Works (45)

Updated: August 24th, 2024 05:01

2023 journal article

Deep Neural Networks in Natural Language Processing for Classifying Requirements by Origin and Functionality: An Application of BERT in System Requirements

JOURNAL OF MECHANICAL DESIGN, 146(4).

By: J. Mullis*, C. Chen*, B. Morkos* & S. Ferguson n

author keywords: requirement management; requirement classification; natural language processing; design automation; BERT
Source: Web Of Science
Added: August 19, 2024

2023 article

Margins in design - review of related concepts and methods

Brahma, A., Ferguson, S., Eckert, C., & Isaksson, O. (2023, June 21). JOURNAL OF ENGINEERING DESIGN.

author keywords: Engineering design margin; excess; buffer; overdesign; safety factor
Source: Web Of Science
Added: July 3, 2023

2021 article

Toward Quantifiable Evidence of Excess' Value Using Personal Gaming Desktops

Long, D., Morkos, B., & Ferguson, S. (2021, March 1). JOURNAL OF MECHANICAL DESIGN, Vol. 143.

By: D. Long n, B. Morkos* & S. Ferguson n

author keywords: excess; value; requirements modeling; uncertainty; technology forecasting; design evaluation; systems design
TL;DR: The argument that engineers (and end-users) should embrace strategic inefficiencies—even though they might never be used—is strengthened, and evidence is provided that excess can improve end-user system value when future requirements are unknown. (via Semantic Scholar)
Source: Web Of Science
Added: March 22, 2021

2020 journal article

Assessing Lifecycle Value Using Object-Based Modeling by Incorporating Excess and Changeability

JOURNAL OF MECHANICAL DESIGN, 143(5).

By: D. Long n & S. Ferguson n

author keywords: design for X; life cycle analysis and design; product design; systems engineering
TL;DR: The approach borrows from Decision-Based Design and Model Based System Engineering in creating a generic modeling method capable of excess valuation that holistically assesses the value of excess by evaluating both its costs and benefits. (via Semantic Scholar)
Source: Web Of Science
Added: June 10, 2021

2020 journal article

Studying Dynamic Change Probabilities and Their Role in Change Propagation

JOURNAL OF MECHANICAL DESIGN, 142(10).

By: D. Long n & S. Ferguson n

author keywords: excess; changeability?; design theory and methodology; systems design
TL;DR: Results show that excess placement in specific components, and the presence of system hubs (high-degree components), can mitigate the impact of excess consumption when multiple system modifications are made over time. (via Semantic Scholar)
Source: Web Of Science
Added: October 5, 2020

2020 journal article

The Cost-Sorted Distance Method for Identifying Minima Within Firefly Optimization Results: Application to Engineering Design

JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, 21(1).

By: C. Elliott n, S. Ferguson n & G. Buckner n

author keywords: computer aided design; cyber physical system design and operation; multidisciplinary optimization; multiphysics modeling and simulation
TL;DR: The tuned algorithm's efficacy is demonstrated using a class of benchmark problems and a “real world” electromechanical design problem, where the identification of attractive design alternatives can be challenging. (via Semantic Scholar)
Source: Web Of Science
Added: February 8, 2021

2019 review

Design for the Marketing Mix: The Past, Present, and Future of Market-Driven Engineering Design

[Review of ]. JOURNAL OF MECHANICAL DESIGN, 142(6).

By: J. Donndelinger* & S. Ferguson n

author keywords: design for market systems; product design; user-centered design; marketing mix
TL;DR: This paper highlights the advancements of the design community in each of the Ps and shows how the marketing decisions of Place and Promotion extend from the central hub of considering Price in an engineering design problem. (via Semantic Scholar)
Source: Web Of Science
Added: August 31, 2020

2018 journal article

Benefits and challenges of using unmanned aerial systems in the monitoring of electrical distribution systems

The Electricity Journal, 31(2), 26–32.

By: D. Long n, P. Rehm & S. Ferguson n

TL;DR: A study coming from an academic and industry partnership exploring potential uses for UAS in distribution system operation and maintenance, establishing baseline costs and capabilities via equipment field tests, and simulating the cost benefits of increased maintenance. (via Semantic Scholar)
Source: Crossref
Added: December 11, 2020

2017 conference paper

A case study of evolvability and excess on the B-52 stratofortress and FA-18 hornet

Proceedings of the asme international design engineering technical conferences and computers and information in engineering conference, 2017, vol 4.

By: D. Long n & S. Ferguson n

TL;DR: The United States Air Force (USAF) B-52 Stratofortress and the United States Navy (USN) F/A-18 Hornet are evaluated to characterize the changes in desired capabilities and what system attributes allowed them to either successfully adapt or prevented them from adapting to enhance system lifetime value. (via Semantic Scholar)
Source: NC State University Libraries
Added: August 6, 2018

2017 journal article

Design for excess capability to handle uncertain product requirements in a developing world setting

RESEARCH IN ENGINEERING DESIGN, 28(4), 511–527.

By: J. Allen*, C. Mattson*, K. Thacker* & S. Ferguson n

author keywords: Developing world; Excess; Evolvability; Adaptability; Reconfigurability; Reconfigure; System design; Improved cookstove
TL;DR: A sensitivity analysis performed on the system model helps the designer prioritize the set of uncertain requirements and parameters for refinement, and the technique is demonstrated in the design of a cookstove intended for use in the developing world. (via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018

2017 conference paper

Exploring architecture selection and system evolvability

Proceedings of the asme international design engineering technical conferences and computers and information in engineering conference, 2017, vol 2b.

By: S. White n & S. Ferguson n

TL;DR: This paper explores how the architecture choice for a system impacts the ability to evolve and meet future needs. (via Semantic Scholar)
Source: NC State University Libraries
Added: August 6, 2018

2017 journal article

Exploring how optimal composite design is influenced by model fidelity and multiple objectives

COMPOSITE STRUCTURES, 160, 964–975.

By: S. Joglekar n, K. Von Hagel n, M. Pankow n & S. Ferguson n

author keywords: Composite panel design; Multi-objective optimization; Finite element model; Analytic model; Solution seeding
UN Sustainable Development Goal Categories
Source: Web Of Science
Added: August 6, 2018

2016 conference paper

Bubble tracking simulations of turbulent two-phase flows

Proceedings of the asme fluids engineering division summer meeting, 2016, vol 1b.

Source: NC State University Libraries
Added: August 6, 2018

2016 conference paper

Design optimization and analysis of a prescribed vibration system

Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2016, Vol 2b, 353–360.

By: B. Malinga n, S. Ferguson n & G. Buckner n

UN Sustainable Development Goal Categories
16. Peace, Justice and Strong Institutions (OpenAlex)
Source: NC State University Libraries
Added: August 6, 2018

2016 journal article

Evaluation of System Evolvability Based on Usable Excess

JOURNAL OF MECHANICAL DESIGN, 138(9).

By: J. Allen*, C. Mattson* & S. Ferguson n

author keywords: evolvability; evolve; reconfigurability; reconfigure; system design; automated assembly line; excess; complex engineered systems
TL;DR: It is shown that system evolvability can be modeled as a function of usable excess, and an equation for the usability of excess is improved to include the attributes of type, location, and form as well as quantity. (via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018

2016 journal article

Excess Identification and Mapping in Engineered Systems

JOURNAL OF MECHANICAL DESIGN, 138(8).

By: E. Cansler n, S. White n, S. Ferguson n & C. Mattson*

Source: Web Of Science
Added: August 6, 2018

2016 journal article

Modeling, construction and experimental validation of actuated rolling dynamics of the cylindrical Transforming Roving-Rolling Explorer (TRREx)

Acta Astronautica, 132, 43–53.

By: L. Edwin n, A. Mazzoleni n, T. Gemmer n & S. Ferguson n

UN Sustainable Development Goal Categories
Source: Crossref
Added: February 24, 2020

2016 journal article

Optimization of excess system capability for increased evolvability

Structural and Multidisciplinary Optimization, 53(6), 1277–1294.

By: J. Watson*, J. Allen*, C. Mattson* & S. Ferguson n

author keywords: Evolvability; Reconfigurability; Flexibility; Excess; Complex systems; Multi-objective optimization
TL;DR: This paper introduces a process for optimizing the amount of excess capability in a complex system and results in a set of evolvable systems without excessive cost, and demonstrates how this process can be used to select the amountof excess capability that should be included in a military ground vehicle. (via Semantic Scholar)
Source: Crossref
Added: December 11, 2020

2016 journal article

Performance and Design Comparison of a Bulk Thermoelectric Cooler With a Hybrid Architecture

Journal of Thermal Science and Engineering Applications, 8(2).

By: M. Antonik n, B. O'Connor n & S. Ferguson n

UN Sustainable Development Goal Categories
Sources: Web Of Science, Crossref
Added: August 6, 2018

2015 conference paper

Exploring the relationship between excess and system evolutions using a stress-test

International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2015, vol 7.

By: E. Cansler n, S. Ferguson n & C. Mattson*

Source: NC State University Libraries
Added: August 6, 2018

2015 journal article

Heat shrink formation of a corrugated thin film thermoelectric generator

ENERGY CONVERSION AND MANAGEMENT, 103, 674–680.

By: T. Sun n, J. Peavey*, M. Shelby*, S. Ferguson n & . Brendan T. O'Connor

author keywords: Thermoelectric generator; Thin film; In-plane heat transfer; Corrugated architecture
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (Web of Science; OpenAlex)
Source: Web Of Science
Added: August 6, 2018

2015 conference paper

Modeling noncompensatory choices with a compensatory model for a product design search

International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2015, vol 2A.

By: J. Shin n & S. Ferguson n

TL;DR: Results from using compensatory models show that noncompensatory choices can lead to distinct segments with extreme part-worths, and the product design search problem suggests that the compensatory model would be preferred due to small design errors and inexpensive computational burden. (via Semantic Scholar)
Source: NC State University Libraries
Added: August 6, 2018

2015 journal article

Navigating redesign and market desirability implications when considering increased product variety

JOURNAL OF ENGINEERING DESIGN, 26(7-9), 236–258.

By: A. Belt n, K. Von Hagel n & S. Ferguson n

author keywords: product redesign; discrete choice theory; Change Prediction Method; product feature determination
Source: Web Of Science
Added: August 6, 2018

2015 journal article

New perspectives on design automation: Celebrating the 40th anniversary of the ASME design automation conference

Journal of Mechanical Design (New York, N.Y. : 1990), 137(5).

By: H. Ilies, M. Parkinson, C. Seepersad, M. Kokkolaras, K. Ragsdell, P. Papalambros, F. Mistree, C. Williams ...

TL;DR: A 40th anniversary symposium at the 2014 ASME International Design Engineering Technical Conferences (IDETC) with a series of six lightning talks from early career members of the DAC community offering their vision of emerging research opportunities in DA. (via Semantic Scholar)
Source: NC State University Libraries
Added: August 6, 2018

2015 journal article

Performance analysis of a thermoelectric cooler with a corrugated architecture

APPLIED ENERGY, 147, 184–191.

By: O. Owoyele n, S. Ferguson n & . Brendan T. O'Connor n

author keywords: Thermoelectric; TEC; Thin-film; Cooling; Heat sink; Design optimization
UN Sustainable Development Goal Categories
Source: Web Of Science
Added: August 6, 2018

2015 conference paper

Performance comparison of a bulk thermoelectric cooler with a hybrid device architecture

International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2015, vol 2b.

By: M. Antonik n, S. Ferguson n & B. O'Connor n

Source: NC State University Libraries
Added: August 6, 2018

2015 conference paper

Simulating variability of rework cost and market performance estimates in product redesign

International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2015, vol 2A.

By: K. Von Hagel n & S. Ferguson n

Source: NC State University Libraries
Added: August 6, 2018

2015 conference paper

Top down design using Bayesian network classifiers for composite panels

Proceedings of the American Society for Composites: Thirtieth Technical Conference, 468–475.

By: K. Von Hagel, S. Joglekar, S. Ferguson & M. Pankow

Source: NC State University Libraries
Added: August 6, 2018

2014 journal article

A Model for Quantifying System Evolvability Based on Excess and Capacity

JOURNAL OF MECHANICAL DESIGN, 136(5).

By: M. Tackett*, C. Mattson* & S. Ferguson n

author keywords: reconfigurability; flexibility; adaptability; transformation; evolvability; service-phase evolution; system changes; system space
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: Web Of Science
Added: August 6, 2018

2014 journal article

Creating targeted initial populations for genetic product searches in heterogeneous markets

ENGINEERING OPTIMIZATION, 46(12), 1729–1747.

By: G. Foster n, C. Turner n, S. Ferguson n & J. Donndelinger*

author keywords: genetic search; market-based product design; product line optimization; mixed-integer optimization
TL;DR: This article draws on research advances in market-based product design and heuristic optimization to strategically construct ‘targeted’ initial populations, creating designs that lead to computational savings and product configurations with improved market share of preferences. (via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018

2014 journal article

Multi-Objective Design Optimization of a Variable Geometry Spray Fuel Injector

JOURNAL OF MECHANICAL DESIGN, 136(4).

By: J. Archer n, T. Fang n, S. Ferguson n & G. Buckner n

Contributors: J. Archer n, T. Fang n, S. Ferguson n & G. Buckner n

TL;DR: This paper explores the simulation-based design optimization of a variable geometry spray (VGS) fuel injector using a multi-objective genetic algorithm interfaced with commercial computational fluid dynamics software and high performance computing capabilities to evaluate the spray characteristics of each VGS candidate design. (via Semantic Scholar)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018

2014 journal article

Performance Analysis and Technical Feasibility Assessment of a Transforming Roving-Rolling Explorer Rover for Mars Exploration

JOURNAL OF MECHANICAL DESIGN, 136(7).

By: L. Edwin n, J. Denhart n, T. Gemmer n, S. Ferguson n & A. Mazzoleni n

Source: Web Of Science
Added: August 6, 2018

2013 conference paper

A concept selection framework for early sorting of reconfigurable system designs

Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2013, vol 3B.

By: J. Denhart n, T. Gemmer n, S. Ferguson n & A. Mazzoleni n

TL;DR: A seven-step framework for sorting proposed concepts of system changes / reconfigurations is presented that seeks to characterize the overall ramifications on system architecture. (via Semantic Scholar)
Source: NC State University Libraries
Added: August 6, 2018

2013 review

A review of mass customization across marketing, engineering and distribution domains toward development of a process framework

[Review of ]. RESEARCH IN ENGINEERING DESIGN, 25(1), 11–30.

By: S. Ferguson n, A. Olewnik* & P. Cormier*

author keywords: Mass customization; Collaborative design; Design process; Marketing; Engineering; Distribution; Product platforms; Product families; Reconfigurable design; Discrete choice
Source: Web Of Science
Added: August 6, 2018

2013 conference paper

Effects of feedback on design space exploration

Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2013, vol 1.

By: G. Foster n, J. Denhart n & S. Ferguson n

TL;DR: This paper investigates two feedback elements for their ability to enhance students’ understanding of the tradeoffs inherent in a water rocket propulsion design problem: a Latin hypercube sample that allows the student to select a starting point and sensitivity values that displayed local gradient information. (via Semantic Scholar)
Source: NC State University Libraries
Added: August 6, 2018

2013 conference paper

Enhanced targeted initial populations for multiobjective product line optimization

Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2013, vol 3A.

By: G. Foster n & S. Ferguson n

TL;DR: The creation of targeted initial populations for genetic algorithms is extended to multiobjective product line design problems by using the objectives of the problem, instead of product level utility, to identify candidate designs. (via Semantic Scholar)
Source: NC State University Libraries
Added: August 6, 2018

2013 journal article

Exploring the Effectiveness of Using Graveyard Data When Generating Design Alternatives

JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, 13(4).

By: G. Foster* & S. Ferguson n

author keywords: design alternatives; multiobjective optimization; multiobjective genetic algorithms; design space exploration; MGA
TL;DR: Results from these studies indicate that using graveyard data allows for the discovery of alternative designs that are at least 70% as unique as alternatives found using an optimization-based alternative identification approach, while saving a significant number of functional evaluations. (via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018

2013 conference paper

Using a goal-switching selection operator in multi-objective genetic algorithm optimization problems

Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2013, vol 3B.

By: D. Shaefer n & S. Ferguson n

TL;DR: Results show that goal switching improves the number of Pareto frontier points found and can also lead to improvements in hypervolume and/or mean time to convergence. (via Semantic Scholar)
Source: NC State University Libraries
Added: August 6, 2018

2012 conference paper

The creation of design modules for use in engineering design education

Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol 7, 23–36.

By: G. Foster n, M. Holland n, S. Ferguson n & W. Deluca n

TL;DR: The investigators hypothesize that the use of computational modules would eliminate the repetitive analysis barrier in design problems, thus allowing for design-related experiences to be included earlier in the curricula as opposed to postponing it to a capstone experience. (via Semantic Scholar)
Source: NC State University Libraries
Added: August 6, 2018

2011 conference paper

Assessing the effectiveness of using graveyard data for generating design alternatives

Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2011, vol 5, pts A and B, 563–576.

By: G. Foster n & S. Ferguson n

TL;DR: Results from this work show the graveyard can be used as a way of inexpensively generating alternatives that are close to ideal, especially nearer to the starting design, and it is demonstrated that graveyard information can beused to increase the performance of the Nelder-Mead simplex method when searching for alternative designs. (via Semantic Scholar)
Source: NC State University Libraries
Added: August 6, 2018

2011 conference paper

Exploring differences in preference heterogeneity representation and their influence in product family design

Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2011, vol 5, pts A and B, 81–92.

By: E. Sullivan n, S. Ferguson n & J. Donndelinger*

Source: NC State University Libraries
Added: August 6, 2018

2011 conference paper

Exploring heterogeneity of customer preference to balance commonality and market coverage

Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2011, vol 5, pts A and B, 67–79.

By: C. Turner n, S. Ferguson n & J. Donndelinger*

Source: NC State University Libraries
Added: August 6, 2018

2011 conference paper

Exploring marketing to engineering information mapping in mass customization: A presentation of ideas, challenges and resulting questions

Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2011, vol 5, pts A and B, 609–623.

By: S. Ferguson n, A. Olewnik* & P. Cormier*

Source: NC State University Libraries
Added: August 6, 2018

2009 conference paper

Development of a changeable airfoil optimization model for use in the multidisciplinary design of unmanned aerial vehicles

Proceedings of the ASME international design engineering technical conferences and computers and information in engineering conference, vol 5, pts a and b - 35th design automation conference, 57–68.

By: S. Ferguson n, A. Tilstra*, C. Seepersad* & K. Wood*

TL;DR: The research presented in this paper uses multidisciplinary optimization (MDO) and changeable systems methods together in the design of a reconfigurable Unmanned Aerial Vehicle (UAV) by developing a changeable airfoil subsystem. (via Semantic Scholar)
Source: NC State University Libraries
Added: August 6, 2018

2008 article

Designing a family of reconfigurable vehicles using multilevel multidisciplinary design optimization

Ferguson, S., Kasprzak, E., & Lewis, K. (2009, August). STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, Vol. 39, pp. 171–186.

By: S. Ferguson n, E. Kasprzak* & K. Lewis*

author keywords: Reconfigurable systems; Product family design; Multilevel optimization; Vehicle Design
TL;DR: The results of this study demonstrate the effectiveness of combining reconfigurability with product platforming and MDO, resulting in lap-time performance increases of 2.08%, 3.27%, and 3.67% when compared to the static, optimized baseline vehicle. (via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.