Xiaomeng Fang

3D-Printed Hydrogel Filter for Biocatalytic CO₂ Capture

Zhang, S., Shen, J., Zhang, P., Schroeder, T. B. H., Chen, J., Carnevale, C., … Fang, X. (2024, July 22). ADVANCED MATERIALS TECHNOLOGIES, Vol. 7.

Effects of incident solar radiation on evaporative heat loss through firefighter turnout composites incorporating microporous and bi-component type moisture barrier components

Gao, H., Deaton, A. S., Barker, R. L., DenHartog, E., & Fang, X. (2024, February 14). JOURNAL OF THE TEXTILE INSTITUTE, Vol. 2.

TiO₂-Coated Meltblown Nonwoven Fabrics Prepared via Atomic Layer Deposition for the Inactivation of <i>E</i>.<i> coli</i> as a Model Photocatalytic Drinking Water Treatment System

ENVIRONMENTS, 11(5).

Carbonic Anhydrase Enhanced UV-Crosslinked PEG-DA/PEO Extruded Hydrogel Flexible Filaments and Durable Grids for CO2 Capture

GELS, 9(4).

Development of a Pneumatic-Driven Fiber-Shaped Robot Scaffold for Use as a Complex 3D Dynamic Culture System

BIOMIMETICS, 8(2).

Effect of Material Properties on Fiber-Shaped Pneumatic Actuators Performance

ACTUATORS, 12(3).

Frequency Characteristics of High Strain Rate Compressions of C_f-MWCNTs/SiC Composites

CERAMICS-SWITZERLAND, 6(4), 1991–2007.

Use of Meltblown Nonwoven Fabric Filter for Stormwater Runoff Treatment

WATER, 15(2).

Advances in 3D Gel Printing for Enzyme Immobilization

[Review of ]. GELS, 8(8).

Effects of Air Gaps on Heat Loss through Firefighter Turnout Composites with Different Moisture Barrier Components

Gao, H., Deaton, A. S., Barker, R., DenHartog, E., & Fang, X. (2022, October 7). FIBERS AND POLYMERS, Vol. 10.

Effects of Outer Shell Fabric Color, Smoke Contamination, and Washing on Heat Loss through Turnout Suit Systems

Textile Research Journal, 92(11-12), 1909–1922.

Effects of the moisture barrier and thermal liner components on the heat strain and thermal protective performance of firefighter turnout systems

Gao, H., Deaton, A. S., Barker, R., Fang, X., & Watson, K. (2022, May 23). TEXTILE RESEARCH JOURNAL, Vol. 5.

Relationship between heat loss indexes and physiological indicators of turnout-related heat strain in mild and hot environments

Gao, H., Deaton, A. S., Barker, R., Fang, X., & Watson, K. (2022, April 29). INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS, Vol. 3.

Effects of environmental temperature and humidity on evaporative heat loss through firefighter suit materials made with semi-permeable and microporous moisture barriers

Textile Research Journal, 92(1-2), 219–231.

Identifying factors that contribute to structural firefighter heat strain in North America

International Journal of Occupational Safety and Ergonomics, 28(4), 2183–2192.

Effects of Total Heat Loss versus Evaporative Resistance of Firefighter Garments in a Physiological Heat Strain Trial

Fiber-Based Sensors and Actuators

In J. Hu, B. Kumar, & J. Lu (Eds.), Handbook of Fibrous Materials (pp. 681–720).

Hybrid Carbon Nanotube Fabrics with Sacrificial Nanofibers for Flexible High Performance Lithium-Ion Battery Anodes

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 166(4), A473–A479.

High strain rate compressive response of the C-f/SiC composite

CERAMICS INTERNATIONAL, 45(6), 6812–6818.

Anisotropic D-EAP Electrodes and their Application in Spring Roll Actuators

(Ph.D. thesis). North Carolina State University, Raleigh, NC.

Enhanced anisotropic response of dielectric elastomer actuators with microcombed and etched carbon nanotube sheet electrodes

CARBON, 120, 366–373.

Nanoscale considerations responsible for diverse macroscopic phase behavior in monosubstituted isobutyl-POSS/poly(ethylene oxide) blends

SOFT MATTER, 13(46), 8672–8677.

Carbon nanotube sheet electrodes for anisotropic actuation of dielectric elastomers

CARBON, 89, 113–120.

Comparison of the behavior of PEG-POSS stars with unlinked POSS in PEO films and fibers

Abstracts of Papers of The American Chemical Society, 250.

Crystallization Behaviors of Modified Poly(ethylene terephthalate) and Their Self-nucleation Ability

MACROMOLECULAR MATERIALS AND ENGINEERING, 300(4), 403–413.

Flexible binder-free silicon/silica/carbon nanofiber composites as anode for lithium-ion batteries

ELECTROCHIMICA ACTA, 169, 52–60.

Comparison of the Mechanical Properties between 2D and 3D Orthogonal Woven Ramie Fiber Reinforced Polypropylene Composites

Polymers and Polymer Composites, 22(2), 187–192.

Lif Demetlerindeki Yoğunluk Farklarının Hava ve Ses İzolayonu Üzerine Etkisinin İncelenmesi

Electronic Journal of Vehicle Technologies / Tasit Teknolojileri Elektronik Dergisi., 8(2), 19–29.

3D orthogonal woven ramie fiber reinforced polypropylene composites

2011 International Symposium on Sustainable Composites (ISSC) 4th China-Japan Joint Seminar on Green Composites.

Light-Weighting Design of Eco-Power Automobile Chassis Made from Green Composite and its Topology Optimization in FEA

Advanced Materials Research, 341-342, 183–188.

Comparison of the Mechanical Properties Between 2D and 3D Orthogonal Woven Ramie Fiber Reinforced Polypropylene Composites

The 6th International Symposium for Materials & Kansei in Textile Fashion.