2024 journal article

Impact of weave architecture on the mechanical performance of carbon-aramid/PVB hybrid composites

Journal of Engineered Fibers and Fabrics.

Contributors: K. Shaker *, A. Abbas *, Y. Nawab* , M. Umair *, M. Khan *, Z. Zubair *, H. Awais *

Source: ORCID
Added: March 15, 2024

Continuous fiber-reinforced thermoplastic composites having superior mechanical properties are preferred for lightweight architectures. Rising demands for enhanced mechanical performance under certain types of loadings have focused researchers toward the hybridization of composite materials. In this study carbon and aramid fibers were employed to produce hybrid fabrics by weaving in two different woven architectures, 1/1 plain and 2/1 twill. Polyvinyl butyral (PVB) matrix was reinforced with these woven fabrics and hybrid composites were fabricated by compression molding. Un-hybrid carbon and aramid composites were fabricated using PVB matrix, as control samples. Tensile characteristics of hybrid composites offered intermediate strain at failures of 0.5% due to the combined rigid and ductile natures of carbon and aramid, respectively. Flexural strength and absorbed impact energy (200 MPa and 97 kJ/m2) were higher for hybrid composites, and quick elastic recoveries were experienced in hybrid composites after impact. Plain woven reinforced hybridization had about 25% and 5% lower tensile and flexural characteristics respectively, as more interlocking zones of warp and weft yarns reduced strength. However, these interlocking zones positively contributed to impact performance by 11.5% higher energy absorption.