Venkata Bhuvaneswari Vukkum Vukkum, V. B., Ansell, T. Y., Nieto, A., & Gupta, R. K. (2024). Intergranular Corrosion of CNT-Reinforced and Laser Powder Bed Fusion-Printed 316L Stainless Steel. JOM, 76(1), 232–237. https://doi.org/10.1007/s11837-023-06165-y Christudasjustus, J., Vukkum, V. B., & Gupta, R. K. (2023). Evolution of surface film in AA2024-T3 after a long-term immersion in NaCl solution. CORROSION SCIENCE, 215. https://doi.org/10.1016/j.corsci.2023.111056 Vukkum, V. B., Christudasjustus, J., Ansell, T. Y., Nieto, A., & Gupta, R. K. (2023). Influence of carbon nanotubes on microstructure and corrosion performance of additively manufactured 316L stainless steel. Corrosion Science. https://doi.org/10.1016/j.corsci.2023.111494 Vukkum, V. B., Ansell, T. Y., Nieto, A., & Gupta, R. K. (2023, October 4). Intergranular Corrosion of CNT-Reinforced and Laser Powder Bed Fusion-Printed 316L Stainless Steel. JOM, Vol. 10. https://doi.org/10.1007/s11837-023-06165 Vukkum, V. B., Delvecchio, E., Christudasjustus, J., Storck, S., & Gupta, R. K. (2023). Intergranular Corrosion of Feedstock Modified-Additively Manufactured Stainless Steel After Sensitization. CORROSION, 79(6), 624–636. https://doi.org/10.5006/4245 Vukkum, V. B., Ray, T., Karmakar, A., & Das, S. (2023, February 21). Microstructure-Texture-Mechanical Property Correlation in Laser-Welded Dual-Phase and Interstitial-Free Steel Blanks. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 2. https://doi.org/10.1007/s11665-023-07959-6 Christudasjustus, J., Witharamage, C. S., Vukkum, V. B., Walunj, G., Borkar, T., & Gupta, R. K. (2023). Surface Film Formation on Al-V Alloys with Far-From-Equilibrium Microstructure. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 170(3). https://doi.org/10.1149/1945-7111/acc7ce Nieto, A., Vukkum, V. B., Jalagam, P., Nema, K., Budan, J., Gupta, R. K., & Ansell, T. Y. (2022, August 10). 3D printed carbon nanotube reinforced stainless steel via selective lase melting. MRS COMMUNICATIONS, Vol. 8. https://doi.org/10.1557/s43579-022-00200-w Vukkum, V. B., Ozdemir, F., Storck, S., & Gupta, R. K. (2022). Corrosion performance of feedstock modified - Additively manufactured stainless steel. CORROSION SCIENCE, 209. https://doi.org/10.1016/j.corsci.2022.110724 Vukkum, V. B., Christudasjustus, J., Darwish, A. A., Storck, S. M., & Gupta, R. K. (2022). Enhanced corrosion resistance of additively manufactured stainless steel by modification of feedstock. NPJ MATERIALS DEGRADATION, 6(1). https://doi.org/10.1038/s41529-021-00215-z Ozdemir, F., Christudasjustus, J., Vukkum, V. B., Okuyucu, H., & Gupta, R. K. (2022, September 8). Need of an Inert Atmosphere for High-Energy Ball Milling of Al Alloys. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 9. https://doi.org/10.1007/s11665-022-07309-y Vukkum, V. B., & Gupta, R. K. (2022). [Review of Review on corrosion performance of laser powder-bed fusion printed 316L stainless steel: Effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure]. MATERIALS & DESIGN, 221. https://doi.org/10.1016/j.matdes.2022.110874