, M., & Simon, S. L. (2018). Complete Set of Enthalpy Recovery Data Using Flash DSC: Experiment and Modeling. Macromolecules, 51(4), 1549–1558. https://doi.org/10.1021/acs.macromol.7b02277

Koh, Y. P., & Simon, S. L. (2018). Enthalpy recovery of ultrathin polystyrene film using Flash DSC. Polymer, 143, 40–45. https://doi.org/10.1016/j.polymer.2018.02.038

Pallaka, M. R., Unruh, D. K., & Simon, S. L. (2018). Melting behavior of  n -alkanes in anodic aluminum oxide (AAO) nanopores using Flash differential scanning calorimetry. Thermochimica Acta, 663, 157–164. https://doi.org/10.1016/j.tca.2018.01.016

Zhang, F., Quirk, R. P., Gerislioglu, S., Wesdemiotis, C., Bekele, S., Tsige, M., … Foster, M. D. (2018). Synthesis and Characterization of Well-Defined, Tadpole-Shaped Polystyrene with a Single Atom Junction Point. Macromolecules, 51(23), 9509–9518. https://doi.org/10.1021/acs.macromol.8b01384

McKenna, G. B., & Simon, S. L. (2017). 50th Anniversary Perspective: Challenges in the Dynamics and Kinetics of Glass-Forming Polymers. Macromolecules, 50(17), 6333–6361. https://doi.org/10.1021/acs.macromol.7b01014

Yoon, H., Koh, Y. P., Simon, S. L., & McKenna, G. B. (2017). An Ultrastable Polymeric Glass: Amorphous Fluoropolymer with Extreme Fictive Temperature Reduction by Vacuum Pyrolysis. Macromolecules, 50(11), 4562–4574. https://doi.org/10.1021/acs.macromol.7b00623

Bari, R., & Simon, S. L. (2018). Determination of the nonlinearity and activation energy parameters in the TNM model of structural recovery. Journal of Thermal Analysis and Calorimetry, 4. https://doi.org/10.1007/s10973-017-6381-6

Tao, R., Gurung, E., Cetin, M. M., Mayer, M. F., Quitevis, E. L., & Simon, S. L. (2017). Fragility of ionic liquids measured by Flash differential scanning calorimetry. Thermochimica Acta, 654, 121–129. https://doi.org/10.1016/j.tca.2017.05.008

Simon, S. L., & McKenna, G. B. (2017). Structural Recovery and Physical Aging of Polymeric Glasses. In C. B. Roth (Ed.), Polymer Glasses (pp. 23–54,). Taylor & Francis.

Koh, Y. P., & Simon, S. L. (2017). The glass transition and enthalpy recovery of a single polystyrene ultrathin film using Flash DSC. The Journal of Chemical Physics, 146(20). https://doi.org/10.1063/1.4979126

Xue, L., Gurung, E., Tamas, G., Koh, Y. P., Shadeck, M., Simon, S. L., … Quitevis, E. L. (2016). Effect of Alkyl Chain Branching on Physicochemical Properties of Imidazolium-Based Ionic Liquids. Journal of Chemical and Engineering Data, 61(3), 1078–1091. https://doi.org/10.1021/acs.jced.5b00658

Lopez, E., & Simon, S. L. (2016). Signatures of Structural Recovery in Polystyrene by Nanocalorimetry. Macromolecules, 49(6), 2365–2374. https://doi.org/10.1021/acs.macromol.5b02112

Koh, Y. P., Gao, S., & Simon, S. L. (2016). Structural recovery of a single polystyrene thin film using Flash DSC at low aging temperatures. Polymer (United Kingdom), 96, 182–187. https://doi.org/10.1016/j.polymer.2016.04.047

Simon, S. L., & Koh, Y. P. (2016). The Glass Transition and Structural Recovery Using Flash DSC. https://doi.org/10.1007/978-3-319-31329-0_14

Tao, R., & Simon, S. L. (2015). Bulk and shear rheology of silica/polystyrene nanocomposite: Reinforcement and dynamics. Journal of Polymer Science, Part B: Polymer Physics, 53(9), 621–632. https://doi.org/10.1002/polb.23669

Simon, S. L. (2015). Dynamics of confined glass-forming liquids near equilibrium conditions. In Non-equilibrium Phenomena in Confined Soft Matter: Irreversible Adsorption, Physical Aging and Glass Transition at the Nanoscale (pp. 245–263). https://doi.org/10.1007/978-3-319-21948-6_11

Zhao, H. Y., & Simon, S. L. (2015). Equilibrium free-radical polymerization of methyl methacrylate under nanoconfinement. Polymer, 66, 173–178. https://doi.org/10.1016/j.polymer.2015.04.017

Gao, S., & Simon, S. L. (2015). Measurement of the limiting fictive temperature over five decades of cooling and heating rates. Thermochimica Acta, 603, 123–127. Retrieved from http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=CCC&KeyUT=CCC:000351646600016&KeyUID=CCC:000351646600016

Tao, R., & Simon, S. L. (2015). Pressure-volume-temperature and glass transition behavior of silica/polystyrene nanocomposite. Journal of Polymer Science Part B-Polymer Physics, 53(16), 1131–1138. https://doi.org/10.1002/polb.23749

Tao, R., & Simon, S. L. (2015). Rheology of Imidazolium-Based Ionic Liquids with Aromatic Functionality. Journal of Physical Chemistry B, 119(35), 11953–11959. https://doi.org/10.1021/acs.jpcb.5b06163

Shamim, N., Koh, Y. P., Simon, S. L., & McKenna, G. B. (2015). The glass transition of trinitrotoluene (TNT) by flash DSC. Thermochimica Acta, 620, 36–39. https://doi.org/10.1016/j.tca.2015.10.003

Lopez, E., & Simon, S. L. (2015). Trimerization Reaction Kinetics and T <inf>g</inf> Depression of Polycyanurate under Nanoconfinement. Macromolecules, 48(13), 4692–4701. https://doi.org/10.1021/acs.macromol.5b00167

Shamim, N., Koh, Y. P., Simon, S. L., & McKenna, G. B. (2014). Glass transition temperature of thin polycarbonate films measured by flash differential scanning calorimetry. Journal of Polymer Science, Part B: Polymer Physics, 52(22), 1462–1468. https://doi.org/10.1002/polb.23583

Gao, S., & Simon, S. L. (2014). Measurement of the limiting fictive temperature over five decades of cooling and heating rates. Thermochimica Acta. https://doi.org/10.1016/j.tca.2014.08.019

Koh, Y. P., Grassia, L., & Simon, S. L. (2015). Structural recovery of a single polystyrene thin film using nanocalorimetry to extend the aging time and temperature range. Thermochimica Acta, 603, 135–141. https://doi.org/10.1016/j.tca.2014.08.025

Zhao, H. Y., Yu, Z. N., Begum, F., Hedden, R. C., & Simon, S. L. (2014). The effect of nanoconfinement on methyl methacrylate polymerization: T-g, molecular weight, and tacticity. Polymer, 55(19), 4959–4965. https://doi.org/10.1016/j.polymer.2014.07.040

Gao, S., & Simon, S. L. (2014). The reaction kinetics of cyclopentadiene dimerization using differential scanning calorimetry: Experiments and modelling. Thermochimica Acta, 589, 241–246. https://doi.org/10.1016/j.tca.2014.05.031

Tao, R., Tamas, G., Xue, L., Simon, S. L., & Quitevis, E. L. (2014). Thermophysical Properties of Imidazolium-Based Ionic Liquids: The Effect of Aliphatic versus Aromatic Functionality. Journal of Chemical and Engineering Data, 59(9), 2717–2724. Retrieved from http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=CCC&KeyUT=CCC:000341619900004&KeyUID=CCC:000341619900004

Gao, S. Y., Koh, Y. P., & Simon, S. L. (2013). Calorimetric Glass Transition of Single Polystyrene Ultrathin Films. Macromolecules, 46(2), 562–570. https://doi.org/10.1021/ma3020036

Koh, Y. P., & Simon, S. L. (2013). Enthalpy Recovery of Polystyrene: Does a Long-Term Aging Plateau Exist? Macromolecules, 46(14), 5815–5821. https://doi.org/10.1021/ma40112361

Koh, Y. P., & Simon, S. L. (2013). Enthalpy recovery of polystyrene: Does a long-term aging plateau exist? Macromolecules, 46(14), 5815–5821. https://doi.org/10.1021/ma4011236

Begum, F., Sarker, R. H., & Simon, S. L. (2013). Modeling Ring/Chain Equilibrium in Nanoconfined Sulfur. Journal of Physical Chemistry B, 117(14), 3911–3916. https://doi.org/10.1021/jp400145n

Zhao, H. Y., Koh, Y. P., Pyda, M., Sen, S., & Simon, S. L. (2013). The kinetics of the glass transition and physical aging in germanium selenide glasses. Journal of Non-Crystalline Solids, 368, 63–70. https://doi.org/10.1016/j.jnoncryso1.2013.02.025

Zhao, H. Y., Koh, Y. P., Pyda, M., Sen, S., & Simon, S. L. (2013). The kinetics of the glass transition and physical aging in germanium selenide glasses. Journal of Non-Crystalline Solids, 368(1), 63–70. https://doi.org/10.1016/j.jnoncrysol.2013.02.025

Zhao, J., Simon, S. L., & McKenna, G. B. (2013). Using 20-million-year-old amber to test the super-Arrhenius behaviour of glass-forming systems. Nature Communications, 4. https://doi.org/10.1038/ncomms2809

Guo, J. X., Grassia, L., & Simon, S. L. (2012). Bulk and shear rheology of a symmetric three-arm star polystyrene. Journal of Polymer Science Part B-Polymer Physics, 50(17), 1233–1244. https://doi.org/10.1002/polb.23113

Koh, Y. P., & Simon, S. L. (2012). Crystallization and Vitrification of a Cyanurate Trimer in Nanopores. Journal of Physical Chemistry B, 116(26), 7754–7761. https://doi.org/10.1021/jp303318e

Koh, Y. P., Karim, M. N., & Simon, S. L. (2012). Heterogeneous reaction kinetics of epoxide-functionalized regenerated cellulose membrane and aliphatic amine. Thermochimica Acta, 543, 18–23. https://doi.org/10.1016/j.tca.2012.04.031

Begum, F., Zhao, H. Y., & Simon, S. L. (2012). Modeling methyl methacrylate free radical polymerization: Reaction in hydrophilic nanopores. Polymer, 53(15), 3238–3244. https://doi.org/10.1016/j.polymer.2012.05.023

Begum, F., Zhao, H., & Simon, S. L. (2012). Modeling methyl methacrylate free radical polymerization: Reaction in hydrophobic nanopores. Polymer, 53(15), 3261–3268. https://doi.org/10.1016/j.polymer.2012.04.036

Grassia, L., & Simon, S. L. (2012). Modeling volume relaxation of amorphous polymers: Modification of the equation for the relaxation time in the KAHR model. Polymer, 53(16), 3613–3620. https://doi.org/10.1016/j.polymer.2012.06.013

Zheng, W., Mohammed, A., Hines, L. G., Xiao, D., Martinez, O. J., Bartsch, R. A., … Quitevis, E. L. (2011). Effect of Cation Symmetry on the Morphology and Physicochemical Properties of Imidazolium Ionic Liquids. Journal of Physical Chemistry B, 115(20), 6572–6584. https://doi.org/10.1021/jp1115614

Koh, Y. P., & Simon, S. L. (2012). Erratum: Kinetic study of trimerization of monocyanate ester in nanopores (The Journal of Physical Chemistry B (2011) 115 (925-932) DOI: 10.1021/jp110192g). Journal of Physical Chemistry B, 116(1). https://doi.org/10.1021/jp210037z

Koh, Y. P., & Simon, S. L. (2011). Kinetic Study of Trimerization of Monocyanate Ester in Nanopores. Journal of Physical Chemistry B, 115(5), 925–932. https://doi.org/10.1021/jp110192g

Zhao, H. Y., & Simon, S. L. (2011). Methyl methacrylate polymerization in nanoporous confinement. Polymer, 52(18), 4093–4098. https://doi.org/10.1016/j.polymer.2011.06.048

Begum, F., & Simon, S. L. (2011). Modeling methyl methacrylate free radical polymerization in nanoporous confinement. Polymer, 52(7), 1539–1545. https://doi.org/10.1016/j.polymer.2011.02.009

Guo, J. X., & Simon, S. L. (2011). Thermodynamic scaling of polymer dynamics versus T - T-g scaling. Journal of Chemical Physics, 135(7). https://doi.org/10.1063/1.3624903

Simon, S. (2010). Journal of Thermal Analysis and Calorimetry: Preface. Journal of Thermal Analysis and Calorimetry, 102(2). https://doi.org/10.1007/s10973-010-0990-7

Grassia, L., D’Amore, A., & Simon, S. L. (2010). On the viscoelastic Poisson's ratio in amorphous polymers. Journal of Rheology, 54(5), 1009–1022. https://doi.org/10.1122/1.3473811

Guo, J. X., & Simon, S. L. (2010). Pressure-Volume-Temperature Behavior of Two Polycyanurate Networks. Journal of Polymer Science Part B-Polymer Physics, 48(23), 2509–2517. https://doi.org/10.1002/polb.22155

Zheng, W., McKenna, G. B., & Simon, S. L. (2010). The viscoelastic behavior of polymer/oligomer blends. Polymer, 51(21), 4899–4906. https://doi.org/10.1016/j.polymer.2010.08.046

Koh, Y. P., & Simon, S. L. (2010). Trimerization of Monocyanate Ester in Nanopores. Journal of Physical Chemistry B, 114(23), 7727–7734. https://doi.org/10.1021/jp912235c

Zheng, W., McKenna, G. B., & Simon, S. L. (2010). Viscoelasticity of polymer/oligomer athermal blends. Annual Technical Conference - ANTEC, Conference Proceedings, 3, 1901–1904. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-77956904901&partnerID=MN8TOARS

Meng, Y., Bernazzani, P., O’Connell, P. A., McKenna, G. B., & Simon, S. L. (2009). A new pressurizable dilatometer for measuring the time-dependent bulk modulus and pressure-volume-temperature properties of polymeric materials. Review of Scientific Instruments, 80(5). https://doi.org/10.1063/1.3122964

Dalle-Ferrier, C., Simon, S., Zheng, W., Badrinarayanan, P., Fennell, T., Frick, B., … Alba-Simionesco, C. (2009). Consequence of Excess Configurational Entropy on Fragility: The Case of a Polymer-Oligomer Blend. Physical Review Letters, 103(18). https://doi.org/10.1103/PhysRevLett.103.185702

Guo, J. X., & Simon, S. L. (2009). Effect of Crosslink Density on the Pressure Relaxation Response of Polycyanurate Networks. Journal of Polymer Science Part B-Polymer Physics, 47(24), 2477–2486. https://doi.org/10.1002/polb.21860

Simon, S. L., & McKenna, G. B. (2009). Experimental evidence against the existence of an ideal glass transition. Journal of Non-Crystalline Solids, 355(10-12), 672–675. https://doi.org/10.1016/j.jnoncrysol.2008.11.027

Li, Q. X., & Simon, S. L. (2009). Surface Chemistry Effects on the Reactivity and Properties of Nanoconfined Bisphenol M Dicyanate Ester in Controlled Pore Glass. Macromolecules, 42(10), 3573–3579. https://doi.org/10.1021/ma802808v

Koh, Y. P., Li, Q. X., & Simon, S. L. (2009). T-g and reactivity at the nanoscale. Thermochimica Acta, 492(1-2), 45–50. https://doi.org/10.1016/j.tca.2009.06.007

Win, K. Z., Karim, T., Li, Q. X., Simon, S. L., & McKenna, G. B. (2010). Thermal Pressure Coefficient of a Polyhedral Oligomeric Silsesquioxane (POSS)-Reinforced Epoxy Resin. Journal of Applied Polymer Science, 116(1), 142–146. https://doi.org/10.1002/app.31502

Li, Q. X., & Simon, S. L. (2008). Curing of bisphenol M dicyanate ester under nanoscale constraint. Macromolecules, 41(4), 1310–1317. https://doi.org/10.1021/ma702144b

Effect of structure on enthalpy relaxation of polycarbonate: Experiments and modeling. (2008). Polymer, 49(16), 3554–3560. https://doi.org/10.1016/j.polymer.2008.05.046

Koh, Y. P., & Simon, S. L. (2008). Structural Relaxation of Stacked Ultrathin Polystyrene Films. Journal of Polymer Science Part B-Polymer Physics, 46(24), 2741–2753. https://doi.org/10.1002/polb.21598

Koh, Y. P., & Simon, S. L. (2008). The glass transition and kinetics in stacked polystyrene ultrathin films. Technical Papers, Regional Technical Conference - Society of Plastics Engineers, 3, 1668–1673. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-52349117603&partnerID=MN8TOARS

Li, Q. X., Hutcheson, S. A., McKenna, G. B., & Simon, S. L. (2008). Viscoelastic Properties and Residual Stresses in Polyhedral Oligomeric Silsesquioxane-Reinforced Epoxy Matrices. Journal of Polymer Science Part B-Polymer Physics, 46(24), 2719–2732. https://doi.org/10.1002/polb.21609

Li, Q., Hutcheson, S. A., McKenna, G. B., & Simon, S. L. (2008). Viscoelastic properties and residual stresses in polyhedral oligomeric silsequioxane (POSS)-reinforced epoxy. Technical Papers, Regional Technical Conference - Society of Plastics Engineers, 3, 1923–1929. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-52349097009&partnerID=MN8TOARS

Zheng, W., & Simon, S. L. (2007). Confinement effects on the glass transition of hydrogen bonded liquids. Journal of Chemical Physics, 127(19). https://doi.org/10.1063/1.2793787

Li, Q., & Simon, S. L. (2007). Curing of bisphenol M dicyanate ester under nanoscale constraint. Annual Technical Conference - ANTEC, Conference Proceedings, 3, 1750–1755. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-34648840786&partnerID=MN8TOARS

Li, Z. Z., Li, Q. X., Simon, S., Guven, N., Borges, K., & Youan, B. B. C. (2007). Formulation of spray-dried phenytoin loaded poly(epsilon-caprolactone) microcarrier intended for brain delivery to treat epilepsy. Journal of Pharmaceutical Sciences, 96(5), 1018–1030. https://doi.org/10.1002/jps.20935

Badrinarayanan, P., Zheng, W., & Simon, S. L. (2008). Isoconversion analysis of the glass transition. Thermochimica Acta, 468(1-2), 87–93. https://doi.org/10.1016/j.tca.2007.11.020

Badrinarayanan, P., Zheng, W., & Simon, S. L. (2007). Isoconversion analysis of the glass transition. Annual Technical Conference - ANTEC, Conference Proceedings, 3, 1756–1760. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-34648840782&partnerID=MN8TOARS

Simon, S. L. (2007). Measurement of the glass transition temperature. Annual Technical Conference - ANTEC, Conference Proceedings, 5, 2617–2620. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-34648846828&partnerID=MN8TOARS

Badrinarayanan, P., & Simon, S. L. (2007). Origin of the divergence of the timescales for volume and enthalpy recovery. Polymer, 48(6), 1464–1470. https://doi.org/10.1016/j.polymer.2007.01.064

Meng, Y., & Simon, S. L. (2007). Pressure relaxation of polystyrene and its comparison to the shear response. Journal of Polymer Science Part B-Polymer Physics, 45(24), 3375–3385. https://doi.org/10.1002/polb.21320

Zheng, W., & Simon, S. L. (2007). Tg in polymer/oligomer athermal blends. Annual Technical Conference - ANTEC, Conference Proceedings, 3, 1788–1792. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-34648835233&partnerID=MN8TOARS

Zheng, W., & Simon, S. L. (2008). The glass transition in athermal poly(alpha-methyl styrene)/oligomer blends. Journal of Polymer Science Part B-Polymer Physics, 46(4), 418–430. https://doi.org/10.1002/polb.21379

Badrinarayanan, P., Zheng, W., Li, Q. X., & Simon, S. L. (2007). The glass transition temperature versus the fictive temperature. Journal of Non-Crystalline Solids, 353(26), 2603–2612. https://doi.org/10.1016/j.jnoncrysol.2007.04.025

Sun, J., & Simon, S. L. (2007). The melting behavior of aluminum nanoparticles. Thermochimica Acta, 463(1-2), 32–40. https://doi.org/10.1016/j.tca.2007.07.007

Pitchimani, R., Zheng, W., Simon, S. L., Hope-Weeks, L. J., Burnham, A. K., & Weeks, B. L. (2007). Thermodynamic analysis of pure and impurity doped pentaerythritol tetranitrate crystals grown at room temperature. Journal of Thermal Analysis and Calorimetry, 89(2), 475–478. https://doi.org/10.1007/s10973-006-8462-9

Li, Q. X., & Simon, S. L. (2007). Viscoelastic shear response and network structure in polycyanurates. Macromolecules, 40(6), 2246–2256. https://doi.org/10.1021/ma0624144

Koh, Y. P., McKenna, G. B., & Simon, S. L. (2006). Calorimetric glass transition temperature and absolute heat capacity of polystyrene ultrathin films. Journal of Polymer Science Part B-Polymer Physics, 44(24), 3518–3527. https://doi.org/10.1002/polb.21021

Sun, J., Pantoya, M. L., & Simon, S. L. (2006). Dependence of size and size distribution on reactivity of aluminum nanoparticles in reactions with oxygen and MoO3. Thermochimica Acta, 444(2), 117–127. https://doi.org/10.1016/j.tca.2006.03.001

Li, Q., & Simon, S. L. (2006). Enthalpy recovery of polymeric glasses: Is the theoretical limiting liquid line reached? Polymer, 47(13), 4781–4788. https://doi.org/10.1016/j.polymer.2006.04.046

Li, Q., & Simon, S. L. (2006). Enthalpy recovery: Do materials reach the equilibrium LINE? Annual Technical Conference - ANTEC, Conference Proceedings, 3, 1674–1678. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33745605220&partnerID=MN8TOARS

Meng, Y., & Simon, S. L. (2006). Measurement of the bulk modulus using pressurizable dilatometry. Annual Technical Conference - ANTEC, Conference Proceedings, 3, 1730–1734. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33745594834&partnerID=MN8TOARS

Zheng, W., & Simon, S. L. (2006). Polystyrene freeze-dried from dilute solution: Tg depression and residual solvent effects. Polymer, 47(10), 3520–3527. https://doi.org/10.1016/j.polymer.2006.03.035

Lahlouh, B., Rajagopalan, T., Biswas, N., Sun, J., Huang, D., Simon, S. L., … Gangopadhyay, S. (2006). Post treatments of plasma-enhanced chemical vapor deposited hydrogenated amorphous silicon carbide for low dielectric constant films. Thin Solid Films, 497(1-2), 109–114. https://doi.org/10.1016/j.tsf.2005.10.085

Simon, S. L., & Bernazzani, P. (2006). Structural relaxation in the glass: Evidence for a path dependence of the relaxation time. Journal of Non-Crystalline Solids, 352(42-49), 4763–4768. https://doi.org/10.1016/j.jnoncrysol.2006.01.151

Koh, Y. P., McKenna, G. B., & Simon, S. L. (2006). The calorimetric glass transition of free standing polystyrene thin films. Annual Technical Conference - ANTEC, Conference Proceedings, 3, 1506–1509. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33745685815&partnerID=MN8TOARS

Badrinarayanan, P., Zheng, W., & Simon, S. L. (2006). The glass transition temperature versus the fictive temperature. Annual Technical Conference - ANTEC, Conference Proceedings, 3, 1669–1673. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33745592787&partnerID=MN8TOARS

Meng, Y., O’Connell, P., McKenna, G. B., & Simon, S. L. (2005). A new pressurizable dilatometer for measuring bulk modulus of thermosets. Annual Technical Conference - ANTEC, Conference Proceedings, 8, 335–339. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33644995646&partnerID=MN8TOARS

Huang, D., Simon, S. L., & McKenna, G. B. (2005). Chain length dependence of heat capacity. Annual Technical Conference - ANTEC, Conference Proceedings, 8, 101–103. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33644998802&partnerID=MN8TOARS

Huang, D. H., Simon, S. L., & McKenna, G. B. (2005). Chain length dependence of the thermodynamic properties of linear and cyclic alkanes and polymers. Journal of Chemical Physics, 122(8). https://doi.org/10.1063/1.1852453

Merzlyakov, M., McKenna, G. B., & Simon, S. L. (2006). Cure-induced and thermal stresses in a constrained epoxy resin. Composites Part a-Applied Science and Manufacturing, 37(4), 585–591. https://doi.org/10.1016/j.compositesa.2005.05.013

Merzlyakov, M., Simon, S. L., & McKenna, G. B. (2005). Instrumented thick-walled tube method for measuring thermal pressure in fluids and isotropic stresses in thermosetting resins. Review of Scientific Instruments, 76(6). https://doi.org/10.1063/1.1930069

Rajagopalan, T., Lahlouh, B., Lubguban, J. A., Biswas, N., Gangopadhyay, S., Sun, J., … Butler, R. (2006). Investigation on hexamethyldisilazane vapor treatment of plasma-damaged nanoporous organosilicate films. Applied Surface Science, 252(18), 6323–6331. https://doi.org/10.1016/j.apsusc.2005.08.060

Doshi, P., & Simon, S. (2005). Modeling nanoporosity development in polymer films for low-k applications. Polymer Engineering and Science, 45(5), 640–651. https://doi.org/10.1002/pen.20317

Meng, Y., & Simon, S. L. (2005). Relation between mobility factor and diffusion factor for thermoset cure. Thermochimica Acta, 437(1-2), 179–189. https://doi.org/10.1016/j.tca.2005.06.032

Kolla, S., & Simon, S. L. (2005). Volume recovery and the tau-effective paradox. Annual Technical Conference - ANTEC, Conference Proceedings, 6, 284–288. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33645034617&partnerID=MN8TOARS

Merzlyakov, M., McKenna, G. B., & Simon, S. L. (2004). Effect of cure cycle on residual stress development in thermosetting materials. Annual Technical Conference - ANTEC, Conference Proceedings, 2, 2227–2230. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-2442597266&partnerID=MN8TOARS

Simon, S. L., Bernazzani, P., & McKenna, G. B. (2004). Effects of freeze-drying on the glass temperature of cyclic polystyrenes. Annual Technical Conference - ANTEC, Conference Proceedings, 2, 2252–2257. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-2442655675&partnerID=MN8TOARS

Merzlyakov, M., Meng, Y., Simon, S. L., & McKenna, G. B. (2004). Instrumented sphere method for measuring thermal pressure in fluids and isotropic stresses and reaction kinetics in thermosetting resins. Review of Scientific Instruments, 75(10), 3327–3334. https://doi.org/10.1063/1.1790584

Meng, Y., & Simon, S. L. (2004). Relation between mobility and diffusion factors for thermoset cure. Annual Technical Conference - ANTEC, Conference Proceedings, 2, 2212–2216. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-2442601546&partnerID=MN8TOARS

Lubguban, J. A., Gangopadhyay, S., Lahlouh, B., Rajagopalan, T., Biswas, N., Sun, J., … Toney, M. F. (2004). Supercritical CO2 extraction of porogen phase: An alternative route to nanoporous dielectrics. Journal of Materials Research, 19(11), 3224–3233. https://doi.org/10.1557/jmr.2004.0413

Kolla, S., & Simon, S. L. (2005). The tau-effective paradox: new measurements towards a resolution. Polymer, 46(3), 733–739. https://doi.org/10.1016/j.polymer.2004.11.086

Alcoutlabi, M., McKenna, G. B., & Simon, S. L. (2003). Analysis of the development of isotropic residual stresses in a bismaleimide/spiro orthocarbonate thermosetting resin for composite materials. Journal of Applied Polymer Science, 88(1), 227–244. https://doi.org/10.1002/app.11649

Lahlouh, B., Rajagopalan, T., Lubguban, J. A., Biswas, N., Gangopadhyay, S., Sun, J., … Kikkawa, T. (2003). Creating nanoporosity by selective extraction of porogens using supercritical carbon dioxide/cosolvent processes. In Materials, Technology and Reliability For Advanced Interconnects and Low-K Dielectrics-2003 (Vol. 766, pp. 291–296). Retrieved from http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000187620400041&KeyUID=WOS:000187620400041

Lahlouh, B., Rajagopalan, T., Lubguban, J. A., Biswas, N., Gangopadhyay, S., Sun, J., … Miller, R. D. (2003). Creating nanoporosity by selective extraction of porogens using supercritical carbon dioxide/cosolvent processes. Materials Research Society Symposium - Proceedings, 766, 291–296. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0348199041&partnerID=MN8TOARS

Bernazzani, P., & Simon, S. L. (2003). Depression of Tg in polystyrene by freeze-drying. Annual Technical Conference - ANTEC, Conference Proceedings, 2, 1987–1991. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0141728393&partnerID=MN8TOARS

Simon, S. L., Bernazzani, P., & McKenna, G. B. (2003). Effects of freeze-drying on the glass temperature of cyclic polystyrenes. Polymer, 44(26), 8025–8032. https://doi.org/10.1016/j.polymer.2003.10.010

Echeverria, I., Kolek, P. L., Plazek, D. J., & Simon, S. L. (2003). Enthalpy recovery, creep and creep-recovery measurements during physical aging of amorphous selenium. Journal of Non-Crystalline Solids, 324(3), 242–255. https://doi.org/10.1016/s0022-3093(03)

Echeverría, I., Kolek, P. L., Plazek, D. J., & Simon, S. L. (2003). Enthalpy recovery, creep and creep-recovery measurements during physical aging of amorphous selenium. Journal of Non-Crystalline Solids, 324(3), 242–255. https://doi.org/10.1016/S0022-3093(03)00245-X

Huang, D. H., Simon, S. L., & McKenna, G. B. (2003). Equilibrium heat capacity of the glass-forming poly(alpha-methyl styrene) far below the Kauzmann temperature: The case of the missing glass transition. Journal of Chemical Physics, 119(7), 3590–3593. https://doi.org/10.1063/1.1599271

Merzlyakov, M., Meng, Y., Simon, S. L., & McKenna, G. B. (2003). Evaluation of different methods of measurement for the isotropic stress development in curing thermosets. Annual Technical Conference - ANTEC, Conference Proceedings, 2, 1898–1902. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0141728409&partnerID=MN8TOARS

Simon, S. L. (2003). Physical Aging. In J. Kroschwitz (Ed.), Encyclopedia of Polymer Science and Technology. John Wiley & Sons.

Simon, S. L., Wiesner, T. F., & Heinze, L. R. (2003). Program improvements resulting from completion of one ABET 2000 assessment cycle. ASEE Annual Conference Proceedings, 9161–9166. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-8744310747&partnerID=MN8TOARS

Rajagopalan, T., Lahlouh, B., Lubguban, J. A., Biswas, N., Gangopadhyay, S., Sun, J., … Miller, R. D. (2003). Supercritical carbon dioxide extraction of porogens for the preparation of ultralow-dielectric-constant films. Applied Physics Letters, 82(24), 4328–4330. https://doi.org/10.1063/1.1583139

McKenna, G. B., & Simon, S. L. (2002). Chapter 2 The glass transition: Its measurement and underlying physics. In Handbook of Thermal Analysis and Calorimetry (Vol. 3, pp. 49–109). https://doi.org/10.1016/S1573-4374(02)80005-X

Bernatz, K. M., Echeverria, I., Simon, S. L., & Plazek, D. J. (2002). Characterization of the molecular structure of amorphous selenium using recoverable creep compliance measurements. Journal of Non-Crystalline Solids, 307, 790–801. https://doi.org/10.1016/s0022-3093(02)01522-3

Bernazzani, P., Simon, S. L., Plazek, D. J., & Ngai, K. L. (2002). Effects of entanglement concentration on T-g and local segmental motions. European Physical Journal E, 8(2), 201–207. https://doi.org/10.1140/epje/i2001-10087-5

Simon, S. L., Park, J. Y., & McKenna, G. B. (2002). Enthalpy recovery of a glass-forming liquid constrained in a nanoporous matrix: Negative pressure effects. European Physical Journal E, 8(2), 209–216. https://doi.org/10.1140/epje/i2001-10072-0

Bernatz, K. M., Echeverría, I., Simon, S. L., & Plazek, D. J. (2002). Erratum: Viscoelastic properties of amorphous boron trioxide (Journal of Non-Crystalline Solids (2001) 289 (9-16) PII: S0022309301007256). Journal of Non-Crystalline Solids, 297(2-3). https://doi.org/10.1016/S0022-3093(01)00969-3

Lubguban, J., Rajagopalan, T., Mehta, N., Lahlouh, B., Simon, S. L., & Gangopadhyay, S. (2002). Low-k organosilicate films prepared by tetravinyltetramethylcyclotetrasiloxane. Journal of Applied Physics, 92(2), 1033–1038. https://doi.org/10.1063/1.1483916

Zheng, Y., Simon, S. L., & McKenna, G. B. (2002). Modeling structural recovery in glasses: An analysis of the peak-shift method. Journal of Polymer Science Part B-Polymer Physics, 40(18), 2027–2036. https://doi.org/10.1002/polb.10270

Lubguban, J. A., Sun, J., Rajagopalan, T., Lahlouh, B., Simon, S. L., & Gangopadhyay, S. (2002). Supercritical carbon dioxide extraction to produce low-k plasma enhanced chemical vapor deposited dielectric films. Applied Physics Letters, 81(23), 4407–4409. https://doi.org/10.1063/1.1525390

Bernazzani, P., & Simon, S. L. (2002). Volume recovery of polystyrene: evolution of the characteristic relaxation time. Journal of Non-Crystalline Solids, 307, 470–480. https://doi.org/10.1016/s0022-3093(02)01463-1

Prasatya, P., McKenna, G. B., & Simon, S. L. (2001). A viscoelastic model for predicting isotropic residual stresses in thermosetting materials: Effects of processing parameters. Journal of Composite Materials, 35(10), 826–848. https://doi.org/10.1177/002199801772662424

Prasatya, P., McKenna, G. B., & Simon, S. L. (2001). A viscoelastic model for predicting isotropic residual stresses in thermosetting materials: Effects of processing parameters. Journal of Composite Materials, 35(10), 826–848. https://doi.org/10.1106/D0JJ-V6Q1-891M-3GJR

Simon, S. L. (2001). Fitting differential scanning calorimetry heating curves for polyetherimide using a model of structural recovery. In ACS Symposium Series (pp. 188–198). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0345447631&partnerID=MN8TOARS

Simon, S. L. (2001). Temperature-modulated differential scanning calorimetry: theory and application. Thermochimica Acta, 374(1), 55–71. https://doi.org/10.1016/s0040-6031(01)00493-2

Bernatz, K. M., Echeverria, I., Simon, S. L., & Plazek, D. J. (2001). Viscoelastic properties of amorphous boron trioxide. Journal of Non-Crystalline Solids, 289(1-3), 9–16. https://doi.org/10.1016/s0022-3093(01)00725-6

Simon, S. L., Sobieski, J. W., & Plazek, D. J. (2001). Volume and enthalpy recovery of polystyrene. Polymer, 42(6), 2555–2567. https://doi.org/10.1016/s0032-3861(00)00623-6

Simon, S. L., McKenna, G. B., & Sindt, O. (2000). Modeling the evolution of the dynamic mechanical properties of a commercial epoxy during cure after gelation. Journal of Applied Polymer Science, 76(4), 495–508. https://doi.org/10.1002/(sici)1097-4628(20000425)76:4<495::aid-app7>3.0.co;2-b

Simon, S. L., Mckenna, G. B., & Sindt, O. (2000). Modeling the evolution of the dynamic mechanical properties of a commercial epoxy during cure after gelation. Journal of Applied Polymer Science, 76(4), 495–508. https://doi.org/10.1002/(SICI)1097-4628(20000425)76:4<495::AID-APP7>3.0.CO;2-B

Simon, S. L., & McKenna, G. B. (2000). Quantitative analysis of errors in TMDSC in the glass transition region. Thermochimica Acta, 348(1-2), 77–89. https://doi.org/10.1016/s0040-6031(99)00482-7

McKenna, G. B., & Simon, S. L. (2000). Time dependent volume and enthalpy responses in polymers. In R. A. Schapery & C. T. Sun (Eds.), Time Dependent and Nonlinear Effects in Polymers and Composites (Vol. 1357, pp. 18–46). https://doi.org/10.1520/stp15827s

McKenna, G. B., & Simon, S. L. (2000). Time dependent volume and enthalpy responses in polymers. ASTM Special Technical Publication, (1357), 18–46. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0033882869&partnerID=MN8TOARS

Karmana, E., Simon, S., & Enick, R. (1999). Carbon-dioxide-based microsortation of postconsumer polyolefins and its effect on polyolefin properties. Polymer-Plastics Technology and Engineering, 38(3), 433–444. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0032860242&partnerID=MN8TOARS

Zacharia, R. E., Simon, S. L., Beckman, E. J., & Enick, R. M. (1999). Improving the thermal stability of a polymer through liquid carbon dioxide extraction of a metal compound. Polymer Degradation and Stability, 63(1), 85–88. https://doi.org/10.1016/s0141-3910(98)00065-2

Simon, S. L., & McKenna, G. B. (1999). Measurement of thermal conductivity using TMDSC: Solution to the heat flow problem. Journal of Reinforced Plastics and Composites, 18(6), 559–571. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0032641503&partnerID=MN8TOARS

Bernatz, K. M., Giri, L., Simon, S. L., & Plazek, D. J. (1999). Physical aging by periodic creep and interrupted creep experiments. Journal of Chemical Physics, 111(5), 2235–2241. https://doi.org/10.1063/1.479495

Sindt, O., Simon, S. L., McKenna, G. B., & Liang, E. (1998). Cure, shrinkage and properties of an epoxy material. Annual Technical Conference - ANTEC, Conference Proceedings, 2, 1658–1662. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0031676841&partnerID=MN8TOARS

Zacharia, R. E., & Simon, S. L. (1998). Dynamic and isothermal thermogravimetric analysis of a polycyanurate thermosetting system. Polymer Engineering and Science, 38(4), 566–572. https://doi.org/10.1002/pen.10219

Simon, S. L. (1998). Fitting DSC Heating Curves with the Tool-Narayanaswamy-Moynihan Model of Structural Recovery. In M. R. Tant & A. J. Hill (Eds.), Structure and Properties of Glassy Polymers. Oxford University Press, UK.

Simon, S. L. (1998). Fitting Differential Scanning Calorimetry Heating Curves for Polyetherimide Using a Model of Structural Recovery. In ACS Symposium Series (Vol. 710, pp. 188–198). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0041854210&partnerID=MN8TOARS

Simon, S. L., & McKenna, G. B. (1998). Measurement of thermal conductivity using temperature-modulated differential scanning calorimetry: Solution to the heat flow problem. Annual Technical Conference - ANTEC, Conference Proceedings, 2, 2042–2046. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0031702966&partnerID=MN8TOARS

Echeverria, I., & Simon, S. L. (1998). Structural Relaxation of Poly(Ether Imide): A Comparison of the Times to Reach Equilibrium for Different Properties" in "Recent Research Developments in Polymer Science. In A. B. Salamone, J. Brandrup, R. M. Ottenbrite, & D. G. Pandalai (Eds.), Recent Research Developments in Polymer Science (Vol. 2). Trivandrum, India.

Wolf, E. M., Simon, S. L., & Plazek, D. J. (1998). Volume and enthalpy recovery of polystyrene. Annual Technical Conference - ANTEC, Conference Proceedings, 3, 3411–3414. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0031649650&partnerID=MN8TOARS

Sobieski, J. W., Simon, S. L., & Plazek, D. J. (1997). Dilatometric studies of physical aging of polyetherimide. Journal of Thermal Analysis, 49(1), 455–460. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030654102&partnerID=MN8TOARS

Zacharia, R. E., & Simon, S. L. (1997). Effect of catalyst on the thermal degradation of a polycyanurate thermosetting system. Journal of Applied Polymer Science, 64(1), 127–131. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0031552336&partnerID=MN8TOARS

Simon, S. L., & McKenna, G. B. (1997). Effects of structural recovery in modulated DSC. Annual Technical Conference - ANTEC, Conference Proceedings, 2, 2232–2237. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030719137&partnerID=MN8TOARS

Simon, S. L. (1997). Enthalpy recovery of poly(ether imide): Experiment and model calculations incorporating thermal gradients. Macromolecules, 30(14), 4056–4063. https://doi.org/10.1021/ma9614508

Simon, S. L. (1997). Enthalpy recovery of polyetherimide: experiment and model calculations. Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering, 76, 489–490. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030643363&partnerID=MN8TOARS

Simon, S. L., & McKenna, G. B. (1997). Interpretation of the dynamic heat capacity observed in glass-forming liquids. Journal of Chemical Physics, 107(20), 8678–8685. https://doi.org/10.1063/1.475020

Simon, S. L. (1997). Modeling DSC annealing peaks for polyetherimide: Incorporation of temperature gradients. In C. A. Angell, K. L. Ngai, J. Kieffer, T. Egami, & G. U. Nienhaus (Eds.), Structure and Dynamics of Glasses and Glass Formers (Vol. 455, pp. 177–182).

Simon, S. L. (1997). Modeling DSC annealing peaks for polyetherimide: incorporation of temperature gradients. Materials Research Society Symposium - Proceedings, 455, 177–182. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030659915&partnerID=MN8TOARS

Simon, S. L., Plazek, D. J., Sobieski, J. W., & McGregor, E. T. (1997). Physical aging of a polyetherimide: Volume recovery and its comparison to creep and enthalpy measurements. Journal of Polymer Science Part B-Polymer Physics, 35(6), 929–936. https://doi.org/10.1002/(sici)1099-0488(19970430)35:6<929::aid-polb7>3.0.co;2-c

Simon, S. L., Plazek, D. J., Harper, B. J., & Holden, T. (1997). Physical aging of polystyrene: volume and enthalpy recovery. Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering, 76, 334–335. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030646244&partnerID=MN8TOARS

Simon, S. L., & McKenna, G. B. (1997). The effects of structural recovery and thermal lag in temperature-modulated DSC measurements. Thermochimica Acta, 307(1), 1–10. https://doi.org/10.1016/s0040-6031(97)00275-x

Zacharia, R. E., & Simon, S. L. (1997). Thermogravimetric analysis of a polycyanurate thermosetting material. Journal of Thermal Analysis, 49(1), 311–315. https://doi.org/10.1007/bf01987452

Simon, S. L., & Plazek, D. J. (1996). Physical aging of polyetherimide: enthalpy, volume, and creep measurements. Technical Papers, Regional Technical Conference - Society of Plastics Engineers. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030360547&partnerID=MN8TOARS

Simon, S. L. (1996). Thermal stability of a polycyanurate thermosetting system: effects of cure catalysts. Technical Papers, Regional Technical Conference - Society of Plastics Engineers. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0030364342&partnerID=MN8TOARS

Echeverria, I., Su, P. C., Simon, S. L., & Plazek, D. J. (1995). PHYSICAL AGING OF A POLYETHERIMIDE - CREEP AND DSC MEASUREMENTS. Journal of Polymer Science Part B-Polymer Physics, 33(17), 2457–2468. https://doi.org/10.1002/polb.1995.090331717

Simon, S. L., & Gillham, J. K. (1994). Application of thermosetting cure diagrams. Annual Technical Conference - ANTEC, Conference Proceedings, (pt 2), 2192–2195. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0027989115&partnerID=MN8TOARS

Simon, S. L., & Gillham, J. K. (1994). CONVERSION TEMPERATURE PROPERTY DIAGRAM FOR A LIQUID DICYANATE ESTER HIGH-TG POLYCYANURATE THERMOSETTING SYSTEM. Journal of Applied Polymer Science, 51(10), 1741–1752. https://doi.org/10.1002/app.1994.070511007

Simon, S. L., & Gillham, J. K. (1994). Cyanate ester/polycyanurate systems: structure-property relationships. https://doi.org/10.1007/978-94-011-1326-7_4

Simon, S. L., & Gillham, J. K. (1994). THERMOSETTING CURE DIAGRAMS - CALCULATION AND APPLICATION. Journal of Applied Polymer Science, 53(6), 709–727. https://doi.org/10.1002/app.1994.070530601

Simon, S. L., & Gillham, J. K. (1993). COATINGS APPLICATIONS OF THERMOSETTING CURE DIAGRAMS - OFF-STOICHIOMETRIC HIGH-TG EPOXY-AMINE SYSTEMS. Journal of Coatings Technology, 65(823), 57–65. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0027648874&partnerID=MN8TOARS

Simon, S. L., & Gillham, J. K. (1993). CURE KINETICS OF A THERMOSETTING LIQUID DICYANATE ESTER MONOMER HIGH-TG POLYCYANURATE MATERIAL. Journal of Applied Polymer Science, 47(3), 461–485. https://doi.org/10.1002/app.1993.070470308

Simon, S. L., & Gillham, J. K. (1992). Cure and TTT diagram for a high-Tg epoxy-/amine system: Application to powder coatings. Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering, 67, 342–343. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0027004447&partnerID=MN8TOARS

Simon, S. L., & Gillham, J. K. (1992). Cure of a dicyanate ester/polycyanurate system. Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering, 66, 453–454. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0026973293&partnerID=MN8TOARS

Simon, S. L., & Gillham, J. K. (1992). Physical aging of a dicyanate ester/polycyanurate material. Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering, 66, 277–278. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0026980695&partnerID=MN8TOARS

Simon, S. L., & Gillham, J. K. (1992). REACTION-KINETICS AND TTT CURE DIAGRAMS FOR OFF-STOICHIOMETRIC RATIOS OF A HIGH-TG EPOXY/AMINE SYSTEM. Journal of Applied Polymer Science, 46(7), 1245–1270. https://doi.org/10.1002/app.1992.070460714

Simon, S. L., & Gillham, J. K. (1992). TgTP diagram for a dicyanate ester/polycyanurate system. Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering, 66, 502–503. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0026981611&partnerID=MN8TOARS

Simon, S. L., & Gillham, J. K. (1991). Cure kinetics of a liquid high-Tg dicyanate ester/polycyanurate system. Annual Technical Conference - ANTEC, Conference Proceedings, 37, 1554–1558. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0025748929&partnerID=MN8TOARS

Simon, S. L., Gillham, J. K., & Shimp, D. A. (1990). Cure of a high-Tg liquid thermosetting dicyanate ester/polycyanurate system. Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering, 62, 96–100. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0025254997&partnerID=MN8TOARS

Simon, S. L., & Gillham, J. K. (1990). Effect of conversion and temperature on the physical annealing of a high-Tg dicyanate ester/polycyanurate material. Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering, 63, 760–766. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0025637443&partnerID=MN8TOARS

Simon, S. L., Wisanrakkit, G., & Gillham, J. K. (1989). Reaction kinetics and calculation of iso-T$/g$/ and vitrification curves in the TTT diagram for a high Tg epoxy/amine system. Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering, 61, 799–805. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0024890883&partnerID=MN8TOARS