Yusef Fahmy

Jernigan, S. R., Fahmy, Y., & Buckner, G. D. (2009). Implementing a Remote Laboratory Experience Into a Joint Engineering Degree Program: Aerodynamic Levitation of a Beach Ball. IEEE TRANSACTIONS ON EDUCATION, 52(2), 205–213. https://doi.org/10.1109/TE.2008.924217

Fahmy, Y., & Conrad, H. (2001). Electrosintering of iron powder compacts. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 32(3A), 811–819. https://doi.org/10.1007/s11661-001-0097-7

Wiebe, E. N., Hare, T. M., Carter, M., Fahmy, Y., Russell, R., & Ferzli, M. (2001). Supporting lab report writing in an introductory materials engineering lab. 2001 ASEE annual conference & exposition: Proceedings ; June 24-27, 2001, Albuquerque Convention Center, Albuquerque, New Mexico. Washington, DC: ASEE.

Boissy, C., Wu, C. W., Fahmy, Y., & Conrad, H. (1999, June 30). Experimental study of the yield stress of electrorheological suspensions under AC field: Comparison with a theoretical model. INTERNATIONAL JOURNAL OF MODERN PHYSICS B, Vol. 13, pp. 1775–1782. https://doi.org/10.1142/s0217979299001788

Campbell, J., Fahmy, Y., & Conrad, H. (1999). Influence of an electric field on the plastic deformation of fine-grained Al2O3. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 30(11), 2817–2823. https://doi.org/10.1007/s11661-999-0119-4

Conrad, H., Guo, Z., Fahmy, Y., & Yang, D. (1999, September). Influence of microstructure size on the plastic deformation kinetics, fatigue crack growth rate, and low-cycle fatigue of solder joints. JOURNAL OF ELECTRONIC MATERIALS, Vol. 28, pp. 1062–1070. https://doi.org/10.1007/s11664-999-0184-x

Campbell, J., Fahmy, Y., & Conrad, H. (1999). Plastic deformation kinetics of fine-grained alumina. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 30(11), 2809–2816. https://doi.org/10.1007/s11661-999-0118-5

Fahmy, Y., Shen, T. D., Tucker, D. A., Spontak, R. L., & Koch, C. C. (1999). Possible evidence for the stabilization of beta-carbon nitride by high-energy ball milling. JOURNAL OF MATERIALS RESEARCH, 14(6), 2488–2499. https://doi.org/10.1557/JMR.1999.0334

Fahmy, Y., Hare, T., Tooke, R., & Conrad, H. (1998). Effects of a pulsed magnetic treatment on the fatigue of low carbon steel. SCRIPTA MATERIALIA, 38(9), 1355–1358. https://doi.org/10.1016/S1359-6462(98)00046-3

Hacke, P. L., Fahmy, Y., & Conrad, H. (1998). Phase coarsening and crack growth rate during thermo-mechanical cycling of 63Sn37Pb solder joints. JOURNAL OF ELECTRONIC MATERIALS, 27(8), 941–947. https://doi.org/10.1007/s11664-998-0125-0

Shen, T. D., Shmagin, I., Koch, C. C., Kolbas, R. M., Fahmy, Y., Bergman, L., … Quan, M. X. (1997). Photoluminescence from mechanically milled Si and SiO2 powders. PHYSICAL REVIEW B, 55(12), 7615–7623. https://doi.org/10.1103/physrevb.55.7615