Stefan Seelecke Riede, T., York, A., Furst, S., Mueller, R., & Seelecke, S. (2011). Elasticity and stress relaxation of a very small vocal fold. JOURNAL OF BIOMECHANICS, 44(10), 1936–1940. https://doi.org/10.1016/j.jbiomech.2011.04.024 Lynch, C., Brei, D., Chaplya, P., Ounaies, Z., Kamlah, M., Seelecke, S., … Weiland, L. (2010). Adaptive and active materials: Selected papers from the ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 09) (Oxnard, CA, USA, 21-23 September 2009). Smart Materials & Structures, 19(9). Hangekar, R., Furst, S., & Seelecke, S. (2010). Development of a 6-channel power controller for simultaneous actuation and resistance measurement of SMA wires. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol 2, 461–470. https://doi.org/10.1115/smasis2010-3846 Furst, S. J., Hangekar, R., & Seelecke, S. (2010). Development, Assembly, and Validation of an SMA-Actuated 2-Joint Nozzle and 6-Channel Power Supply for Use in a Smart Inhaler System. ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2010, PTS 1 AND 2, Vol. 7643. https://doi.org/10.1117/12.853399 Hodgins, M., York, A., & Seelecke, S. (2010). Electro-mechanical analysis of a deap actuator coupled to a negative-rate bias spring mechanism. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol. 1, 315–322. https://doi.org/10.1115/smasis2010-3849 York, A., Dunn, J., & Seelecke, S. (2010, September). Experimental characterization of the hysteretic and rate-dependent electromechanical behavior of dielectric electro-active polymer actuators. SMART MATERIALS & STRUCTURES, Vol. 19. https://doi.org/10.1088/0964-1726/19/9/094014 Hodgins, M., & Seelecke, S. (2010). Mechanical behavior of a bi-stable negative-rate bias spring system. Behavior and mechanics of multifunctional materials and composites 2010, 7644. Furst, S. J., Hangekar, R., & Seelecke, S. (2010). Practical implementation of resistance feedback measurement for position control of a flexible smart inhaler nozzle. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol 2, 205–213. https://doi.org/10.1115/smasis2010-3840 York, A., & Seelecke, S. (2010). Towards self-sensing of deap actuators: Capacitive sensing experimental analysis. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol. 1, 307–314. https://doi.org/10.1115/smasis2010-3847 York, A., Hodgins, M., & Seelecke, S. (2009). Electro-mechanical analysis of a biased dielectric EAP actuator. SMASIS 2009, vol 1, 289–297. https://doi.org/10.1115/smasis2009-1441 Yang, S., & Seelecke, S. (2009, October). FE analysis of SMA-based bio-inspired bone-joint system. SMART MATERIALS & STRUCTURES, Vol. 18. https://doi.org/10.1088/0964-1726/18/10/104020 Furst, S. J., Bumgarner, D., & Seelecke, S. (2009). Quantification of the effectiveness of various conductive and non-conductive epoxies as an attachment method for small SMA wires. SMASIS 2009, vol 2, 409–418. https://doi.org/10.1115/smasis2009-1450 Heintze, O., & Seelecke, S. (2008). A coupled thermomechanical model for shape memory alloys - From single crystal to polycrystal. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 481, 389–394. Morrison, P., Seelecke, S., Krevet, B., & Kohl, M. (2008). A free energy model for magneto-mechanically coupled NiMnGa single crystals. EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS, 158, 213–220. https://doi.org/10.1140/epjst/e2008-00678-x Kleinstreuer, C., Li, Z., Basciano, C. A., Seelecke, S., & Farber, M. A. (2008). Computational mechanics of Nitinol stent grafts. JOURNAL OF BIOMECHANICS, 41(11), 2370–2378. https://doi.org/10.1016/j.jbiomech.2008.05.032 Krevet, B., Kohl, M., Morrison, P., & Seelecke, S. (2008). Magnetization- and strain-dependent free energy model for FEM simulation of magnetic shape memory alloys. EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS, 158, 205–211. https://doi.org/10.1140/epjst/e2008-00677-y Ball, B. L., Smith, R. C., Kim, S.-J., & Seelecke, S. (2007). A stress-dependent hysteresis model for ferroelectric materials. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 18(1), 69–88. https://doi.org/10.1177/1045389X07070937 Davis, B., Turner, T. L., & Seelecke, S. (2008). Measurement and prediction of the thermomechanical response of shape memory alloy hybrid composite beams. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 19(2), 129–143. https://doi.org/10.1177/1045389X06073172 Kim, S.-J., & Seelecke, S. (2007). A rate-dependent three-dimensional free energy model for ferroelectric single crystals. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 44(3-4), 1196–1209. https://doi.org/10.1016/j.ijsolstr.2006.06.007 Seelecke, S., Kim, S. J., Ball, B. L., & Smith, R. C. (2005). A rate-dependent two-dimensional free energy model for ferroelectric single crystals. CONTINUUM MECHANICS AND THERMODYNAMICS, 17(4), 337–350. https://doi.org/10.1007/s00161-005-0207-7 Smith, R. C., Seelecke, S., Dapino, M., & Ounaies, Z. (2006). A unified framework for modeling hysteresis in ferroic materials. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 54(1), 46–85. https://doi.org/10.1016/j.jmps.2005.08.006 Smith, R. C., Seelecke, S., Ounaies, Z., & Smith, J. (2003). A Free Energy Model for Hysteresis in Ferroelectric Materials. Journal of Intelligent Material Systems and Structures, 14(11), 719–739. https://doi.org/10.1177/1045389X03038841 Vortmann, C., Schnerr, G. H., & Seelecke, S. (2003). Thermodynamic modeling and simulation of cavitating nozzle flow. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 24(5), 774–783. https://doi.org/10.1016/S0142-727X(03)00003-1 Smith, R. C., Dapino, M. J., & Seelecke, S. (2003). Free energy model for hysteresis in magnetostrictive transducers. JOURNAL OF APPLIED PHYSICS, 93(1), 458–466. https://doi.org/10.1063/1.1524312 Seelecke, S. (2002). Modeling the dynamic behavior of shape memory alloys. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 37(8), 1363–1374. https://doi.org/10.1016/S0020-7462(02)00030-6