Mohammed Zikry

Phillips, M., Chen, M.-J., Ryu, J., & Zikry, M. (2024, September 12). Dynamic Behavior of Ribbed Viscoelastic CNT-PDMS Thin-Films for Multifunctional Applications. MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. 9. https://doi.org/10.1002/mame.202400098

Chen, M.-J., Li, N., Gigax, J., Hunter, A., Fensin, S., & Zikry, M. A. (2024). How are microstructural defect interactions linked to simultaneous intergranular and transgranular fracture modes in polycrystalline systems? JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 188. https://doi.org/10.1016/j.jmps.2024.105674

Xu, W., Zikry, M., & Seyam, A.-F. M. (2024). Impact Performance of 3D Orthogonal Woven Composites: A Finite Element Study on Structural Parameters. JOURNAL OF COMPOSITES SCIENCE, 8(6). https://doi.org/10.3390/jcs8060193

Chen, M.-J., Xie, D., Fensin, S., Hunter, A., Li, N., & Zikry, M. A. (2024). Intergranular fracture, grain-boundary structure, and dislocation-density interactions in FCC bicrystals. SCIENTIFIC REPORTS, 14(1). https://doi.org/10.1038/s41598-024-72033-7

Phillips, M., Zaghari, P., Ryu, J. E., & Zikry, M. (2024). Microstructural behavior of CNT-PDMS thin-films for multifunctional systems. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 187. https://doi.org/10.1016/j.compositesa.2024.108473

Arcari, A., Zikry, M. A., Callahan, P. G., Horton, D. J., & Chen, M.-J. (2024, June 4). Modeling hydrogen diffusion in precipitation hardened nickel-based alloy 718 by microstructural modeling. CORROSION REVIEWS, Vol. 6. https://doi.org/10.1515/corrrev-2024-0013

Xu, W., Zikry, M., & Seyam, A.-F. M. (2024). Numerical Study of the Influence of the Structural Parameters on the Stress Dissipation of 3D Orthogonal Woven Composites under Low-Velocity Impact. TECHNOLOGIES, 12(4). https://doi.org/10.3390/technologies12040049

Xie, D., Chen, M.-J., Gigax, J., Luscher, D., Wang, J., Hunter, A., … Li, N. (2023). A fundamental understanding of how dislocation densities affect strain hardening behavior in copper single crystalline micropillars. MECHANICS OF MATERIALS, 184. https://doi.org/10.1016/j.mechmat.2023.104731

Hasan, T., Capolungo, L., & Zikry, M. (2023). A machine learning microstructurally predictive framework for the failure of hydrided zirconium alloys. NPJ MATERIALS DEGRADATION, 7(1). https://doi.org/10.1038/s41529-023-00344-7

Chen, M.-J., Xie, D., Li, N., & Zikry, M. A. (2023). Dislocation-density evolution and pileups in bicrystalline systems. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 870. https://doi.org/10.1016/j.msea.2023.144812

Hasan, T., Capolungo, L., & Zikry, M. A. (2023). How can machine learning be used for accurate representations and predictions of fracture nucleation in zirconium alloys with hydride populations? APL MATERIALS, 11(7). https://doi.org/10.1063/5.0155679

Arcari, A., Horton, D., Chen, M.-J., & Zikry, M. A. (2023, August 16). Precipitate and dislocation-density interactions affecting strength and ductility in inconel alloys. JOURNAL OF MATERIALS SCIENCE, Vol. 8. https://doi.org/10.1007/s10853-023-08822-8

Phillips, M., Chen, M.-J., Islam, M. D., Ryu, J., & Zikry, M. (2023, July 19). Predicting and Controlling Ribbing Instabilities of Carbon Nanotube-PDMS Thin-Film Systems for Multifunctional Applications. ADVANCED ENGINEERING MATERIALS, Vol. 7. https://doi.org/10.1002/adem.202300582

Phillips, M., Chen, M.-J., Islam, M. D., Ryu, J., & Zikry, M. (2023). Predicting and Controlling Ribbing Instabilities of Carbon Nanotube–PDMS Thin‐Film Systems for Multifunctional Applications. Advanced Engineering Materials. https://doi.org/10.1002/adem.202370077

Hasan, T., Capolungo, L., & Zikry, M. A. A. (2023). Predictive machine learning approaches for the microstructural behavior of multiphase zirconium alloys. SCIENTIFIC REPORTS, 13(1). https://doi.org/10.1038/s41598-023-32582-9

Zikry, M. A. (2023, July 1). The Fiftieth Anniversary of the Founding of the ASME Journal of Engineering Materials and Technology. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol. 145. https://doi.org/10.1115/1.4062506

Elbadry, M., Wetherington, J., & Zikry, M. A. (2022). Coupled electromagnetic and mechanical modeling and detection of buried objects. Applications in Engineering Science, 10. https://doi.org/10.1016/j.apples.2022.100106

Elbadry, M. H., Wetherington, J., & Zikry, M. A. (2022). Electromagnetic Finite-Element Modeling of Induction Effects for Buried Objects in Magnetic Soils. IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING, 60. https://doi.org/10.1109/TGRS.2021.3124839

Field, D., Garmestani, H., Khraishi, T., & Zikry, M. (2022). Journal of Engineering Materials and Technology. Journal of Engineering Materials and Technology, Transactions of the ASME, 144(1). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85127599106&partnerID=MN8TOARS

Field, D., Garmestani, H., Khraishi, T., & Zikry, M. (2022, January 1). Special Issue: The Behavior of Crystalline Materials: In Honor of Professor Hussein Zbib. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol. 144. https://doi.org/10.1115/1.4052487

Didarul Islam, M., Perera, H., Chockalingam, S., Phillips, M., Chen, M.-J., Liu, Y., … Eun Ryu, J. (2022). Template-free scalable fabrication of linearly periodic microstructures by controlling ribbing defects phenomenon during forward roll coating. Manufacturing Letters, 33, 153–160. https://doi.org/10.1016/j.mfglet.2022.08.001

Islam, M. D., Perera, H., Black, B., Phillips, M., Chen, M. J., Hodges, G., … Ryu, J. E. (2022). Template‐Free Scalable Fabrication of Linearly Periodic Microstructures by Controlling Ribbing Defects Phenomenon in Forward Roll Coating for Multifunctional Applications. Advanced Materials Interfaces, 9(27), 2201237. https://doi.org/10.1002/admi.202201237

Granger, L., Chen, M.-J., Brenner, D., & Zikry, M. (2022). The Challenges of Modeling Defect Behavior and Plasticity across Spatial and Temporal Scales: A Case Study of Metal Bilayer Impact. METALS, 12(12). https://doi.org/10.3390/met12122036

Mohamed, I., Hasan, T., & Zikry, M. A. (2022). Thermomechanical Microstructural Predictions of Fracture Nucleation of Zircaloy-4 Alloys With delta and e Hydride Distributions. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 144(1). https://doi.org/10.1115/1.4051687

Mohamed, I., & Zikry, M. A. (2021). Correction to: Modeling of the microstructural behavior of hydrided zirconium alloys (Computational Mechanics, (2021), 68, 3, (567-578), 10.1007/s00466-020-01970-7). Computational Mechanics, 68(3), 579. https://doi.org/10.1007/s00466-021-02043-z

Mohamed, I., & Zikry, M. A. (2021). Modeling of the microstructural behavior of hydrided zirconium alloys. COMPUTATIONAL MECHANICS, 68(3), 567–578. https://doi.org/10.1007/s00466-020-01970-7

Bond, D. M., & Zikry, M. A. (2020). Effects of electron beam manufacturing induced defects on fracture in Inconel 718. ADDITIVE MANUFACTURING, 32. https://doi.org/10.1016/j.addma.2020.101059

Ziaei, S., Wu, Q., Fitch, J., Elbadry, M., & Zikry, M. A. (2019). Channel Cracking and Interfacial Delamination of Indium Tin Oxide (ITO) Nano-Sized Films on Polyethylene Terephthalate (PET) Substrates: Experiments and Modeling. EXPERIMENTAL MECHANICS, 59(5), 703–712. https://doi.org/10.1007/s11340-019-00534-y

Ziaei, S., & Zikry, M. A. (2019). How semi-coherent b.c.c. hydride interfacial interactions affect the inelastic deformation and fracture behavior of h.c.p. zirconium alloys. MECHANICS OF MATERIALS, 130, 1–8. https://doi.org/10.1016/j.mechmat.2018.12.015

Motta, A. T., Capolungo, L., Chen, L.-Q., Cinbiz, M. N., Daymond, M. R., Koss, D. A., … Zikry, M. A. (2019). [Review of Hydrogen in zirconium alloys: A review]. JOURNAL OF NUCLEAR MATERIALS, 518, 440–460. https://doi.org/10.1016/j.jnucmat.2019.02.042

Hasan, T. S., Ziaei, S., & Zikry, M. A. (2019). Microstructural Modeling of the Mechanical Behavior of Face-Centered Cubic Nanocrystalline-Twinned Systems. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A(2), 609–615. https://doi.org/10.1007/s11661-018-5008-2

Mailen, R. W., Wagner, C. H., Bang, R. S., Zikry, M., Dickey, M. D., & Genzer, J. (2019). Thermo-mechanical transformation of shape memory polymers from initially flat discs to bowls and saddles. SMART MATERIALS AND STRUCTURES, 28(4). https://doi.org/10.1088/1361-665X/ab030a

Bond, D. M., & Zikry, M. A. (2018). Differentiating between intergranular and transgranular fracture in polycrystalline aggregates. JOURNAL OF MATERIALS SCIENCE, 53(8), 5786–5798. https://doi.org/10.1007/s10853-017-1847-2

Chen, M., Zirky, M. A., & Steer, M. B. (2018). Microwave Excitation of Crystalline Energetic Composites. IEEE ACCESS, 6. https://doi.org/10.1109/ACCESS.2018.2810265

Bond, D. M., & Zikry, M. A. (2017). A Predictive Framework for Dislocation-Density Pile-Ups in Crystalline Systems With Coincident Site Lattice and Random Grain Boundaries. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 139(2). https://doi.org/10.1115/1.4035494

Mailen, R. W., Dickey, M. D., Genzer, J., & Zikry, M. A. (2017). A fully coupled thermo-viscoelastic finite element model for self-folding shape memory polymer sheets. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 55(16), 1207–1219. https://doi.org/10.1002/polb.24372

Hubbard, A. M., Mailen, R. W., Zikry, M. A., Dickey, M. D., & Genzer, J. (2017). Controllable curvature from planar polymer sheets in response to light. Soft Matter, 13(12), 2299–2308. https://doi.org/10.1039/C7SM00088J

Mailen, R. W., Dickey, M. D., Genzer, J., & Zikry, M. (2017). Effects of thermo-mechanical behavior and hinge geometry on folding response of shape memory polymer sheets. JOURNAL OF APPLIED PHYSICS, 122(19). https://doi.org/10.1063/1.5000040

Bond, D. M., & Zikry, M. A. (2017). Microstructural Modeling of Intergranular Fracture in Tricrystals With Random Low- and High-Angle Grain Boundaries. JOM, 69(5), 856–862. https://doi.org/10.1007/s11837-017-2291-0

Zhao, B., & Zikry, M. A. (2017). Oxidation-induced failure in semi-crystalline organic thin films. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 109, 72–83. https://doi.org/10.1016/j.ijsolstr.2017.01.008

Chen, M., Steer, M. B., & Zikry, M. (2017). Significance of randomness in establishing hotspots in crystals. Southeastcon 2017. https://doi.org/10.1109/secon.2017.7925394

Zhao, B., Awartani, O., O'Connor, B., & Zikry, M. A. (2016). A direct correlation of x-ray diffraction orientation distributions to the in-plane stiffness of semi-crystalline organic semiconducting films. APPLIED PHYSICS LETTERS, 108(18). https://doi.org/10.1063/1.4948533

Awartani, O. M., Zhao, B., Currie, T., Kline, R. J., Zikry, M. A., & Brendan T. O'Connor. (2016). Anisotropic Elastic Modulus of Oriented Regioregular Poly(3-hexylthiophene) Films. MACROMOLECULES, 49(1), 327–333. https://doi.org/10.1021/acs.macromol.5b02680

Brown, J. A., & Zikry, M. A. (2016). Coupled infrared laser-thermo-mechanical response of RDX-PCTFE energetic aggregates. COMPUTATIONAL MECHANICS, 57(4), 611–628. https://doi.org/10.1007/s00466-015-1241-3

Khanikar, P., Wu, Q., & Zikry, M. A. (2016). Dynamic Fracture of Aluminum-Bonded Composites. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 138(3). https://doi.org/10.1115/1.4033036

Fan, R., Zhao, K., Ren, D., & Zikry, M. A. (2016). Effect of pulse current on the mechanical properties and fracture behaviors of Al-Mg alloys. Zhongguo Kexue Jishu Kexue/Scientia Sinica Technologica, 46(7), 717–721. https://doi.org/10.1360/N092016-00098

Zhao, B., Awartani, O., O'Connor, B., & Zikry, M. A. (2016). Microstructural Behavior and Failure Mechanisms of Organic Semicrystalline Thin Film Blends. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 54(9), 896–907. https://doi.org/10.1002/polb.23991

Brown, J. A., Bond, D. M., & Zikry, M. A. (2016). Microstructural Modeling of Coupled Electromagnetic-Thermo-Mechanical Response of Energetic Aggregates to Infrared Laser Radiation and Dynamic Fracture. MRS ADVANCES, 1(17), 1197–1202. https://doi.org/10.1557/adv.2015.56

Wu, Q., & Zikry, M. A. (2016). Microstructural modeling of transgranular and intergranular fracture in crystalline materials with coincident site lattice grain-boundaries: Sigma 3 and Sigma 17b bicrystals. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 661, 32–39. https://doi.org/10.1016/j.msea.2016.02.039

Ziaei, S., & Zikry, M. A. (2016). The effects of twins on the large strain deformation and fracture of hexagonal close packed crystalline materials. ACTA MATERIALIA, 120, 435–442. https://doi.org/10.1016/j.actamat.2016.08.059

Brown, J. A., & Zikry, M. A. (2015). Behaviour of crystalline-amorphous interfaces in energetic aggregates subjected to coupled thermomechanical and laser loading. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 471(2184). https://doi.org/10.1098/rspa.2015.0548

LaBarbera, D. A., & Zikry, M. A. (2015). Dynamic fracture and local failure mechanisms in heterogeneous RDX-Estane energetic aggregates. JOURNAL OF MATERIALS SCIENCE, 50(16), 5549–5561. https://doi.org/10.1007/s10853-015-9102-1

Wu, Q., & Zikry, M. A. (2015). Dynamic fracture predictions of microstructural mechanisms and characteristics in martensitic steels. ENGINEERING FRACTURE MECHANICS, 145, 54–66. https://doi.org/10.1016/j.engfracmech.2015.06.002

Brown, J. A., & Zikry, M. A. (2015). Effect of microstructure on the coupled electromagnetic-thermo-mechanical response of cyclotrimethylenetrinitramine-estane energetic aggregates to infrared laser radiation. JOURNAL OF APPLIED PHYSICS, 118(12). https://doi.org/10.1063/1.4931379

LaBarbera, D. A., & Zikry, M. A. (2015). Heterogeneous thermo-mechanical behavior and hot spot formation in RDX-estane energetic aggregates. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 62, 91–103. https://doi.org/10.1016/j.ijsolstr.2015.02.007

Lam, L. M., & Zikry, M. A. (2015). Identifying and controlling the behavior of gold nanoparticle-DNA superlattice systems. Journal of Computational and Theoretical Nanoscience, 12(8), 1761–1769. https://doi.org/10.1166/jctn.2015.3955

LaBarbera, D. A., & Zikry, M. A. (2015). Interfacial effects on fracture nucleation and propagation in crystalline-amorphous energetic material systems. COMPUTATIONAL MATERIALS SCIENCE, 104, 10–22. https://doi.org/10.1016/j.commatsci.2015.03.038

Shanthraj, P., & Zikry, M. A. (2015). Microstructural behavior and fracture in crystalline materials: Overview. In Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures (pp. 419–452). https://doi.org/10.1007/978-1-4614-5589-9

Lam, L. M., & Zikry, M. A. (2015). Modeling and predicting the mechanical strength and stability of DNA-modified gold nanoparticle systems. Journal of Computational and Theoretical Nanoscience, 12(11), 4539–4548. https://doi.org/10.1166/jctn.2015.4398

Ziaei, S., & Zikry, M. A. (2015, October). Modeling the Effects of Dislocation-Density Interaction, Generation, and Recovery on the Behavior of HCP Materials. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 46A, pp. 4478–4490. https://doi.org/10.1007/s11661-014-2635-0

Mailen, R. W., Liu, Y., Dickey, M. D., Zikry, M., & Genzer, J. (2015). Modelling of shape memory polymer sheets that self-fold in response to localized heating. SOFT MATTER, 11(39), 7827–7834. https://doi.org/10.1039/c5sm01681a

Ziaei, S., Wu, Q., & Zikry, M. A. (2015). Orientation relationships between coherent interfaces in hcp-fcc systems subjected to high strain-rate deformation and fracture modes. JOURNAL OF MATERIALS RESEARCH, 30(15), 2348–2359. https://doi.org/10.1557/jmr.2015.207

Wu, Q., & Zikry, M. A. (2015). Prediction of diffusion assisted hydrogen embrittlement failure in high strength martensitic steels. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 85, 143–159. https://doi.org/10.1016/j.jmps.2015.08.010

Zhao, B., & Zikry, M. A. (2015). The effects of structural disorders and microstructural mechanisms on semi-crystalline P3HT behavior. POLYMER, 57, 1–11. https://doi.org/10.1016/j.polymer.2014.12.003

Webb, S., Shin, P., Peters, K., Zikry, M. A., Stan, N., Chadderdon, S., … Schultz, S. (2014). Characterization of fatigue damage in adhesively bonded lap joints through dynamic, full-spectral interrogation of fiber Bragg grating sensors: 1. Experiments. SMART MATERIALS AND STRUCTURES, 23(2). https://doi.org/10.1088/0964-1726/23/2/025016

Webb, S., Shin, P., Peters, K., Zikry, M. A., Stan, N., Chadderdon, S., … Schultz, S. (2014). Characterization of fatigue damage in adhesively bonded lap joints through dynamic, full-spectral interrogation of fiber Bragg grating sensors: 2. Simulations. SMART MATERIALS AND STRUCTURES, 23(2). https://doi.org/10.1088/0964-1726/23/2/025017

Zikry, M. (2014). Editorial. Journal of Engineering Materials and Technology, 136(1). https://doi.org/10.1115/1.4026012

Khanikar, P., Liu, Y., & Zikry, M. (2014). Experimental and computational investigation of the dynamic behavior of Al-Cu-Li alloys. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 604, 67–77. https://doi.org/10.1016/j.msea.2014.02.089

Webb, S., Peters, K., Zikry, M., Stan, N., Chadderdon, S., Selfridge, R., & Schultz, S. (2014). Fiber Bragg grating spectral features for structural health monitoring of composite structures. 23RD INTERNATIONAL CONFERENCE ON OPTICAL FIBRE SENSORS, Vol. 9157. https://doi.org/10.1117/12.2059625

Khanikar, P., & Zikry, M. A. (2014). High strain-rate interfacial behavior of layered metallic composites. MECHANICS OF MATERIALS, 77, 52–66. https://doi.org/10.1016/j.mechmat.2014.07.008

Stan, N., Bailey, D. C., Chadderdon, S. L., Webb, S., Zikry, M., Peters, K. J., … Schultz, S. M. (2014). Increasing dynamic range of a fibre Bragg grating edge-filtering interrogator with a proportional control loop. MEASUREMENT SCIENCE AND TECHNOLOGY, 25(6). https://doi.org/10.1088/0957-0233/25/6/065206

Brown, J. A., LaBarbera, D. A., & Zikry, M. A. (2014). Laser interaction effects of electromagnetic absorption and microstructural defects on hot-spot formation in RDX-PCTFE energetic aggregates. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 22(5). https://doi.org/10.1088/0965-0393/22/5/055013

Wu, Q., & Zikry, M. A. (2014). Microstructural modeling of crack nucleation and propagation in high strength martensitic steels. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 51(25-26), 4345–4356. https://doi.org/10.1016/j.ijsolstr.2014.08.021

Lee, W. M., & Zikry, M. A. (2014). Microstructurally induced computational and material instabilities. INTERNATIONAL JOURNAL OF PLASTICITY, 52, 95–104. https://doi.org/10.1016/j.ijplas.2013.06.011

Zhao, B., Awartani, O., O’Connor, B. T., & Zikry, M. A. (2014). Modeling the mechanical behavior of P3HT/fullerene blends for photovoltaic applications. Journal of the Gilded Age and Progressive Era, 1628(2). https://doi.org/10.1557/opl.2014.128

Khanikar, P., & Zikry, M. A. (2014). Predictions of High Strain Rate Failure Modes in Layered Aluminum Composites. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A(1), 60–71. https://doi.org/10.1007/s11661-013-2016-0

Lee, W. M., Mazzoleni, A. P., & Zikry, M. A. (2013). Aerodynamic effects on the accuracy of an end-over-end kick of an American football. Sports Engineering, 16(2), 99–113. https://doi.org/10.1007/S12283-012-0110-Y

Webb, S., Shin, P., Peters, K., Zikry, M. A., Chadderdon, S., Stan, N., … Schultz, S. (2013). Characterization of fatigue damage in adhesively bonded lap joints through dynamic, full-spectral interrogation of fiber Bragg grating sensors. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS INTEGRATION 2013, Vol. 8693. https://doi.org/10.1117/12.2010018

Webb, S., Shin, P., Peters, K., Zikry, M., Schultz, S., & Selfridge, R. (2013). Characterization of fatigue damage in adhesively bonded lap joints through dynamic, full-spectral interrogation of fiber bragg grating sensors. Structural Health Monitoring 2013, Vols 1 and 2, 1953–1960.

Xu, S., Rezvanian, O., & Zikry, M. A. (2013). Electro-mechanical modeling of the piezoresistive response of carbon nanotube polymer composites. SMART MATERIALS AND STRUCTURES, 22(5). https://doi.org/10.1088/0964-1726/22/5/055032

Xu, S., Rezvanian, O., & Zikry, M. A. (2013). Electrothermomechanical Modeling and Analyses of Carbon Nanotube Polymer Composites. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 135(2). https://doi.org/10.1115/1.4023912

Pearson, J. D., LaBarbera, D., Prabhugoud, M., Peters, K., & Zikry, M. A. (2013). Experimental and Computational Investigation of Low-Impact Velocity and Quasi-Static Failure of PMMA. EXPERIMENTAL MECHANICS, 53(1), 53–66. https://doi.org/10.1007/s11340-012-9650-0

Webb, S., Peters, K., Zikry, M. A., Chadderdon, S., Nikola, S., Selfridge, R., & Schultz, S. (2013). Full-Spectral Interrogation of Fiber Bragg Grating Sensors Exposed to Steady-State Vibration. EXPERIMENTAL MECHANICS, 53(4), 513–530. https://doi.org/10.1007/s11340-012-9661-x

Stan, N., Bailey, D., Chadderdon, S., Selfridge, R. H., Schultz, S. M., Webb, S., … Zikry, M. (2013). High dynamic range high sensitivity FBG interrogation. Proceedings of SPIE - The International Society for Optical Engineering, 8694. https://doi.org/10.1117/12.2009875

Labarbera, D., & Zikry, M. A. (2013). Microstructural behavior of energetic crystalline aggregates. Materials Research Society Symposium Proceedings, 1526, 24–29. https://doi.org/10.1557/opl.2013.503

Shanthraj, P., & Zikry, M. A. (2013). Microstructurally induced fracture nucleation and propagation in martensitic steels. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 61(4), 1091–1105. https://doi.org/10.1016/j.jmps.2012.11.006

Wu, Q., Shanthraj, P., & Zikry, M. (2013). Modeling the heterogeneous effects of retained austenite on the behavior of martensitic high strength steels. International Journal of Fracture, 184(1-2), 241–252. https://doi.org/10.1007/978-3-319-04397-5_16

Wu, Q., Shanthraj, P., & Zikry, M. A. (2013). Modeling the heterogeneous effects of retained austenite on the behavior of martensitic high strength steels. International Journal of Fracture, 184(1-2), 241–252. https://doi.org/10.1007/S10704-013-9879-3

LaBarbera, D. A., & Zikry, M. A. (2013). The effects of microstructural defects on hot spot formation in cyclotrimethylenetrinitramine-polychlorotrifluoroethylene energetic aggregates. JOURNAL OF APPLIED PHYSICS, 113(24). https://doi.org/10.1063/1.4811684

Shanthraj, P., & Zikry, M. A. (2013). The effects of microstructure and morphology on fracture nucleation and propagation in martensitic steel alloys. MECHANICS OF MATERIALS, 58, 110–122. https://doi.org/10.1016/j.mechmat.2012.11.010

McLaughlin, L. A., & Zikry, M. A. (2013). The mechanics and stability of gold nanoparticle-oligo-ligand-DNA systems. Materials Research Society Symposium Proceedings, 1513, 6–11. https://doi.org/10.1557/opl.2013.501

Xu, S., Rezvanian, O., Peters, K., & Zikry, M. A. (2013). The viability and limitations of percolation theory in modeling the electrical behavior of carbon nanotube-polymer composites. NANOTECHNOLOGY, 24(15). https://doi.org/10.1088/0957-4484/24/15/155706

Dongare, A. M., LaMattina, B., Irving, D. L., Rajendran, A. M., Zikry, M. A., & Brenner, D. W. (2012). An angular-dependent embedded atom method (A-EAM) interatomic potential to model thermodynamic and mechanical behavior of Al/Si composite materials. Modelling and Simulation in Materials Science and Engineering, 20(3), 035007. https://doi.org/10.1088/0965-0393/20/3/035007

Shanthraj, P., & Zikry, M. A. (2012). Dislocation-density mechanisms for void interactions in crystalline materials. INTERNATIONAL JOURNAL OF PLASTICITY, 34, 154–163. https://doi.org/10.1016/j.ijplas.2012.01.008

Lee, W. M., & Zikry, M. A. (2012). Dispersed particle and triple junction interactions in aluminum alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 535, 264–273. https://doi.org/10.1016/j.msea.2011.12.081

Elkhodary, K. I., & Zikry, M. A. (2012). Dynamic crack nucleation and propagation in polycrystalline aluminum aggregates subjected to large inelastic deformations. INTERNATIONAL JOURNAL OF FRACTURE, 175(2), 95–108. https://doi.org/10.1007/s10704-012-9705-3

Elkhodary, K. I., & Zikry, M. A. (2012). Dynamic crack nucleation, propagation, and interactions with crystalline secondary phases in aluminum alloys subjected to large deformations. PHILOSOPHICAL MAGAZINE, 92(32), 3920–3949. https://doi.org/10.1080/14786435.2012.700126

Webb, S., Peters, K., Zikry, M. A., Chadderdon, S., Nikola, S., Selfridge, R., & Schultz, S. (2012). Full-spectral interrogation of fiber Bragg grating sensors for measurements of damage during steady-state vibration. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS INTEGRATION 2012, Vol. 8346. https://doi.org/10.1117/12.915150

Webb, S. C., Peters, K. J., Zikry, M. A., Chadderdon, S., Stan, N., Schultz, S. M., & Selfridge, R. H. (2012). Full-spectral interrogation of fiber bragg grating sensors for damage identification. International SAMPE Technical Conference. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84863888345&partnerID=MN8TOARS

Lee, W. M., & Zikry, M. A. (2012). High strain-rate modeling of the interfacial effects of dispersed particles in high strength aluminum alloys. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 49(23-24), 3291–3300. https://doi.org/10.1016/j.ijsolstr.2012.07.003

Stan, N., Chadderdon, S., Selfridge, R. H., Schultz, S. M., Webb, S., Peters, K. J., & Zikry, M. (2012). High-speed full-spectrum interrogation of Fiber Bragg Grating sensor application in reducing sensor strain sensitivity. Proceedings of SPIE - The International Society for Optical Engineering, 8347. https://doi.org/10.1117/12.914751

Xu, S., Rezvanian, O., Peters, K., & Zikry, M. A. (2012). Microstructural modeling of electrical behavior in CNT polymer composites. Materials Research Society Symposium Proceedings, 1420, 36–41. https://doi.org/10.1557/opl.2012.504

Lee, W. M., & Zikry, M. A. (2012). Modeling the interfacial plastic strain incompatibilities associated with dispersed particles in high strength aluminum alloys. ACTA MATERIALIA, 60(4), 1669–1679. https://doi.org/10.1016/j.actamat.2011.11.058

Shanthraj, P., & Zikry, M. A. (2012). Optimal microstructures for martensitic steels. JOURNAL OF MATERIALS RESEARCH, 27(12), 1598–1611. https://doi.org/10.1557/jmr.2012.127

Salem, H. G., Lee, W. M., Bodelot, L., Ravichandran, G., & Zikry, M. A. (2012). Quasi-Static and High-Strain-Rate Experimental Microstructural Investigation of a High-Strength Aluminum Alloy. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 43A(6), 1895–1901. https://doi.org/10.1007/s11661-011-1064-6

Elkhodary, K. I., & Zikry, M. A. (2011). A fracture criterion for finitely deforming crystalline solids-The dynamic fracture of single crystals. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 59(10), 2007–2022. https://doi.org/10.1016/j.jmps.2011.07.004

Hatem, T. M., & Zikry, M. A. (2011). A model for determining initial dislocation-densities associated with martensitic transformations. MATERIALS SCIENCE AND TECHNOLOGY, 27(10), 1570–1573. https://doi.org/10.1179/1743284711y.0000000079

Rezvanian, O., & Zikry, M. A. (2011). Continuum modeling of large-strain deformation modes in gold nanowires. JOURNAL OF MATERIALS RESEARCH, 26(17), 2286–2292. https://doi.org/10.1557/jmr.2011.148

Elkhodary, K., Lee, W., Sun, L. P., Brenner, D. W., & Zikry, M. A. (2011). Deformation mechanisms of an Omega precipitate in a high-strength aluminum alloy subjected to high strain rates. JOURNAL OF MATERIALS RESEARCH, 26(4), 487–497. https://doi.org/10.1557/jmr.2010.29

Shanthraj, P., & Zikry, M. A. (2011). Dislocation density evolution and interactions in crystalline materials. Acta Materialia, 59(20), 7695–7702. https://doi.org/10.1016/j.actamat.2011.08.041

Dongare, A. M., Rajendran, A. M., Lamattina, B., Zikry, M. A., & Brenner, D. W. (2011). Dynamic failure behavior of nanocrystalline Cu at atomic scales. Computers, Materials and Continua, 24(1), 43–60. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-80155206327&partnerID=MN8TOARS

Shanthraj, P., Rezvanian, O., & Zikry, M. A. (2011). Electrothermomechanical Finite-Element Modeling of Metal Microcontacts in MEMS. JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 20(2), 371–382. https://doi.org/10.1109/jmems.2010.2100020

Webb, S., Noevere, A., Peters, K., Zikry, M. A., Vella, T., Chadderdon, S., … Schultz, S. (2011). Full-spectral interrogation of fiber Bragg grating sensors for damage identification. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2011, Vol. 7982. https://doi.org/10.1117/12.881093

Chadderdon, S., Selfridge, R., Schultz, S., Webb, S., Park, C., Peters, K., & Zikry, M. (2011). High-speed full-spectrum fiber Bragg gratings interrogator system and testing. Proceedings of SPIE - The International Society for Optical Engineering, 7753. https://doi.org/10.1117/12.885138

Pearson, J. D., & Zikry, M. A. (2011). Indentation and contact mechanics of nanocrystalline diamond crystals: A hierarchical molecular dynamics and finite-element approach. Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. https://doi.org/10.2514/6.2011-1925

Lee, W. M., & Zikry, M. A. (2011). Microstructural Characterization of a High-Strength Aluminum Alloy Subjected to High Strain-Rate Impact. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 42A(5), 1215–1221. https://doi.org/10.1007/s11661-010-0476-z

Shanthraj, P., Hatem, T. M., & Zikry, M. A. (2011). Microstructural modeling of failure modes in martensitic steel alloys. Materials Research Society Symposium Proceedings, 1296, 56–61. https://doi.org/10.1557/opl.2011.1446

Shi, J., & Zikry, M. A. (2011). Modeling of grain boundary transmission, emission, absorption and overall crystalline behavior in Sigma 1, Sigma 3, and Sigma 17b bicrystals. JOURNAL OF MATERIALS RESEARCH, 26(14), 1676–1687. https://doi.org/10.1557/jmr.2011.192

Xu, S., Rezvanian, O., Peters, K., & Zikry, M. A. (2011). Tunneling effects and electrical conductivity of CNT polymer composites. Materials Research Society Symposium Proceedings, 1304, 50–56. https://doi.org/10.1557/opl.2011.606

Webb, S., Peters, K., Zikry, M., Vella, T., Chadderdon, S., Selfridge, R., & Schultz, S. (2011). Wavelength hopping due to spectral distortion in dynamic fiber Bragg grating sensor measurements. Measurement Science and Technology, 22(6), 065301. https://doi.org/10.1088/0957-0233/22/6/065301

Dongare, A. M., Rajendran, A. M., LaMattina, B., Zikry, M. A., & Brenner, D. W. (2010). Atomic scale studies of spall behavior in nanocrystalline Cu. Journal of Applied Physics, 108(11), 113518. https://doi.org/10.1063/1.3517827

Dongare, A. M., Rajendran, A. M., Lamattina, B., Brenner, D. W., & Zikry, M. A. (2010). Atomic-Scale Study of Plastic-Yield Criterion in Nanocrystalline Cu at High Strain Rates. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 41A(2), 523–531. https://doi.org/10.1007/s11661-009-0113-x

Hatem, T. M., & Zikry, M. A. (2010). Deformation and failure of single-packets in martensitic steels. Computers, Materials and Continua, 17(2), 127–147. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-78349278902&partnerID=MN8TOARS

Elkhodary, K., Lee, W., Cheeseman, B., Sun, L. P., Brenner, D. W., & Zikry, M. A. (2010). Deformation of precipitate platelets in high strength aluminum alloys under high strain-rate compression. TMS Annual Meeting, 2, 47–52. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-77952596072&partnerID=MN8TOARS

Hatem, T. M., & Zikry, M. A. (2010). Dynamic shear-strain localization and inclusion effects in lath martensitic steels subjected to high pressure loads. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 58(8), 1057–1072. https://doi.org/10.1016/j.jmps.2010.04.009

Ingle, N. P., King, M. W., & Zikry, M. A. (2010). Finite element analysis of barbed sutures in skin and tendon tissues. Journal of Biomechanics, 43(5), 879–886. https://doi.org/10.1016/j.jbiomech.2009.11.012

Vella, T., Chadderdon, S., Selfridge, R., Schultz, S., Webb, S., Park, C., … Zikry, M. (2010, September). Full-spectrum interrogation of fiber Bragg gratings at 100 kHz for detection of impact loading. MEASUREMENT SCIENCE AND TECHNOLOGY, Vol. 21. https://doi.org/10.1088/0957-0233/21/9/094009

Chadderdon, S., Vella, T., Selfridge, R., Schultz, S., Webb, S., Park, C., … Zikry, M. (2010). High-speed full-spectrum interrogation of fiber Bragg gratings for composite impact sensing. Proceedings of SPIE - The International Society for Optical Engineering, 7648. https://doi.org/10.1117/12.847662

Webb, S., Peters, K., Zikry, M. A., Vella, T., Chadderdon, S., Selfridge, R., & Schultz, S. (2010). Impact induced damage assessment in composite laminates through embedded fiber Bragg gratings. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2010, Vol. 7648. https://doi.org/10.1117/12.847543

Park, C., Peters, K., Zikry, M., Haber, T., Schultz, S., & Selfridge, R. (2010). Peak wavelength interrogation of fiber Bragg grating sensors during impact events. SMART MATERIALS AND STRUCTURES, 19(4). https://doi.org/10.1088/0964-1726/19/4/045015

Dongare, A. M., Rajendran, A. M., LaMattina, B., Zikry, M. A., & Brenner, D. W. (2010). Tension–compression asymmetry in nanocrystalline Cu: High strain rate vs. quasi-static deformation. Computational Materials Science, 49(2), 260–265. https://doi.org/10.1016/j.commatsci.2010.05.004

Park, C., Peters, K., & Zikry, M. (2010). The Effects of Embedded Optical Fiber Density on the Impact Response and Lifetime of Laminated Composites. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 21(18), 1819–1829. https://doi.org/10.1177/1045389x10390250

Park, C., Peters, K., & Zikry, M. (2010). The Role of Embedded Sensors in Damage Assessment of Composite Laminates. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2010, Vol. 7648. https://doi.org/10.1117/12.847634

Elkhodary, K., Lee, W., Cheeseman, B., Sun, L., Brenner, D., & Zikry, M. (2010). The effects of precipitates and Mn-bearing particles on the high strain-rate compression of high strength aluminum. Materials Research Society Symposium Proceedings, 1225, 19–23. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-79952052398&partnerID=MN8TOARS

Rezvanian, O., & Zikry, M. A. (2010). Thermo-mechanical modeling of RF MEMS devices. 2010 3rd International Conference on Thermal Issues in Emerging Technologies, Theory and Applications - Proceedings, ThETA3 2010, 63–67. https://doi.org/10.1109/THETA.2010.5766380

Dongare, A. M., Rajendran, A. M., LaMattina, B., Zikry, M. A., Brenner, D. W., Elert, M., … Butler, W. T. (2009). ATOMISTIC STUDIES OF VOID-GROWTH BASED YIELD CRITERIA IN SINGLE CRYSTAL CU AT HIGH STRAIN RATES. 1195, 769–772. https://doi.org/10.1063/1.3295254

Propst, A., Peters, K., Zikry, M. A., Schultz, S., Kunzler, W., Zhu, Z., … Selfridge, R. (2009). Assessment of damage in composite laminates through dynamic, full-spectral interrogation of fiber Bragg grating sensors. Smart Materials and Structures, 19(1), 015016. https://doi.org/10.1088/0964-1726/19/1/015016

Dongare, A. M., Rajendran, A. M., LaMattina, B., Zikry, M. A., & Brenner, D. W. (2009). Atomic scale simulations of ductile failure micromechanisms in nanocrystalline Cu at high strain rates. PHYSICAL REVIEW B, 80(10). https://doi.org/10.1103/physrevb.80.104108

Pearson, J. D., Zikry, M. A., & Wahl, K. (2009, June 15). Computational design of thin-film nanocomposite coatings for optimized stress and velocity accommodation response. WEAR, Vol. 267, pp. 1137–1145. https://doi.org/10.1016/j.wear.2008.11.027

Hatem, T. M., & Zikry, M. A. (2009). Dislocation density crystalline plasticity modeling of lath martensitic microstructures in steel alloys. PHILOSOPHICAL MAGAZINE, 89(33), 3087–3109. https://doi.org/10.1080/14786430903185999

Propst, A., Peters, K., Zikry, M. A., Kunzler, W., Zhu, Z., Wirthlin, M., … Schultz, S. (2009). Dynamic, full-spectral interrogation of fiber bragg grating sensors for impact testing of composite laminates. Proceedings of SPIE - The International Society for Optical Engineering, 7503. https://doi.org/10.1117/12.835406

Sun, L., Irving, D. L., Zikry, M. A., & Brenner, D. W. (2009). First-principles investigation of the structure and synergistic chemical bonding of Ag and Mg at the Al vertical bar Omega interface in a Al-Cu-Mg-Ag alloy. ACTA MATERIALIA, 57(12), 3522–3528. https://doi.org/10.1016/j.actamat.2009.04.006

Schultz, S., Kunzler, W., Zhu, Z., Wirthlin, M., Selfridge, R., Propst, A., … Peters, K. (2009). Full-spectrum interrogation of fiber Bragg grating sensors for dynamic measurements in composite laminates. SMART MATERIALS AND STRUCTURES, 18(11). https://doi.org/10.1088/0964-1726/18/11/115015

Shi, J., & Zikry, M. A. (2009). Grain size, grain boundary sliding, and grain boundary interaction effects on nanocrystalline behavior. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 520(1-2), 121–133. https://doi.org/10.1016/j.msea.2009.05.012

Shi, J., & Zikry, M. A. (2009). Grain-boundary interactions and orientation effects on crack behavior in polycrystalline aggregates. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 46(21), 3914–3925. https://doi.org/10.1016/j.ijsolstr.2009.07.019

Kunzler, W., Zhu, Z., Wirthlin, M., Selfridge, R., Schultz, S., Propst, A., … Zikry, M. (2009). High repetition-rate full-spectrum interrogation of FBG sensors for dynamic measurements in composite laminates. Proceedings of SPIE - The International Society for Optical Engineering, 7293. https://doi.org/10.1117/12.816384

Garrett, R. C., Peters, K. J., & Zikry, M. A. (2009). In-situ impact-induced damage assessment of woven composite laminates through a fibre Bragg grating sensor network. The Aeronautical Journal, 113(1144), 357–370. https://doi.org/10.1017/S0001924000003031

Rezvanian, O., & Zikry, M. (2009). Inelastic contact behavior of crystalline asperities in rf MEMS devices. Journal of Engineering Materials and Technology, 131(1), 0110021–01100210. https://doi.org/10.1115/1.3026545

Elkhodary, K., Sun, L., Irving, D. L., Brenner, D. W., Ravichandran, G., & Zikry, M. (2009). Integrated experimental, atomistic, and microstructurally based finite element investigation of the dynamic compressive behavior of 2139 aluminum. Journal of Applied Mechanics, Transactions ASME, 76(5), 1–9. https://doi.org/10.1115/1.3129769

Pearson, J. D., Zikry, M. A., & Wahl, K. J. (2009). Microstructural modeling of adaptive nanocomposite coatings for durability and wear. WEAR, 266(9-10), 1003–1012. https://doi.org/10.1016/j.wear.2009.02.004

Ma, J. B., & Zikry, M. A. (2009). Microstructural modeling of nanoidentational polycrsytalline gold with random high angle grain-boundaries. Reviews on Advanced Materials Science, 19(1-2), 78–92. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-64649089133&partnerID=MN8TOARS

Hatem, T. M., & Zikry, M. A. (2009). Microstructural modelling of failure modes in crystalline materials. 12th International Conference on Fracture 2009, ICF-12, 8, 5923–5932. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84869835552&partnerID=MN8TOARS

Hatem, T. M., & Zikry, M. A. (2009). Modeling of Lath Martensitic Microstructures and Failure Evolution in Steel Alloys. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 131(4). https://doi.org/10.1115/1.3183780

Ma, J. B., & Zikry, M. A. (2009). Nanoindentation and microstructural evolution of polycrystalline gold. JOURNAL OF MATERIALS RESEARCH, 24(3), 1093–1104. https://doi.org/10.1557/jmr.2009.0133

Pearson, J. D., Gao, G., Zikry, M. A., & Harrison, J. A. (2009). Nanoindentation of model diamond nanocomposites: Hierarchical molecular dynamics and finite-element simulations. COMPUTATIONAL MATERIALS SCIENCE, 47(1), 1–11. https://doi.org/10.1016/j.commatsci.2009.06.007

Pan, L., Dawson, B., Krim, J., Baker, C., Pearson, J., Zikry, M., & Vovoedin, A. (2009). Nanoscale design of adaptive tribological coatings. 2008 Proceedings of the STLE/ASME International Joint Tribology Conference, IJTC 2008, 65–67. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-70349869620&partnerID=MN8TOARS

Krim, J., Dawson, B. D., Barefoot, K., Pan, L., Pearson, J., Zikry, M., … Voevodin, A. (2009). Nanoscale design of adaptive tribological coatings for gold-ytrium based nanocomposites. Tribology - Materials, Surfaces and Interfaces, 3(4), 145–150. https://doi.org/10.1179/175158309X12586382418373

Propst, A., Garrett, R., Park, C., Peters, K., & Zikry, M. (2009). Sensor networks for in-situ failure identification in woven composites. SMASIS 2009, vol 2, 7293, 477–485. https://doi.org/10.1117/12.815743

Park, C., Propst, A., Peters, K., & Zikry, M. A. (2009). Sensor networks for in-situ failure identification in woven composites. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2009, SMASIS2009, 2, 477–485. https://doi.org/10.1115/SMASIS2009-1283

Hatem, T. M., & Zikry, M. A. (2009). Shear pipe effects and dynamic shear-strain localization in martensitic steels. ACTA MATERIALIA, 57(15), 4558–4567. https://doi.org/10.1016/j.actamat.2009.06.028

Brown, C., Rezvanian, O., Zikry, M. A., & Krim, J. (2009). Temperature dependence of asperity contact and contact resistance in gold RF MEMS switches. Journal of Micromechanics and Microengineering, 19(2), 025006. https://doi.org/10.1088/0960-1317/19/2/025006

Jawad, F. F., & Zikry, M. A. (2009). The Effects of Grain-boundary Orientations on Failure Behavior in FCC Polycrystalline Systems. INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 18(4), 341–369. https://doi.org/10.1177/1056789508097547

Dongare, A. M., Rajendran, A., LaMattina, B., Zikry, M., & Brenner, D. W. (2008). Atomic scale simulations of orientation of loading axis on the growth of voids at the onset of ductile failure in single crystal Cu. Materials Research Society Symposium Proceedings, 1137, 162–167. https://doi.org/10.1557/proc-1137-ee08-09-w10-09

Propst, A., Parker, A., Capps, Z., Peters, K., & Zikry, M. A. (2008). Damage monitoring in woven composites using fiber-Bragg grating sensors on multiple time scales. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2008, 2, 185–191. https://doi.org/10.1115/SMASIS2008-527

Elkhodary, K. I., Salem, H. G., & Zikry, M. A. (2008). Equal channel angular pressing of canned 2124-Al compacts: Processing, experiments, and modeling. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 39A(9), 2184–2192. https://doi.org/10.1007/s11661-008-9541-2

Elkhodary, K., Lee, W., Cheeseman, B., Brenner, D. W., & Zikry, M. A. (2008). High strain-rate behavior of high strength aluminum alloys. Materials Research Society Symposium Proceedings, 1137, 143–148. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-70450123718&partnerID=MN8TOARS

Garret, R., Peters, K., & Zikry, M. (2008). In-situ impact induced damage assessment of woven composite laminates through a FBG sensor network. Proceedings of the 4th European Workshop on Structural Health Monitoring, 825–832. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-62949086365&partnerID=MN8TOARS

Rezvanian, O., Zikry, M. A., & Rajendran, A. M. (2008, October 25). Microstructural modeling in f.c.c. crystalline materials in a unified dislocation-density framework. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 494, pp. 80–85. https://doi.org/10.1016/j.msea.2007.10.091

Shi, J., Zikry, M. A., & Hatem, T. M. (2008). Microstructural modeling of failure in polycrystalline materials. Advances in Heterogeneous Material Mechanics 2008 - Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, ICHMM 2008, 3–8. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-56649102273&partnerID=MN8TOARS

Rezvanian, O., & Zikry, M. A. (2008). Modeling of large strain deformation and failure modes in crystalline aggregates. TMS Annual Meeting, 129–134. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-51649122510&partnerID=MN8TOARS

Crill, J. W., Irving, D., Padgett, C., Zikry, M., & Brenner, D. (2008). Modeling the Effect of Varying Electrical Voltage on the Plastic Deformation of a Single Asperity in Hot-Switched RF MEMS Contacts. Materials Research Society Symposium Proceedings, 1137, 185–190. https://doi.org/10.1557/proc-1137-ee10-15

Rezvanian, O., Zikry, M. A., Brown, C., & Krim, J. (2008). RF MEMS behavior, surface roughness and asperity contact. Materials Research Society Symposium Proceedings, 1052, 135–140. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-45849129829&partnerID=MN8TOARS

Garrett, R., Peters, K., & Zikry, M. A. (2008). Sensor networks for in-situ failure identification in woven composites throughout impact. ASME International Mechanical Engineering Congress and Exposition, Proceedings, 10 PART A, 203–210. https://doi.org/10.1115/IMECE2007-42737

Rezvanian, O., Brown, C., Zikry, M. A., Kingon, A. I., Krim, J., Irving, D. L., & Brenner, D. W. (2008). The role of creep in the time-dependent resistance of Ohmic gold contacts in radio frequency microelectromechanical system devices. Journal of Applied Physics, 104(2), 024513. https://doi.org/10.1063/1.2953072

Zhao, W., Dusche, G., Zikry, M. A., Chopra, S., Ozturk, M. C., & Rozgonyi, G. (2007). Correlation of local strain in a TEM sample and in the bulk for a recesses SiGe CMOS structure. ECS Transactions, 6(1), 23–30. https://doi.org/10.1149/1.2727384

Pearson, J. D., Zikry, M. A., Prabhugoud, M., & Peters, K. (2007). Global-local assessment of low-velocity impact damage in woven composites. JOURNAL OF COMPOSITE MATERIALS, 41(23), 2759–2783. https://doi.org/10.1177/0021998307078734

Ma, J. B., Zikry, M. A., Ashamwi, W. M., & Brenner, D. W. (2007). Hierarchical modeling of nanoindentation and microstructural evolution of face-centered cubic gold aggregates. JOURNAL OF MATERIALS RESEARCH, 22(3), 627–643. https://doi.org/10.1557/JMR.2007.0076

Pearson, J., Prabhugoud, M., Zikry, M., & Peters, K. (2007). In-situ failure identification in woven composites throughout impact. Proceedings of the Materials Division, The ASME Non-Destructive Evaluation Division and The ASME Pressure Vessels and Piping Division, 2006, 267–276. https://doi.org/10.1115/IMECE2006-15784

Prabhugoud, M., Peters, K., Pearson, J., & Zikry, M. A. (2007). Independent measurement of strain and sensor failure features in Bragg grating sensors through multiple mode coupling. SENSORS AND ACTUATORS A-PHYSICAL, 135(2), 433–442. https://doi.org/10.1016/j.sna.2006.08.021

Pearson, J. D., Zikry, M. A., Peters, K. J., & Prabhugoud, M. (2007). Local and global measurements of dynamic damage evolution in woven composite systems. ICCM International Conferences on Composite Materials. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85076867871&partnerID=MN8TOARS

Pearson, J. D., Zikry, M. A., Prabhugoud, M., & Peters, K. (2007). Measurement of low velocity and quasi-static failure modes in PMMA. POLYMER COMPOSITES, 28(3), 381–391. https://doi.org/10.1002/pc.20287

Garrett, R., Pearson, J., Peters, K., & Zikry, M. (2007). Optimization of fiber Bragg grating sensor configurations for in-situ failure identification in woven composites throughout impact. Proceedings of SPIE - The International Society for Optical Engineering, 6529 PART 2. https://doi.org/10.1117/12.715216

Zhao, W., Duscher, G., Rozgonyi, G., Zikry, M. A., Chopra, S., & Ozturk, M. C. (2007). Quantitative nanoscale local strain profiling in embedded SiGe metal-oxide-semiconductor structures. APPLIED PHYSICS LETTERS, 90(19). https://doi.org/10.1063/1.2738188

Zhao, W., Duscher, G., Zikry, M. A., & Rozgonyi, G. (2007). Reliable local strain characterization on Si/SiGe structures in biaxial tension. Materials Research Society Symposium Proceedings, 958, 151–157. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-34347252267&partnerID=MN8TOARS

Rezvanian, O., Zikry, M., & Rajendran, A. M. (2007). Statistically stored, geometrically necessary and grain boundary dislocation densities: microstructural representation and modelling. Philosophical Transactions of the Royal Society of London. Series A, Mathematical, Physical and Engineering Sciences, 463(2087), 2833–2853. https://doi.org/10.1098/rspa.2007.0020

Rezvanian, O., Zikry, M. A., Brown, C., & Krim, J. (2007). Surface roughness, asperity contact and gold RFMEMS switch behavior. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 17(10), 2006–2015. https://doi.org/10.1088/0960-1317/17/10/012

Pearson, J. D., Zikry, M. A., & Rezvanian, O. (2006). Computational modeling and design of adaptive thin-film composite coatings. Materials Research Society Symposium Proceedings, 977, 85–90. https://doi.org/10.1557/proc-977-0977-ff08-10

Pearson, J., Prabhugoud, M., Zikry, M., & Peters, K. (2006). In-situ failure identification in woven composites throughout impact. American Society of Mechanical Engineers, Materials Division (Publication) MD. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84920632313&partnerID=MN8TOARS

Pearson, J., Prabhugoud, M., Zikry, M., & Peters, K. (2006). In-situ failure identification in woven composites throughout impact using fiber bragg grating sensors. Proceedings of SPIE - The International Society for Optical Engineering, 6174 II. https://doi.org/10.1117/12.657989

Shi, J., Zikry, M., & Hatem, T. M. (2006). Inelastic behavior and grain-boundary effects in polycrystalline materials. Materials Research Society Symposium Proceedings, 978, 333–338. https://doi.org/10.1557/proc-978-0978-gg12-07-ee08-07

Zhao, W., Duscher, G., Zikry, M. A., & Rozgonyi, G. (2006). Local strain characterization on strained-Si/SiGe heterostructures with convergent beam electron diffraction and finite element simulation. ECS Transactions, 3(7), 333–338. https://doi.org/10.1149/1.2355831

Baucom, J. N., Zikry, M. A., & Rajendran, A. M. (2006). Low-velocity impact damage accumulation in woven S2-glass composite systems. COMPOSITES SCIENCE AND TECHNOLOGY, 66(10), 1229–1238. https://doi.org/10.1016/j.compscitech.2005.11.005

Rezvanian, O., Zikry, M. A., & Rajendran, A. M. (2006). Microstructural behavior and failure of FCC crystalline aggregates. Materials Research Society Symposium Proceedings, 976, 78–83. https://doi.org/10.1557/proc-976-0976-ee02-02

Rezvanian, O., Zikry, M. A., & Rajendran, A. M. (2006). Microstructural modeling of grain subdivision and large strain inhomogeneous deformation modes in f.c.c. crystalline materials. MECHANICS OF MATERIALS, 38(12), 1159–1169. https://doi.org/10.1016/j.mechmat.2005.12.006

Kameda, T., Zikry, M. A., & Rajendran, A. M. (2006). Modeling of grain-boundary effects and intergranular and transgranular failure in polycrystalline intermetallics. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 37A(7), 2107–2115. https://doi.org/10.1007/BF02586131

Rajendran, A. M., Ashmawi, W. M., & Zikry, M. A. (2006). The modeling of the shock response of powdered ceramic materials. COMPUTATIONAL MECHANICS, 38(1), 1–13. https://doi.org/10.1007/s00466-005-0712-3

Pearson, J., Prabhugoud, M., Zikry, M., & Peters, K. (2005). Damage progression identification in woven composites with fiber bragg grating sensors. American Society of Mechanical Engineers, Materials Division (Publication) MD, 100 MD, 49–57. https://doi.org/10.1115/IMECE2005-80487

Pearson, J., Prabhugoud, M., Zikry, M., Peters, K., Sitar, M., & Davis, L. (2005). Failure and damage identification in woven composites with fiber Bragg grating sensors. Proceedings of SPIE - The International Society for Optical Engineering, 5765(PART 1), 540–551. https://doi.org/10.1117/12.599771

Baucom, J. N., & Zikry, M. A. (2005). Low-velocity impact damage progression in woven E-glass composite systems. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 36(5), 658–664. https://doi.org/10.1016/j.compositesa.2004.07.008

Ma, J. B., Ashmawi, W., Zikry, M. A., Schall, D., & Brenner, D. W. (2005). Modeling of nanoindentation and microstructural ductile behavior in metallic material systems. Materials Research Society Symposium Proceedings, 841, 317–322. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-23844433619&partnerID=MN8TOARS

Prabhugoud, M., Pearson, J., Peters, K., & Zikry, M. (2005). Radiation and cladding modes as independent measurements of Bragg grating sensor integrity. Proceedings of SPIE - The International Society for Optical Engineering, 5758, 440–450. https://doi.org/10.1117/12.597782

Badr, H., M.Arif, A. F., Sheikh, A. K., Shuaib, A. N., Khan, Z., Khan, A. S., … Zikry, M. A. (2005). Theme issue on modeling of metal forming processes. Arabian Journal for Science and Engineering, 30(1 C). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-32544458475&partnerID=MN8TOARS

Bahei-El-Din, Y. A., Rajendran, A. M., & Zikry, M. A. (2004). A micromechanical model for damage progression in woven composite systems. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 41(9-10), 2307–2330. https://doi.org/10.1016/j.ijsolstr.2003.12.006

Prabhugoud, M., Pearson, J., Peters, K., & Zikry, M. (2004). Demonstration of failure identification methodology incorporating sensor degradation. Proceedings of SPIE - The International Society for Optical Engineering, 5391, 107–116. https://doi.org/10.1117/12.540093

Baucom, J. N., Zikry, M. A., & Qiu, Y. (2004). Dynamic and quasi-static failure evolution of 3D woven cellular composite systems. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 23(5), 471–481. https://doi.org/10.1177/0731684404032076

Baucom, J. N., & Zikry, M. A. (2004). Erratum: Evolution of failure mechanisms in 2D and 3D woven composite systems under quasi-static perforation (Journal of Composite Materials, 37, 18, (1651-1674) DOI: 10.1177/0021998304042170). Journal of Composite Materials, 38(6), 535. https://doi.org/10.1177/0021998304042170

Pearson, J., Prabhugoud, M., Zikry, M., & Peters, K. (2004). Failure identification methodology for woven composites incorporating sensor degradation. American Society of Mechanical Engineers, Materials Division (Publication) MD, 99, 31–40. https://doi.org/10.1115/IMECE2004-61802

Zikry, M. A., & Ashmawi, W. M. (2004). Failure modes and grain-boundary effects in polycrystalline materials. Materials Research Society Symposium - Proceedings, 819, 21–26. https://doi.org/10.1557/proc-819-n1.3

Ashmawi, W. M., Zikry, M. A., Wang, K., & Reeber, R. R. (2004). Modeling of residual stresses for thermally strained GaN/Al2O3 heterostructures. JOURNAL OF CRYSTAL GROWTH, 266(4), 415–422. https://doi.org/10.1016/j.jcrysgro.2004.02.105

Bahei-El-Din, Y. A., Rajendran, A. M., & Zikry, M. A. (2003). A material model for multi-scale analysis of textile composites. Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1, 685–690. https://doi.org/10.2514/6.2003-1476

Baucom, J. N., & Zikry, M. (2003). Evolution of failure mechanisms in 2D and 3D woven composite systems under quasi-static perforation. Journal of Composite Materials, 37(18), 1651–1674. https://doi.org/10.1177/002199803035178

Baucom, J. N., & Zikry, M. A. (2003). Evolution of failure mechanisms in 2D and 3D woven composite systems under quasi-static perforation. JOURNAL OF COMPOSITE MATERIALS, 37(18), 1651–1674. https://doi.org/10.1177/0021998303035178

Ashmawi, W. M., & Zikry, M. A. (2003). Grain boundary effects and void porosity evolution. MECHANICS OF MATERIALS, Vol. 35, pp. 537–552. https://doi.org/10.1016/S0167-6636(02)00269-7

Ashmawi, W. M., & Zikry, M. A. (2003). Grain-boundary interfaces and void interactions in porous aggregates. PHILOSOPHICAL MAGAZINE, Vol. 83, pp. 3917–3944. https://doi.org/10.1080/14786430310001599423

Bahei-El-Din, Y. A., & Zikry, M. A. (2003). Impact-induced deformation fields in 2D and 3D woven composites. COMPOSITES SCIENCE AND TECHNOLOGY, 63(7), 923–942. https://doi.org/10.1016/S0266-3538(03)00021-6

Bahei-El-Din, Y. A., Zikry, M. A., & Rajendran, A. M. (2003). Impact-induced deformation fields in 3D cellular woven composites. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 34(8), 765–778. https://doi.org/10.1016/S1359-835X(03)00143-X

Ashmawi, W. M., & Zikry, M. A. (2003). Single void morphological and grain-boundary effects on overall failure in FCC polycrystalline systems. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 343(1-2), 126–142. https://doi.org/10.1016/s0921-5093(02)00325-8

Bahei-El-Din, Y. A., Zikry, M. A., & Rajendran, A. (2002). Deformation fields in woven composite plates under impact. ASME International Mechanical Engineering Congress and Exposition, Proceedings, 41–45. https://doi.org/10.1115/IMECE2002-39482

Garg, D. P., Zikry, M. A., Anderson, G. L., & Stepp, D. (2002). Health monitoring and reliability of adaptive heterogeneous structures. Structural Health Monitoring, 1(1), 23–39. https://doi.org/10.1177/147592170200100103

Ashmawi, W. M., & Zikry, M. A. (2002). Prediction of grain-boundary interfacial mechanisms in polycrystalline materials. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 124(1), 88–96. https://doi.org/10.1115/1.1421611

Garg, D. P., Zikry, M. A., & Anderson, G. L. (2001). Current and potential future research activities in adaptive structures: an ARO perspective. SMART MATERIALS AND STRUCTURES, 10(4), 610–623. https://doi.org/10.1088/0964-1726/10/4/304

Baucom, J. N., Zikry, M. A., & Qiu, Y. (2001). Dynamic failure mechanisms in 3D cellular woven composite systems. American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 248, 117–123. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0242665316&partnerID=MN8TOARS

Qiu, Y. P., Xu, W., Wang, Y. J., Zikry, M. A., & Mohamed, M. H. (2001). Fabrication and characterization of three-dimensional cellular-matrix composites reinforced with woven carbon fabric. COMPOSITES SCIENCE AND TECHNOLOGY, 61(16), 2425–2435. https://doi.org/10.1016/S0266-3538(01)00164-6

Baucom, J. N., & Zikry, M. A. (2001). Impact-induced damage progression in 2-D and 3-D woven composite systems. American Society of Mechanical Engineers, Aerospace Division (Publication) AD, 66, 67–76. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0242410454&partnerID=MN8TOARS

Subhash, G., Sulibhavi, S., & Zikry, M. A. (2001). Influence of strain-rate on the uniaxial compressive behavior of 2-D braided textile composites. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 32(11), 1583–1591. https://doi.org/10.1016/S1359-835X(01)00011-2

Garg, D. P., Zikry, M. A., Anderson, G. L., & Stepp, D. (2001). Reliable adaptive structures via sensor integration: Research and development issues. 19th AIAA Applied Aerodynamics Conference, 3, 1918–1926. https://doi.org/10.2514/6.2001-1440

Garmestani, H., & Zikry, M. A. (2001). Special issue on: "Inelastic Deformation and Failure" in honor of Professor E.W. Hart on his 80th birthday - Editorial. INTERNATIONAL JOURNAL OF PLASTICITY, Vol. 17, pp. 1303–1304. https://doi.org/10.1016/S0749-6419(00)00085-1

Orsini, V. C., & Zikry, M. A. (2001). Void growth and interaction in crystalline materials. INTERNATIONAL JOURNAL OF PLASTICITY, 17(10), 1393–1417. https://doi.org/10.1016/S0749-6419(00)00091-7

Baucom, J. N., Zikry, M. A., & Qiu, Y. (2000). Control of failure evolution in 3D cellular woven composite systems. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2000-G, 59–65. https://doi.org/10.1115/IMECE2000-2155

Ashmawi, W. M., & Zikry, M. A. (2000). Effects of grain boundaries and dislocation density evolution on large strain deformation modes in fcc crystalline materials. JOURNAL OF COMPUTER-AIDED MATERIALS DESIGN, 7(1), 55–62. https://doi.org/10.1023/A:1008717428264

Zikry, M. A., Pothier, M. R., & Baucom, J. N. (2000). High strain-rate shear-strain localization in f.c.c. crystalline materials: a perturbation analysis. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 37(43), 6177–6202. https://doi.org/10.1016/S0020-7683(99)00266-8

Ashmawi, W. M., & Zikry, M. A. (2000). Microstructurally induced ductile deformation mechanisms and grain-boundary effects in polycrystalline aggregates. Materials Research Society Symposium - Proceedings, 578, 339–344. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0033697993&partnerID=MN8TOARS

Flanagan, M. P., Zikry, M. A., Wall, J. W., & El-Shiekh, A. (1999). An experimental investigation of high velocity impact and penetration failure modes in textile composites. JOURNAL OF COMPOSITE MATERIALS, 33(12), 1080–1103. https://doi.org/10.1177/002199839903301202

Baucom, J. N., & Zikry, M. A. (1999). Perturbation analysis of high strain-rate shear localization in BCC crystalline materials. ACTA MECHANICA, 137(1-2), 109–129. https://doi.org/10.1007/BF01313148

Zikry, M. A., & Kameda, T. (1998, May). Inelastic three dimensional high strain-rate dislocation density based analysis of grain-boundary effects and failure modes in ordered intermetallics. MECHANICS OF MATERIALS, Vol. 28, pp. 93–102. https://doi.org/10.1016/S0167-6636(97)00026-4

Kameda, T., & Zikry, M. A. (1998). Intergranular and transgranular crack growth at triple junction boundaries in ordered intermetallics. INTERNATIONAL JOURNAL OF PLASTICITY, Vol. 14, pp. 689–702. https://doi.org/10.1016/S0749-6419(98)00017-5

Zikry, M. A., & Garmestani, H. (1998). Special issue: Deformation and failure modes in multiphase materials. International Journal of Plasticity, 14(8), 671.

Kameda, T., & Zikry, M. A. (1998). Three dimensional dislocation-based crystalline constitutive formulation for ordered intermetallics. SCRIPTA MATERIALIA, 38(4), 631–636. https://doi.org/10.1016/s1359-6462(97)00512-5

Zikry, M. A., & Kao, M. (1997). Inelastic microstructural failure modes in crystalline materials: The Sigma 33a and Sigma 11 high angle grain boundaries. INTERNATIONAL JOURNAL OF PLASTICITY, 13(4), 403–434. https://doi.org/10.1016/S0749-6419(97)80006-X

Zikry, M. A., & Kao, M. (1996). Dislocation based multiple-slip crystalline constitutive formulation for finite-strain plasticity. Scripta Materialia, 34(7), 1115–1121. https://doi.org/10.1016/1359-6462(95)00629-X

Zikry, M. A., & Kao, M. (1996). Inelastic microstructural failure mechanisms in crystalline materials with high angle grain boundaries. Journal of the Mechanics and Physics of Solids, 44(11), 1765–1798. https://doi.org/10.1016/0022-5096(96)00049-X

Zikry, M. A., & Kao, M. (1995). Grain-boundary effects and failure mechanisms in crystalline materials. American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 212, 107–128. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0029427840&partnerID=MN8TOARS

Zikry, M. A., & Kao, M. (1995). Large-scale crystal plasticity computations of microstructural failure modes. Computing Systems in Engineering, 6(3), 225–240. https://doi.org/10.1016/0956-0521(95)00024-T

Zikry, M. A., & Kao, M. (1995). Microstructural failure mechanisms in crystalline materials. American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 200, 143–163. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0028994195&partnerID=MN8TOARS

Zikry, M. A. (1994). An accurate and stable algorithm for high strain-rate finite strain plasticity. Computers and Structures, 50(3), 337–350. https://doi.org/10.1016/0045-7949(94)90004-3

Zikry, M. A. (1994). Dynamic void collapse and material failure mechanisms in metallic crystals. Mechanics of Materials, 17(2-3), 273–288. https://doi.org/10.1016/0167-6636(94)90065-5

Zikry, M. A., & Kao, M. (1994). High angle grain boundary effects and microstructural failure mechanisms in crystalline materials. American Society of Mechanical Engineers, Aerospace Division (Publication) AD, 42, 71–101. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0028731415&partnerID=MN8TOARS

Zikry, M. A. (1993). Failure modes in cubic crystalline materials. American Society of Mechanical Engineers, Aerospace Division (Publication) AD, 36, 199–210. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0027853243&partnerID=MN8TOARS

Zikry, M. A. (1992). High strain-rate failure mechanisms in single crystals. American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 132, 265–279. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0026479668&partnerID=MN8TOARS

Zikry, M. A., & Nemat-Nasser, S. (1990). High strain-rate localization and failure of crystalline materials. Mechanics of Materials, 10(3), 215–237. https://doi.org/10.1016/0167-6636(90)90044-G