Yasir Nawab

An eco-friendly hydroentangled cotton non-woven membrane with alginate hydrogel for water filtration. (2024). International Journal of Biological Macromolecules. https://doi.org/10.1016/J.IJBIOMAC.2023.128422

Zulfiqar, A., Manzoor, T., Ijaz, M. B., Nawaz, H. H., Ahmad, F., Akhtar, S., … Umar, M. (2024). Artificial-Neural-Network-Based Predicted Model for Seam Strength of Five-Pocket Denim Jeans: A Review. Textiles. https://doi.org/10.3390/textiles4020012

Effect of gradual thermoforming pressure on the mechanical properties of jute/polypropylene commingled composites. (2024). Journal of Composite Materials. https://doi.org/10.1177/00219983231226432

Impact of weave architecture on the mechanical performance of carbon-aramid/PVB hybrid composites. (2024). Journal of Engineered Fibers and Fabrics. https://doi.org/10.1177/15589250241230767

A Fibrous Nonwoven Hydrogel Composite for Shoe Insole with Enhanced Mechanical and Comfort Properties. (2023). Journal of Polymers and the Environment. https://doi.org/10.1007/S10924-023-02980-1

A Novel Composite of Hemp Fiber and Alginate Hydrogel for Wound Dressings. (2023). Journal of Polymers and the Environment. https://doi.org/10.1007/S10924-023-02756-7

Siddique, A., Iqbal, Z., Nawab, Y., & Shaker, K. (2023). A review of joining techniques for thermoplastic composite materials. Journal of Thermoplastic Composite Materials. https://doi.org/10.1177/08927057221096662

Bio-based thermal insulating panels for clothing using domestic parakeet feathers as filling: a comparative study. (2023). Biomass Conversion and Biorefinery. https://doi.org/10.1007/S13399-023-05150-4

Circularity in Materials: A Review on Polymer Composites Made from Agriculture and Textile Waste. (2023). International Journal of Polymer Science. https://doi.org/10.1155/2023/5872605

Delamination Characteristics of Aluminum-Composite Bonds: Impact of Reinforcements and Matrices. (2023). International Journal of Polymer Science. https://doi.org/10.1155/2023/6020509

Jamal, H., Ahmad, F., Azam, F., Umair, M., Ahmad, S., Nawab, Y., … Ullah, T. (2023). Development and characterization of impact resistant fabric with better comfort for motorbike riders. Journal of the Textile Institute. https://doi.org/10.1080/00405000.2022.2093080

Effect of Cellulosic Material and Weave Design on Comfort Performance of Woven Fabrics. (2023). Journal of Natural Fibers. https://doi.org/10.1080/15440478.2022.2163030

Nasreen, A., Bangash, M. K., Shaker, K., & YNawab. (2023). Effect of Surface Treatment on Stiffness and Damping Behavior of Metal-Metal and Composite-Metal Adhesive Joints. Polymers. https://doi.org/10.3390/polym15020435

Effect of fillers and weave architecture hybridization on the impact performance of 3D woven hybrid green composites. (2023). Polymer Composites. https://doi.org/10.1002/PC.27889

Influence of tetrahedral architectures on fluid transmission and heat retention behaviors of auxetic weaves. (2023). Thermal Science and Engineering Progress. https://doi.org/10.1016/J.TSEP.2023.101946

Khan, M. I., Umair, M., Hussain, R., Karahan, M., & Nawab, Y. (2023). Investigation of impact properties of para-aramid composites made with a thermoplastic-thermoset blend. Journal of Thermoplastic Composite Materials. https://doi.org/10.1177/08927057211021464

Shaker, K., Adnan, M., YNawab, Umair, M., Jabbar, M., siddique, & Ahmad, A. (2023). Mechanical Performance of Glass/Epoxy Composites Loaded with Silane-Treated Aluminum Hydroxide Fillers. Polymers. https://doi.org/10.3390/polym15173514

Optimization of percolation limit of carbon black for electromagnetic interference shielding. (2023). Journal of Magnetism and Magnetic Materials. https://doi.org/10.1016/J.JMMM.2023.171164

Optimization of the novel jute retting process to enhance the fiber quality for textile applications. (2023). Heliyon. https://doi.org/10.1016/J.HELIYON.2023.E21513

Recent Developments in Materials and Manufacturing Techniques Used for Sports Textiles. (2023). International Journal of Polymer Science. https://doi.org/10.1155/2023/2021622

Recent advances in electromagnetic interference (EMI) shielding textiles: A comprehensive review. (2023). Synthetic Metals. https://doi.org/10.1016/J.SYNTHMET.2023.117305

Recent progress in thermal and acoustic properties of natural fiber reinforced polymer composites: Preparation, characterization, and data analysis. (2023). Polymer Composites. https://doi.org/10.1002/PC.27633

Scaling thermal and mechanical characteristics of woven honeycombs: A novel endeavor of simultaneous ridges and picking sequence variation. (2023). International Journal of Thermal Sciences. https://doi.org/10.1016/J.IJTHERMALSCI.2023.108574

Shape distortion in composites: sources, characterization, and remedies. (2023). Mehran University Research Journal of Engineering and Technology. https://doi.org/10.22581/MUET1982.2303.012023

Study of fibre to fibre and ply to ply comingling technique for fabrication of natural fibre reinforced thermoplastic composites. (2023). Journal of the Textile Institute. https://doi.org/10.1080/00405000.2023.2282219

Arfa, U., Alshareef, M., Nadeem, N., JAVID, A. M. J. E. D., YNawab, Alshammari, K. F., & ZUBAIR, U. S. M. A. N. (2023). Sunlight-Driven Photocatalytic Active Fabrics through Immobilization of Functionalized Doped Titania Nanoparticles. Polymers. https://doi.org/10.3390/polym15132775

A Review of the Fabrication Methods, Testing, and Performance of Face Masks. (2022). International Journal of Polymer Science. https://doi.org/10.1155/2022/2161869

Awais, H., Ahmad, F., Azam, F., Shahid, S., Nawab, Y., & Ahmad, S. (2022). An economical and environmentally benign approach to extract banana fibres from agricultural waste for fibre reinforced composites. Journal of the Textile Institute. https://doi.org/10.1080/00405000.2021.1957293

Shaker, K., & Nawab, Y. (2022). Bast and Grass Fibers. In SpringerBriefs in Materials (pp. 33–44). https://doi.org/10.1007/978-3-030-97413-8_4

Shaker, K., Umair, M., Shahid, S., Jabbar, M., Ullah Khan, R. M. W., Zeeshan, M., & Nawab, Y. (2022). Cellulosic Fillers Extracted from Argyreia Speciose Waste: A Potential Reinforcement for Composites to Enhance Properties. Journal of Natural Fibers. https://doi.org/10.1080/15440478.2020.1856271

Damage-Tolerant Woven Glass Fiber Composites Developed Using Polyvinyl Butyral (PVB) Unsaturated Polyester (UP) Blends. (2022). Advances in Materials Science and Engineering. https://doi.org/10.1155/2022/9077788

Uz Zaman, S., Shahid, S., Shaker, K., Nawab, Y., Ahmad, S., Umair, M., … Azam, F. (2022). Development and characterization of chemical and fire resistant jute/unsaturated polyester composites. Journal of the Textile Institute, 113(3), 484–493. https://doi.org/10.1080/00405000.2021.1889131

Ahrari, M., Karahan, M., Hussain, M., Nawab, Y., Khan, A., & Shirazi, A. A. (2022). Development of Anti-Bacterial and Anti-Viral Nonwoven Surgical Masks for Medical Applications,Razvoj protibakterijskih in protivirusnih netkanih kirurških mask za medicinske namene. Tekstilec, Vol. 65, pp. 135–146. https://doi.org/10.14502/tekstilec.65.2022020

Hussain, M., Arif, S., Nawab, Y., Shaker, K., & Umair, M. (2022). Development of functional (flame-retardant and anti-bacterial) and hybrid (carbon-glass/epoxy) composites with improved low velocity impact response. Polymer Composites, 43(2), 889–905. https://doi.org/10.1002/pc.26418

Hameed, M. N., Nawab, Y., Zubair, M., Umair, M., Ahmad, Z., & Shaker, K. (2022). Double face fabrics: a tailorable solution for puncture resistant applications. Journal of the Textile Institute, 113(6), 1197–1205. https://doi.org/10.1080/00405000.2021.1918882

Ahmad, H. S., Hussain, T., Nawab, Y., & Salamat, S. (2022). Effect of Different Dielectric and Magnetic Nanoparticles on the Electrical, Mechanical, and Thermal Properties of Unidirectional Carbon Fiber-Reinforced Composites. International Journal of Polymer Science, 2022. https://doi.org/10.1155/2022/5952450

Shah, A. A., Shahid, M., Siddiqui, N. A., YNawab, & Iqbal, M. (2022). Effect of Geometric Arrangement on Mechanical Properties of 2D Woven Auxetic Fabrics. Textiles. https://doi.org/10.3390/textiles2040035

Ahmad, A., Moeed, A., Tariq, A., Nawab, Y., Farooq, M. U., & Umair, M. (2022). Effect of Hybridization Approach on Mechanical Performance of Jute-hemp/epoxy Hybrid Composite Laminates. Journal of Natural Fibers. https://doi.org/10.1080/15440478.2022.2064398

Rehman, M. M., Shaker, K., & Nawab, Y. (2022). Effect of PEEK Particles on Physiomechanical Behavior of Carbon/Epoxy Composite. International Journal of Polymer Science, 2022. https://doi.org/10.1155/2022/8161684

Ahmad, H. S., Hussain, T., Nawab, Y., & Salamat, S. (2022). Effect of dielectric and magnetic nanofillers on electromagnetic interference shielding effectiveness of carbon/epoxy composites. Journal of Composite Materials, 56(1), 69–82. https://doi.org/10.1177/00219983211052615

Hussain, M., Imad, A., Nawab, Y., Saouab, A., Herbelot, C., & Kanit, T. (2022). Effect of matrix and hybrid reinforcement on fibre metal laminates under low–velocity impact loading. Composite Structures, 288. https://doi.org/10.1016/j.compstruct.2022.115371

Nazir, M. U., Javaid, M. U., Shaker, K., Nawab, Y., Hussain, T., & Umair, M. (2022). Effect of picking sequence on thermo-physiological comfort of bilayer woven fabrics. Research Journal of Textile and Apparel. https://doi.org/10.1108/RJTA-10-2021-0120

Rehman, M. M., Shaker, K., & Nawab, Y. (2022). Effect of poly ether ether ketone particles on v-notched shear and drop weight impact behavior of carbon/epoxy composite. Polymer Composites, 43(5), 3219–3227. https://doi.org/10.1002/pc.26612

Effect of shear thickening fluid on mechanical properties of para-aramid fabrics. (2022). Journal of the Textile Institute. https://doi.org/10.1080/00405000.2022.2149680

Effect of surface treatment on the performance of composite-composite and composite-metal adhesive joints. (2022). Polymer Composites. https://doi.org/10.1002/PC.26940

Ahmad, H. S., Hussain, T., Nawab, Y., & Salamat, S. (2022). Effect of various dielectric and magnetic nanofillers on microwave absorption properties of carbon fiber reinforced composites structures. Ceramics International, 48(14), 19882–19890. https://doi.org/10.1016/j.ceramint.2022.03.263

Umair, M., Shaker, K., Javaid, M. U., Hussain, M., Kashif, M., & Nawab, Y. (2022). Effect of weaving patterns on damage resistance of 3D woven jointless T and H shaped reinforcements. Mechanics of Advanced Materials and Structures, 29(1), 104–117. https://doi.org/10.1080/15376494.2020.1751356

Shah, A. A., Shahid, M., Hardy, J. G., Siddiqui, N. A., Kennedy, A. R., Gul, I. H., … YNawab. (2022). Effects of Braid Angle and Material Modulus on the Negative Poisson’s Ratio of Braided Auxetic Yarns. Crystals, 12(6). https://doi.org/10.3390/cryst12060781

Shaker, K., & Nawab, Y. (2022). Fruit, Seed and Leaf Fibers. In SpringerBriefs in Materials (pp. 21–32). https://doi.org/10.1007/978-3-030-97413-8_3

Shaker, K., & Nawab, Y. (2022). Green Composite Solutions. In SpringerBriefs in Materials (pp. 1–9). https://doi.org/10.1007/978-3-030-97413-8_1

Umair, M., Hussain, M., Shaker, K., & Nawab, Y. (2022). Impact Performance of Three-dimensional Woven Composites with Novel Binding Yarn Patterns. Journal of Natural Fibers. https://doi.org/10.1080/15440478.2022.2064399

Azam, Z., Jamshaid, H., Nawab, Y., Mishra, R., Muller, M., Choteborsky, R., … Petru, M. (2022). Influence of inlay yarn type and stacking sequence on mechanical performance of knitted uni-directional thermoplastic composite prepregs. Journal of Industrial Textiles. https://doi.org/10.1177/1528083720947727

Investigating the Thermo-Physiological Comfort Properties of Weft-Knitted Smart Structures Having a Negative Poisson's Ratio. (2022). Advances in Materials Science and Engineering. https://doi.org/10.1155/2022/1896634

Shaker, K., & Nawab, Y. (2022). Lignocellulosic Fiber Structure. In SpringerBriefs in Materials (pp. 11–19). https://doi.org/10.1007/978-3-030-97413-8_2

Umair, M., Hamdani, S. T. A., Hussain, M., & Nawab, Y. (2022). Mechanical performance of 3D woven jute/green epoxy composites with novel weaving patterns. Journal of Industrial Textiles. https://doi.org/10.1177/1528083720948025

Arif, S., Nawab, Y., Shaker, K., & Umair, M. (2022). Mechanical performance of flame retardant and antibacterial glass-carbon/epoxy hybrid composites for furniture applications. Journal of Industrial Textiles. https://doi.org/10.1177/15280837221080185

Mode I Fatigue of Fibre Reinforced Polymeric Composites: A Review. (2022). Polymers. https://doi.org/10.3390/POLYM14214558

Ilyas, R. A., Yusoff, M. Z. M., Alias, A. H., Rizal, M. A. M., Hassan, S. A., Zainudin, E. S., … Sari, N. H. (2022). Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications. Polymers, 14(1). https://doi.org/10.3390/polym14010202

Numerical modeling of suspension impregnation through a fibrous medium: Application to the CRTM process. (2022). Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/07316844221142017

Optimization of Flame Retardancy & Mechanical Performance of Jute-glass/Epoxy Hybrid Composites. (2022). Fibers and Polymers. https://doi.org/10.1007/S12221-022-4049-8

Zeeshan, M., Ali, M., Riaz, R., Anjum, A. S., Nawab, Y., Qadir, M. B., & Ahmad, S. (2022). Optimizing the Auxetic Geometry Parameters in Few Yarns Based Auxetic Woven Fabrics for Enhanced Mechanical Properties Using Grey Relational Analysis. Journal of Natural Fibers. https://doi.org/10.1080/15440478.2020.1870611

Shaker, K., & Nawab, Y. (2022). Performance of Green Composites. In SpringerBriefs in Materials (pp. 57–65). https://doi.org/10.1007/978-3-030-97413-8_6

Ahmad, S., Nawab, Y., & Rasheed, A. (2022). Preface. In SpringerBriefs in Materials (p. vii). https://doi.org/10.1016/B978-0-08-012822-1.50004-8

Uddin, Z., Ahmad, F., Ullan, T., Nawab, Y., Ahmad, S., Azam, F., … Zafar, M. S. (2022). Recent trends in water purification using electrospun nanofibrous membranes. International Journal of Environmental Science and Technology. https://doi.org/10.1007/S13762-021-03603-9

The Role and Applications of Aerogels in Textiles. (2022). Advances in Materials Science and Engineering. https://doi.org/10.1155/2022/2407769

Umair, M., Javaid, M. U., Nawab, Y., Jabbar, M., Riaz, S., Abid, H. A., & Shaker, K. (2022). Thermal properties of woven fabric as a function of its structural parameters: experimentation and modeling. Research Journal of Textile and Apparel. https://doi.org/10.1108/RJTA-10-2021-0123

Nazir, M. U., Shaker, K., Nawab, Y., Hamdani, S. T. A., Abdullah, H. M., & Umair, M. (2022). Thermo-physiological Comfort of Woven Fabrics Made from Different Cellulosic Yarns. Journal of Natural Fibers. https://doi.org/10.1080/15440478.2020.1852997

Three-dimensional printable metamaterial intramedullary nails with tunable strain for the treatment of long bone fractures. (2022). Materials & Design. https://doi.org/10.1016/J.MATDES.2022.110942

Shaker, K., & Nawab, Y. (2022). Wood and Agriculture Waste Fibers. In SpringerBriefs in Materials (pp. 45–55). https://doi.org/10.1007/978-3-030-97413-8_5

Umair, M., Hamdani, S. T. A., Nawab, Y., Asghar, M. A., & Hussain, T. (2021). Compression and recovery behavior of three-dimensional woven spacer composites. Journal of Industrial Textiles, 51(1), 93–109. https://doi.org/10.1177/1528083719874477

Ahmed, H. I., Umair, M., Nawab, Y., & Hamdani, S. T. A. (2021). Development of 3D auxetic structures using para-aramid and ultra-high molecular weight polyethylene yarns. Journal of the Textile Institute, 112(9), 1417–1427. https://doi.org/10.1080/00405000.2020.1819007

Zubair, K., Shakir, M. F., Afzal, A., Rehan, Z. A., & Nawab, Y. (2021). Effect of Barium Hexaferrites and Thermally Reduced Graphene Oxide on EMI Shielding Properties in Polymer Composites. Journal of Superconductivity and Novel Magnetism, 34(1), 201–210. https://doi.org/10.1007/s10948-020-05669-x

Shaker, K., Umair, M., Hamdani, S. T. A., & Nawab, Y. (2021). Effect of Fabric Structure on the Performance of 3D Woven Pressure Sensor. Fibers and Polymers, 22(3), 847–853. https://doi.org/10.1007/s12221-021-0371-9

Khan, M. I., Umair, M., Hussain, R., & Nawab, Y. (2021). Effect of Micro-fillers on the Performance of Thermoplastic Para Aramid Composites for Impact Applications. Fibers and Polymers, 22(11), 3120–3134. https://doi.org/10.1007/s12221-021-0370-x

Nasreen, A., Shaker, K., & Nawab, Y. (2021). Effect of surface treatments on metal–composite adhesive bonding for high-performance structures: an overview. Composite Interfaces, 28(12), 1221–1256. https://doi.org/10.1080/09276440.2020.1870192

Jabbar, M., Shaker, K., Nawab, Y., & Umair, M. (2021). Effect of the stuffer yarns on the mechanical performance of novel 3D woven green composites. Composite Structures, 269. https://doi.org/10.1016/j.compstruct.2021.114023

Umair, M., Hussain, M., Abbas, Z., Shaker, K., & Nawab, Y. (2021). Effect of weave architecture and glass microspheres percentage on the low velocity impact response of hemp/green epoxy composites. Journal of Composite Materials, 55(16), 2179–2195. https://doi.org/10.1177/0021998320987605

Asghar, M. A., Imad, A., Nawab, Y., Hussain, M., & Saouab, A. (2021). Effect of yarn singeing and commingling on the mechanical properties of jute/polypropylene composites. Polymer Composites, 42(2), 828–841. https://doi.org/10.1002/pc.25868

Jabbar, A., Ahmad, A., Adnan, M., Nawab, Y., Javed, Z., & Irfan, M. (2021). Enhanced interlaminar shear and impact performance of woven carbon/epoxy composites interleaved with needle punched high performance polyethylene fiber nonwoven. Journal of Applied Polymer Science, 138(25). https://doi.org/10.1002/app.50683

Awais, H., Nawab, Y., Amjad, A., Anjang, A., Md Akil, H., & Zainol Abidin, M. S. (2021). Environmental benign natural fibre reinforced thermoplastic composites: A review. Composites Part C: Open Access, 4. https://doi.org/10.1016/j.jcomc.2020.100082

Zahid, M., Siddique, S., Anum, R., Shakir, M. F., Nawab, Y., & Rehan, Z. A. (2021). M-Type Barium Hexaferrite-Based Nanocomposites for EMI Shielding Application: a Review. Journal of Superconductivity and Novel Magnetism, 34(4), 1019–1045. https://doi.org/10.1007/s10948-021-05859-1

Ghauri, H. N., Ijaz, M., Ahmed, A., Muhammad Naveed, M. U. A., Nawab, Y., Javed, M. U., & Ghaffar, A. (2021). MOLECULAR INVESTIGATION AND PHYLOGENETIC ANALYSIS OF ANAPLASMOSIS IN DOGS. The Journal of Parasitology, 107(2), 295–303. https://doi.org/10.1645/20-50

Fazal, M. Z., Khan, S., Abbas, M. A., Nawab, Y., & Younis, S. (2021). Machine learning approach for prediction of crimp in cotton woven fabrics. Tehnicki Vjesnik, 28(1), 88–95. https://doi.org/10.17559/TV-20191018180716

Siddique, A., Abid, S., Shafiq, F., Nawab, Y., Wang, H., Shi, B., … Sun, B. (2021). Mode I fracture toughness of fiber-reinforced polymer composites: A review. Journal of Industrial Textiles, 50(8), 1165–1192. https://doi.org/10.1177/1528083719858767

Bajwa, G. A., Umair, M., Nawab, Y., & Rizwan, Z. (2021). Morphometry of leaf and shoot variables to assess aboveground biomass structure and carbon sequestration by different varieties of white mulberry (Morus alba L.). Journal of Forestry Research, 32(6), 2291–2300. https://doi.org/10.1007/s11676-020-01268-7

Zeeshan, M., Ali, M., Anjum, A. S., & Nawab, Y. (2021). Optimization of mechanical/thermal properties of glass/flax/waste cotton hybrid composite. Journal of Industrial Textiles, 51(5), 768–787. https://doi.org/10.1177/1528083719891420

Hussain, M., Imad, A., Saouab, A., Kanit, T., Nawab, Y., Herbelot, C., & Kashif, M. (2021). Properties and characterization of novel 3D jute reinforced natural fibre aluminium laminates. Journal of Composite Materials, 55(14), 1879–1891. https://doi.org/10.1177/0021998320980044

Zubair, K., Ashraf, A., Gulzar, H., Shakir, M. F., Nawab, Y., Rehan, Z. A., & Rashid, I. A. (2021). Study of mechanical, electrical and EMI shielding properties of polymer-based nanocomposites incorporating polyaniline coated graphene nanoparticles. Nano Express, 2(1). https://doi.org/10.1088/2632-959X/abe843

Ahmad, F., Mushtaq, B., Butt, F., Zafar, M. S., Ahmad, S., Afzal, A., … Ulker, Z. (2021). Synthesis and characterization of nonwoven cotton-reinforced cellulose hydrogel for wound dressings. Polymers, 13(23). https://doi.org/10.3390/polym13234098

Shaker, K., Nawab, Y., Shahid, S., & Saouab, A. (2021). Thermal expansion coefficient: A macro-scale indicator of particle filtration in composites fabricated by resin infusion. Polymer Testing, 96. https://doi.org/10.1016/j.polymertesting.2021.107083

Ahmed, A., Ijaz, M., Ayyub, R. M., Ghaffar, A., Ghauri, H. N., Aziz, M. U., … Javed, M. U. (2020). Balantidium coli in domestic animals: An emerging protozoan pathogen of zoonotic significance. Acta Tropica, 203. https://doi.org/10.1016/j.actatropica.2019.105298

Ahmed, U., Tariq, A., Nawab, Y., Shaker, K., Khaliq, Z., & Umair, M. (2020). Comparison of Mechanical Behavior of Biaxial, Unidirectional and Standard Woven Fabric Reinforced Composites. Fibers and Polymers, 21(6), 1308–1315. https://doi.org/10.1007/s12221-020-9915-7

Ullah, T., Ahmad, S., & Nawab, Y. (2020). Development of helical auxetic yarn with negative Poisson’s ratio by combinations of different materials and wrapping angle. Journal of Industrial Textiles. https://doi.org/10.1177/1528083720941116

Shakir, M. F., Abdul Rashid, I., Tariq, A., Nawab, Y., Afzal, A., Nabeel, M., … Hamid, U. (2020). EMI Shielding Characteristics of Electrically Conductive Polymer Blends of PS/PANI in Microwave and IR Region. Journal of Electronic Materials, 49(3), 1660–1665. https://doi.org/10.1007/s11664-019-07631-7

Shakir, M. F., Tariq, A., Rehan, Z. A., Nawab, Y., Abdul Rashid, I., Afzal, A., … Muttaqi, M. (2020). Effect of Nickel-spinal-Ferrites on EMI shielding properties of polystyrene/polyaniline blend. SN Applied Sciences, 2(4). https://doi.org/10.1007/s42452-020-2535-4

Awais, H., Nawab, Y., Anjang, A., Md Akil, H., & Zainol Abidin, M. S. (2020). Effect of fabric architecture on the shear and impact properties of natural fibre reinforced composites. Composites Part B: Engineering, 195. https://doi.org/10.1016/j.compositesb.2020.108069

Abbas, Z., Shahid, S., Nawab, Y., Shaker, K., & Umair, M. (2020). Effect of glass microspheres and fabric weave structure on mechanical performance of hemp/green epoxy composites. Polymer Composites, 41(11), 4771–4787. https://doi.org/10.1002/pc.25751

Aaboud, B., Bizet, L., Saouab, A., & Nawab, Y. (2020). Effect of the spatial variation of permeability on air bubble creation and compression. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/0731684419899475

Gulzar, N., Zubair, K., Shakir, M. F., Zahid, M., Nawab, Y., & Rehan, Z. A. (2020). Effect on the EMI Shielding Properties of Cobalt Ferrites and Coal-Fly-Ash Based Polymer Nanocomposites. Journal of Superconductivity and Novel Magnetism, 33(11), 3519–3524. https://doi.org/10.1007/s10948-020-05608-w

Shaker, K., Nawab, Y., & Saouab, A. (2020). Experimental and numerical investigation of reduction in shape distortion for angled composite parts. International Journal of Material Forming, 13(6), 897–906. https://doi.org/10.1007/s12289-019-01510-6

Shaker, K., Waseem Ullah Khan, R. M., Jabbar, M., Umair, M., Tariq, A., Kashif, M., & Nawab, Y. (2020). Extraction and characterization of novel fibers from Vernonia elaeagnifolia as a potential textile fiber. Industrial Crops and Products, 152. https://doi.org/10.1016/j.indcrop.2020.112518

Awais, H., Nawab, Y., Amjad, A., Anjang, A., & Zainol Abidin, M. S. (2020). Fabrication and characterization of lightweight engineered polypropylene composites using silica particles and flax woven comingled structure. In Lecture Notes in Mechanical Engineering (pp. 403–410). https://doi.org/10.1007/978-981-15-4756-0_34

Zahid, M., Nawab, Y., Gulzar, N., Rehan, Z. A., Shakir, M. F., Afzal, A., … Tariq, A. (2020). Fabrication of reduced graphene oxide (RGO) and nanocomposite with thermoplastic polyurethane (TPU) for EMI shielding application. Journal of Materials Science: Materials in Electronics, 31(2), 967–974. https://doi.org/10.1007/S10854-019-02607-Z

Shaker, K., & Nawab, Y. (2020). Fibers for Protective Textiles. In Topics in Mining, Metallurgy and Materials Engineering (pp. 65–91). https://doi.org/10.1007/978-3-030-49224-3_4

Khan, M. I., Umair, M., Shaker, K., Basit, A., Nawab, Y., & Kashif, M. (2020). Impact of waste fibers on the mechanical performance of concrete composites. Journal of the Textile Institute. https://doi.org/10.1080/00405000.2020.1736423

Nawab, Y., & Ahmad, S. (2020). Introduction. In Topics in Mining, Metallurgy and Materials Engineering (pp. 1–20). https://doi.org/10.1007/978-3-030-49224-3_1

Awais, H., Nawab, Y., Anjang, A., Akil, H. M., & Abidin, M. S. Z. (2020). Mechanical Properties of Continuous Natural Fibres (Jute, Hemp, Flax) Reinforced Polypropylene Composites Modified with Hollow Glass Microspheres. Fibers and Polymers, 21(9), 2076–2083. https://doi.org/10.1007/s12221-020-2260-z

Jabbar, M., Nawab, Y., Karahan, M., Ashraf, M., & Hussain, T. (2020). Mechanical Response of Novel 3D Woven Flax Composites with Variation in Z Yarn Binding. Journal of Natural Fibers, 17(6), 890–905. https://doi.org/10.1080/15440478.2018.1539939

Awais, H., Nawab, Y., Amjad, A., Anjang, A., & Abidin, M. S. Z. (2020). Mechanical properties of hollow glass microspheres filled jute woven comingled composites. In Key Engineering Materials (pp. 41–46). https://doi.org/10.4028/www.scientific.net/KEM.858.41

Iftekhar, H., Ullah Khan, R. M. W., Nawab, Y., Hamdani, S. T. A., & Panchal, S. (2020). Numerical Analysis of Binding Yarn Float Length for 3D Auxetic Structures. Physica Status Solidi (B) Basic Research, 257(10). https://doi.org/10.1002/pssb.202000440

Iftekhar, H., Ullah Khan, R. M. W., Asghar, M. A., Qadeer, A., Umair, M., Nawab, Y., & Hamdani, S. T. A. (2020). Study of comfort performance of novel car seat design for long drive. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 234(2-3), 645–651. https://doi.org/10.1177/0954407019852279

Shaker, K., Nawab, Y., Ayub Asghar, M., Nasreen, A., & Jabbar, M. (2020). Tailoring the properties of leno woven fabrics by varying the structure. Mechanics of Advanced Materials and Structures, 27(22), 1865–1872. https://doi.org/10.1080/15376494.2018.1527964

Nawab, A., Li, G., An, L., Nawab, Y., Zhao, Y., Xiao, M., … Sun, C. (2020). The Potential Effect of Dietary Tannins on Enteric Methane Emission and Ruminant Production, as an Alternative to Antibiotic Feed Additives-A Review. Annals of Animal Science, 20(2), 355–388. https://doi.org/10.2478/aoas-2020-0005

Rehman, A., Jabbar, M., Umair, M., Nawab, Y., Jabbar, M., & Shaker, K. (2019). A study on the interdependence of fabric pore size and its mechanical and comfort properties. Journal of Natural Fibers, 16(6), 795–805. https://doi.org/10.1080/15440478.2018.1437861

Ameer, M. H., Nawab, Y., Ali, Z., Imad, A., & Ahmad, S. (2019). Development and characterization of jute/polypropylene composite by using comingled nonwoven structures. Journal of the Textile Institute. https://doi.org/10.1080/00405000.2019.1612502

Khan, M. I., Akram, J., Umair, M., Hamdani, S. T. A., Shaker, K., Nawab, Y., & Zeeshan, M. (2019). Development of composites, reinforced by novel 3D woven orthogonal fabrics with enhanced auxeticity. Journal of Industrial Textiles, 49(5), 676–690. https://doi.org/10.1177/1528083718795912

Shaker, K., Umair, M., Jabbar, M., Baitab, D. M., Nawab, Y., Afzal, A., & Ahmad, S. (2019). EFFECT OF FABRIC STRUCTURAL DESIGN ON THE THERMAL PROPERTIES OF WOVEN FABRICS. Thermal Science, 2018. https://doi.org/10.2298/TSCI170707003S

Umair, M., Hamdani, S. T. A., Nawab, Y., Asghar, M. A., Hussain, T., & Saouab, A. (2019). Effect of Pile Height on the Mechanical Properties of 3D Woven Spacer Composites. Fibers and Polymers, 20(6), 1258–1265. https://doi.org/10.1007/S12221-019-8761-Y

Awais, H., Nawab, Y., Amjad, A., Anjang, A., Md Akil, H., & Zainol Abidin, M. S. (2019). Effect of comingling techniques on mechanical properties of natural fibre reinforced cross-ply thermoplastic composites. Composites Part B: Engineering, 177. https://doi.org/10.1016/j.compositesb.2019.107279

Kashif, M., Hamdani, S. T. A., Zubair, M., & Nawab, Y. (2019). Effect of interlocking pattern on short beam strength of 3D woven composites. Journal of Composite Materials. https://doi.org/10.1177/0021998319839441

Rehman, M. M., Zeeshan, M., Shaker, K., & Nawab, Y. (2019). Effect of micro-crystalline cellulose particles on mechanical properties of alkaline treated jute fabric reinforced green epoxy composite. Cellulose, 26(17), 9057–9069. https://doi.org/10.1007/s10570-019-02679-4

Jabbar, M., Karahan, M., Nawab, Y., Ashraf, M., & Hussain, T. (2019). Effect of silica nanoparticles on mechanical properties of Kevlar/epoxy hybrid composites. Journal of the Textile Institute, 110(4), 606–613. https://doi.org/10.1080/00405000.2018.1529213

Karahan, M., Karahan, N., Nasir, M. A., & Nawab, Y. (2019). Effect of structural hybridization on ballistic performance of aramid fabrics. Journal of Thermoplastic Composite Materials, 32(6), 795–814. https://doi.org/10.1177/0892705718780197

Zahid, S., Nasir, M. A., Nauman, S., Karahan, M., Nawab, Y., Ali, H. M., … Ullah, M. (2019). Experimental analysis of ILSS of glass fibre reinforced thermoplastic and thermoset textile composites enhanced with multiwalled carbon nanotubes. Journal of Mechanical Science and Technology, 33(1), 197–204. https://doi.org/10.1007/S12206-018-1219-0

Shaker, K., Umair, M., Ashraf, W., & Nawab, Y. (2019). Fabric manufacturing. Physical Sciences Reviews, 1(7). https://doi.org/10.1515/psr-2016-0024

Wassem, M., Baig, S. A., Abrar, M., Hashim, M., Zia-Ur-Rehman, M., Awan, U., … Nawab, Y. (2019). Impact of Capacity Building and Managerial Support on Employees' Performance: The Moderating Role of Employees' Retention. SAGE Open, 9(3). https://doi.org/10.1177/2158244019859957

Shaker, K., Nawab, Y., & Saouab, A. (2019). Influence of silica fillers on failure modes of glass/vinyl ester composites under different mechanical loadings. Engineering Fracture Mechanics, 218. https://doi.org/10.1016/j.engfracmech.2019.106605

Ali, M., Kausar, F., Shahid, S., Zeeshan, M., Nawab, Y., Riaz, R., … Anjum, A. S. (2019). Novel derivatives of 3D woven T-shaped composites with improved performance. Journal of the Textile Institute, 110(2), 267–273. https://doi.org/10.1080/00405000.2018.1480914

Kashif, M., Hamdani, S. T. A., Nawab, Y., Asghar, M. A., Umair, M., & Shaker, K. (2019). Optimization of 3D woven preform for improved mechanical performance. Journal of Industrial Textiles, 48(7), 1206–1227. https://doi.org/10.1177/1528083718760802

Nazir, M. U., Shaker, K., Hussain, R., & Nawab, Y. (2019). Performance of novel auxetic woven fabrics produced using Helical Auxetic Yarn. Materials Research Express, 6(8). https://doi.org/10.1088/2053-1591/ab1a7e

Raza, M., Shaker, K., Nawab, Y., & Saouab, A. (2019). Reduction in process-induced shape distortion of C-shaped composite parts using micro silica particles. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/S00170-019-03981-Y

Bajwa, G. A., Nawab, Y., Umair, M., & Rizwan, Z. (2019). Techno-mechanical properties of cocoon, raw silk and filament of two mulberry silkworm (Bombyx mori L.) strains,Technologisch-mechanische Eigenschaften von Kokon, Rohseide und Fasern zweier Seidenspinnerarten (Bombyx mori L.). Materialwissenschaft Und Werkstofftechnik, 50(10), 1287–1294. https://doi.org/10.1002/mawe.201800052

Nawab, Y., Kashif, M., Asghar, M. A., Asghar, A., Umair, M., Shaker, K., & Zeeshan, M. (2018). Development & Characterization of Green Composites Using Novel 3D Woven Preforms. Applied Composite Materials, 25(4), 747–759. https://doi.org/10.1007/S10443-018-9720-2

Ali, M., Zeeshan, M., Ahmed, S., Qadir, B., Nawab, Y., Anjum, A. S., & Riaz, R. (2018). Development and Comfort Characterization of 2D-Woven Auxetic Fabric for Wearable and Medical Textile Applications. Clothing and Textiles Research Journal, 36(3), 199–214. https://doi.org/10.1177/0887302X18768048

Ali, M., Zeeshan, M., Qadir, M. B., Riaz, R., Ahmad, S., Nawab, Y., & Anjum, A. S. (2018). Development and Mechanical Characterization of Weave Design Based 2D Woven Auxetic Fabrics for Protective Textiles. Fibers and Polymers, 19(11), 2431–2438. https://doi.org/10.1007/S12221-018-8627-8

Karahan, M., Masood, Z., Nawab, Y., & Karahan, N. (2018). Development and characterization of hybrid green composites from textile waste. In Advances in Intelligent Systems and Computing (Vol. 606, pp. 37–49). https://doi.org/10.1007/978-3-319-60474-9_4

Nasreen, A., Umair, M., Shaker, K., Hamdani, S. T. A., & Nawab, Y. (2018). Development and characterization of three-dimensional woven fabric for ultra violet protection. International Journal of Clothing Science and Technology, 30(4), 536–547. https://doi.org/10.1108/IJCST-02-2018-0013

Shaker, K., Nawab, Y., Saouab, A., Ashraf, M., & Khan, A. N. (2018). Effect of silica particle loading on shape distortion in glass/vinyl ester-laminated composite plates. Journal of the Textile Institute, 109(5), 656–664. https://doi.org/10.1080/00405000.2017.1363932

Ali, M., Nawab, Y., Saouab, A., Anjum, A. S., & Zeeshan, M. (2018). Fabrication induced spring-back in thermosetting woven composite parts with variable thickness. Journal of Industrial Textiles, 47(6), 1291–1304. https://doi.org/10.1177/1528083716686939

Nawab, A., Ibtisham, F., Li, G., Kieser, B., Wu, J., Liu, W., … An, L. (2018). Heat stress in poultry production: Mitigation strategies to overcome the future challenges facing the global poultry industry. Journal of Thermal Biology, 78, 131–139. https://doi.org/10.1016/j.jtherbio.2018.08.010

Ali, A., Shaker, K., Nawab, Y., Jabbar, M., Hussain, T., Militky, J., & Baheti, V. (2018). Hydrophobic treatment of natural fibers and their composites—A review. Journal of Industrial Textiles, 47(8), 2153–2183. https://doi.org/10.1177/1528083716654468

Hussain, M., Nawab, Y., Rizwan, Z., Mumtaz, A., & Basit, A. (2018). Investigation of mechanical properties of auxetic woven polymer composite material: Untersuchung der mechanischen Eigenschaften von auxetisch gewebten Polymer-Verbundwerkstoffen. Materialwissenschaft Und Werkstofftechnik, 49(2), 206–209. https://doi.org/10.1002/mawe.201700145

Masood, Z., Ahmad, S., Umair, M., Shaker, K., Nawab, Y., & Karahan, M. (2018). Mechanical behaviour of hybrid composites developed from textile waste,Ocena właściwości mechanicznych kompozytów hybrydowych wytworzonych z odpadów włókienniczych. Fibres and Textiles in Eastern Europe, 26(1), 46–52. https://doi.org/10.5604/01.3001.0010.7796

Umair, M., Hamdani, S. T. A., Asghar, M. A., Hussain, T., Karahan, M., Nawab, Y., & Ali, M. (2018). Study of influence of interlocking patterns on the mechanical performance of 3D multilayer woven composites. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/0731684417751059

Nawab, A., Liu, W., Li, G., Ibtisham, F., Fox, D. P., Zhao, Y., … An, L. (2018). The Potential Role of Probiotics (nutraceuticals) in Gut Health of Domestic Animals; an Alternative to Antibiotic Growth Promoters. Journal of the Hellenic Veterinary Medical Society, 69(4), 1169–1188. https://doi.org/10.12681/jhvms.19600

A Study on the Twist Loss in Weft Yarn During Air Jet Weaving. (2017). Journal of Engineered Fibers and Fabrics. Retrieved from https://publons.com/wos-op/publon/2452966/

Umair, M., Shaker, K., Nawab, Y., Rasheed, A., & Ahmad, S. (2017). A study on the twist loss in weft yarn during air jet weaving. Journal of Engineered Fibers and Fabrics, 12(4), 1–6. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85036662662&partnerID=MN8TOARS

Afzal, A., Ahmad, S., Rasheed, A., Mohsin, M., Ahmad, F., & Nawab, Y. (2017). CHARACTERIZATION AND STATISTICAL MODELLING OF THERMAL RESISTANCE OF COTTON/POLYESTER BLENDED DOUBLE LAYER INTERLOCK KNITTED FABRICS. Thermal Science, 21(6), 2393–2403. https://doi.org/10.2298/TSCI150520201A

Nawab, Y., Sonnenfeld, C., Saouab, A., Agogué, R., & Beauchêne, P. (2017). Characterisation and modelling of thermal expansion coefficient of woven carbon/epoxy composite and its application to the determination of spring-in. Journal of Composite Materials, 51(11), 1527–1538. https://doi.org/10.1177/0021998316661404

Maqsood, M., Nawab, Y., Umar, J., Umair, M., & Shaker, K. (2017). Comparison of compression properties of stretchable knitted fabrics and bi-stretch woven fabrics for compression garments. Journal of the Textile Institute, 108(4), 522–527. https://doi.org/10.1080/00405000.2016.1172432

Composite Materials Testing. (2017). Advanced Textile Testing Techniques. Retrieved from https://publons.com/wos-op/publon/27557872/

Shaker, K., & Nawab, Y. (2017). Composite materials testing. In Advanced Textile Testing Techniques (pp. 247–270). https://doi.org/10.1201/b21272

Nawab, Y., Ali Hamdani, S. T., & Shaker, K. (2017). Conventional woven structures. In Structural Textile Design: Interlacing and Interlooping (pp. 47–83). https://doi.org/10.1201/9781315390406

Afzal, A., Ahmad, S., Rasheed, A., Ahmad, F., Iftikhar, F., & Nawab, Y. (2017). INFLUENCE OF FABRIC PARAMETERS ON THERMAL COMFORT PERFORMANCE OF DOUBLE LAYER KNITTED INTERLOCK FABRICS. Autex Research Journal, 17(1), 20–26. https://doi.org/10.1515/AUT-2015-0037

Ameer, M. H., Shaker, K., Ashraf, M., Karahan, M., Nawab, Y., Ahmad, S., & Ali Nasir, M. (2017). Interdependence of moisture, mechanical properties, and hydrophobic treatment of jute fibre-reinforced composite materials. Journal of the Textile Institute, 108(10), 1768–1776. https://doi.org/10.1080/00405000.2017.1285201

Nazir, M. U., Shaker, K., Nawab, Y., Fazal, M. Z., Khan, M. I., & Umair, M. (2017). Investigating the effect of material and weave design on comfort properties of bilayer-woven fabrics. Journal of the Textile Institute, 108(8), 1319–1326. https://doi.org/10.1080/00405000.2016.1247616

Umar, M., Shaker, K., Ahmad, S., Nawab, Y., Umair, M., & Maqsood, M. (2017). Investigating the mechanical behavior of composites made from textile industry waste. Journal of the Textile Institute, 108(5), 835–839. https://doi.org/10.1080/00405000.2016.1193982

Ashraf, W., Nawab, Y., Umair, M., Shaker, K., & Karahan, M. (2017). Investigation of mechanical behavior of woven/knitted hybrid composites. Journal of the Textile Institute, 108(9), 1510–1517. https://doi.org/10.1080/00405000.2016.1258951

Investigation of multi-layered woven car seatbelts with optimum performance. (2017). Industria Textila. Retrieved from https://publons.com/wos-op/publon/990646/

Zulifqar, A., Shaker, K., Nawab, Y., Umair, M., Baitab, D. M., & Maqsood, M. (2017). Investigation of multi-layered woven car seatbelts with optimum performance. Industria Textila, 68(2), 77–82. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85020037207&partnerID=MN8TOARS

Maqsood, M., Hussain, T., Ahmad, N., & Nawab, Y. (2017). Multi-response optimization of mechanical and comfort properties of bi-stretch woven fabrics using grey relational analysis in Taguchi method. Journal of the Textile Institute, 108(5), 794–802. https://doi.org/10.1080/00405000.2016.1191721

Jabbar, M., Shaker, K., Umair, M., & Nawab, Y. (2017). Optimizing the performance of woven protective gloves using grey relational analysis. Journal of the Textile Institute, 108(10), 1715–1719. https://doi.org/10.1080/00405000.2017.1281709

Ahmad, S., Ashraf, M., Ali, A., Shaker, K., Umair, M., Afzal, A., … Rasheed, A. (2017). Preparation of conductive polyethylene terephthalate yarns by deposition of silver & copper nanoparticles. Fibres and Textiles in Eastern Europe, 25(5), 25–30. https://doi.org/10.5604/01.3001.0010.4623

Maqsood, M., Khan, M. I., Shaker, K., Umair, M., & Nawab, Y. (2017). Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials. Journal of the Textile Institute, 108(1), 84–88. https://doi.org/10.1080/00405000.2016.1153875

Aaboud, B., Saouab, A., & Nawab, Y. (2017). Simulation of air bubble’s creation, compression, and transport phenomena in resin transfer moulding. Journal of Composite Materials, 51(29), 4115–4127. https://doi.org/10.1177/0021998317697481

Umair, M., Shaker, K., Ahmad, N., Hussain, M., Jabbar, M., & Nawab, Y. (2017). Simultaneous Optimization of Woven Fabric Properties Using Principal Component Analysis. Journal of Natural Fibers, 14(6), 846–857. https://doi.org/10.1080/15440478.2017.1279994

Shaker, K., Jabbar, A., Karahan, M., Karahan, N., & Nawab, Y. (2017). Study of dynamic compressive behaviour of aramid and ultrahigh molecular weight polyethylene composites using Split Hopkinson Pressure Bar. Journal of Composite Materials, 51(1), 81–94. https://doi.org/10.1177/0021998316635241

Liaqat, M., Samad, H. A., Hamdani, S. T. A., & Nawab, Y. (2017). The development of novel auxetic woven structure for impact applications. Journal of the Textile Institute, 108(7), 1264–1270. https://doi.org/10.1080/00405000.2016.1239330

Shaker, K., Ashraf, M., Jabbar, M., Shahid, S., Nawab, Y., Zia, J., & Rehman, A. (2016). Bioactive woven flax-based composites: Development and characterisation. Journal of Industrial Textiles, 46(2), 549–561. https://doi.org/10.1177/1528083715591579

Sonnenfeld, C., Agogué, R., Beauchêne, P., Nawab, Y., Saouab, A., Anfray, E., & Desjoyeaux, B. (2016). Characterization and modelling of spring-in effect on Z-shape composite part. ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85018547400&partnerID=MN8TOARS

Umair, M., Hussain, T., Shaker, K., Nawab, Y., Maqsood, M., & Jabbar, M. (2016). Effect of woven fabric structure on the air permeability and moisture management properties. Journal of the Textile Institute, 107(5), 596–605. https://doi.org/10.1080/00405000.2015.1054124

Nawab, Y., & Jacquemin, F. (2016). From the Characterization and Modeling of Cure-Dependent Properties of Composite Materials to the Simulation of Residual Stresses. In Heat Transfer in Polymer Composite Materials: Forming Processes (pp. 157–174). https://doi.org/10.1002/9781119116288.ch5

From the Characterization and Modeling of Cure-Dependent Properties of Composite Materials to the Simulation of Residual Stresses. (2016). Heat Transfer in Polymer Composite Materials: Forming Processes. Retrieved from https://publons.com/wos-op/publon/51749886/

Jabbar, A., Militk?, J., Madhukar Kale, B., Rwawiire, S., Nawab, Y., & Baheti, V. (2016). Modeling and analysis of the creep behavior of jute/green epoxy composites incorporated with chemically treated pulverized nano/micro jute fibers. Industrial Crops and Products, 84, 230–240. https://doi.org/10.1016/j.indcrop.2015.12.052

Maqsood, M., Hussain, T., Malik, M. H., & Nawab, Y. (2016). Modeling the effect of elastane linear density, fabric thread density, and weave float on the stretch, recovery, and compression properties of bi-stretch woven fabrics for compression garments. Journal of the Textile Institute, 107(3), 307–315. https://doi.org/10.1080/00405000.2015.1029809

Maqsood, M., Nawab, Y., Hamdani, S. T. A., Shaker, K., Umair, M., & Ashraf, W. (2016). Modeling the effect of weave structure and fabric thread density on the barrier effectiveness of woven surgical gowns. Journal of the Textile Institute, 107(7), 873–878. https://doi.org/10.1080/00405000.2015.1070027

Maqsood, M., Nawab, Y., Shaker, K., Umair, M., Ashraf, M., Baitab, D. M., … Shahid, S. (2016). Modelling the effect of weave structure and fabric thread density on mechanical and comfort properties of woven fabrics. Autex Research Journal, 16(3), 160–164. https://doi.org/10.1515/aut-2015-0032

Koyuncu, M., Karahan, M., Karahan, N., Shaker, K., & Nawab, Y. (2016). Static and dynamic mechanical properties of cotton/epoxy green composites. Fibres and Textiles in Eastern Europe, 24(4), 105–111. https://doi.org/10.5604/12303666.1201139

Shaker, K., Umair, M., Maqsood, M., Nawab, Y., Ahmad, S., Rasheed, A., … Basit, A. (2015). A Statistical Approach for Obtaining the Controlled Woven Fabric Width. Autex Research Journal, 15(4), 275–279. https://doi.org/10.1515/aut-2015-0008

Umair, M., Nawab, Y., Malik, M. H., & Shaker, K. (2015). Development and characterization of three-dimensional woven-shaped preforms and their associated composites. Journal of Reinforced Plastics and Composites, 34(24), 2018–2028. https://doi.org/10.1177/0731684415608958

Shaker, K., Nawab, Y., Javaid, M. U., Umair, M., & Maqsood, M. (2015). Development of 3D woven fabric based pressure switch. Autex Research Journal, 15(2), 148–152. https://doi.org/10.1515/aut-2015-0015

Maqsood, M., Nawab, Y., Javaid, M. U., Shaker, K., & Umair, M. (2015). Development of seersucker fabrics using single warp beam and modelling of their stretch-recovery behaviour. Journal of the Textile Institute, 106(11), 1154–1160. https://doi.org/10.1080/00405000.2014.977542

Ashraf, W., Nawab, Y., Maqsood, M., Khan, H., Awais, H., Ahmad, S., … Ahmad, S. (2015). Development of seersucker knitted fabric for better comfort properties and aesthetic appearance. Fibers and Polymers, 16(3), 699–701. https://doi.org/10.1007/s12221-015-0699-0

Ali, A., Shaker, K., Nawab, Y., Ashraf, M., Basit, A., Shahid, S., & Umair, M. (2015). Impact of hydrophobic treatment of jute on moisture regain and mechanical properties of composite material. Journal of Reinforced Plastics and Composites, 34(24), 2059–2068. https://doi.org/10.1177/0731684415610007

Nawab, Y., Casari, P., Boyard, N., Sobotka, V., & Jacquemin, F. (2015). In situ characterization of in-plane chemical shrinkage of thermoset laminated composites using a simple setup. Journal of Reinforced Plastics and Composites, 34(11), 931–938. https://doi.org/10.1177/0731684415584634

Khan, M. Z., Ashraf, M., Hussain, T., Rehman, A., Malik, M. M., Raza, Z. A., … Zia, Q. (2015). In situ deposition of TiO<inf>2</inf> nanoparticles on polyester fabric and study of its functional properties. Fibers and Polymers, 16(5), 1092–1097. https://doi.org/10.1007/s12221-015-1092-8

Nawab, Y., Park, C. H., Saouab, A., Agogué, R., & Beauchêne, P. (2015). Modeling the Residual Stress in Woven Thermoset Composites Parts for Aerospace Applications Using Finite Element Methods. {Amr}, 1099, 32–36. https://doi.org/10.4028/www.scientific.net/amr.1099.32

Jabbar, M., Nawab, Y., Ashraf, M., & Shaker, K. (2015). Numerical analysis of self-healing composite materials. Proceedings of 2015 12th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2015, 40–43. https://doi.org/10.1109/IBCAST.2015.7058476

Maqsood, M., Hussain, T., Nawab, Y., Shaker, K., & Umair, M. (2015). Prediction of warp and weft yarn crimp in cotton woven fabrics. Journal of the Textile Institute, 106(11), 1180–1189. https://doi.org/10.1080/00405000.2014.981041

Haji, H., Saouab, A., & Nawab, Y. (2015). Simulation of coupling filtration and flow in a dual scale fibrous media. Composites Part A: Applied Science and Manufacturing, 76, 272–280. https://doi.org/10.1016/j.compositesa.2015.06.004

Nawab, Y., Boyard, N., & Jaquemin, F. (2014). Effect of pressure and reinforcement type on the volume chemical shrinkage in thermoset resin and composite. Journal of Composite Materials, 48(26), 3191–3199. https://doi.org/10.1177/0021998313502692

Nawab, Y., Park, C. H., Saouab, A., Agogué, R., Beauchêne, P., & Desjoyaux, B. (2014). Shape Distortion of Carbon/Epoxy Composite Parts During Fabrication. Macromolecular Symposia, 340(1), 59–64. https://doi.org/10.1002/masy.201300124

Nawab, Y., Casari, P., Boyard, N., & Jacquemin, F. (2013). Characterization of the cure shrinkage, reaction kinetics, bulk modulus and thermal conductivity of thermoset resin from a single experiment. Journal of Materials Science, 48(6), 2394–2403. https://doi.org/10.1007/s10853-012-7026-6

Nawab, Y., Shahid, S., Boyard, N., & Jacquemin, F. (2013). Chemical shrinkage characterization techniques for thermoset resins and associated composites. Journal of Materials Science, 48(16), 5387–5409. https://doi.org/10.1007/s10853-013-7333-6

Nawab, Y., Jaquemin, F., Casari, P., Boyard, N., & Sobotka, V. (2013). Evolution of chemical and thermal curvatures in thermoset-laminated composite plates during the fabrication process. Journal of Composite Materials, 47(3), 327–339. https://doi.org/10.1177/0021998312440130

Nawab, Y., Jacquemin, F., Casari, P., Boyard, N., Borjon-Piron, Y., & Sobotka, V. (2013). Study of variation of thermal expansion coefficients in carbon/epoxy laminated composite plates. Composites Part B: Engineering, 50, 144–149. https://doi.org/10.1016/j.compositesb.2013.02.002

Nawab, Y., Tardif, X., Boyard, N., Sobotka, V., Casari, P., & Jacquemin, F. (2012). Determination and modelling of the cure shrinkage of epoxy vinylester resin and associated composites by considering thermal gradients. Composites Science and Technology, 73(1), 81–87. https://doi.org/10.1016/j.compscitech.2012.09.018

Nawab, Y., Boyard, N., Sobotka, V., Casari, P., & Jacquemin, F. (2012). Measurement and modelling of chemical shrinkage of thermoset composites. Key Engineering Materials, 504-506, 1129–1134. https://doi.org/10.4028/WWW.SCIENTIFIC.NET/KEM.504-506.1129

Nawab, Y., Jacquemin, F., Casari, P., Boyard, N., & Sobotka, V. (2012). Shape evolution of carbon epoxy laminated composite during curing. In Key Engineering Materials (Vol. 504-506, pp. 1145–1150). https://doi.org/10.4028/www.scientific.net/KEM.504-506.1145

Nawab, Y., Legrand, X., & Koncar, V. (2012). Study of changes in 3D-woven multilayer interlock fabric preforms while forming. Journal of the Textile Institute, 103(12), 1273–1279. https://doi.org/10.1080/00405000.2012.676267

Nawab, Y., Boyard, N., Sobotka, V., Casari, P., & Jacquemin, F. (2011). A device to measure the shrinkage and heat transfers during the curing cycle of thermoset composites. Advanced Materials Research, 326, 19–28. https://doi.org/10.4028/WWW.SCIENTIFIC.NET/AMR.326.19