Meghna Das Chaudhury

Characteristics of Hydrogen-Piloted, Premixed Ammonia/Air Flames in a Swirl-Stabilized Gas Turbine Can Combustor: A Numerical Study

Chaudhury, M. D., & Ekkad, S. V. (2026, January 8). AIAA SCITECH 2026 Forum, Vol. 1.

Numerical Study of Premixed NH3 Flames in a Microscale Swirl Burner With an H2 Pilot Flame at Increased Pressures

Phengsomphone, A., Sahoo, A., Chaudhury, M. D., Ekkad, S. V., & Narayanaswamy, V. (2026, January 8). AIAA SCITECH 2026 Forum, Vol. 1.

Combustion Characteristics of Premixed Ammonia/Methane/Air Blends as an Alternative Fuel in a Swirl-Stabilized Gas Turbine Can Combustor Sustained Using a Pilot Flame

Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, 1(4).

AN INVESTIGATION OF PILOT-ASSISTED PREMIXED AMMONIA/METHANE/AIR BLENDS AS ALTERNATIVE FUELS IN A SWIRL-STABILIZED GAS TURBINE COMBUSTOR

International Journal of Energy for a Clean Environment, 25(8), 15–39.

Characteristics of Premixed Ammonia/Methane/Air Blends As an Alternative Fuel in a Swirl-Stabilized Gas Turbine Combustor Under Varying Pilot Percentage

Characteristics of Premixed Ammonia/Methane/Air Blends as an Alternative Fuel in a Swirl-Stabilized Gas Turbine Combustor Under Varying Pilot Percentage

Journal of Engineering for Gas Turbines and Power, 146(11).

Characteristics of Premixed Ammonia/Hydrogen/Methane Blends as an Alternative Fuel in a Swirl Stabilized Gas Turbine Combustor with Sustained Pilot

Presented at the AIAA SCITECH 2023 Forum.

Combustor Wall Heat Transfer and Emission Characteristics of Premixed Ammonia/Methane/Air Blends in a Swirl Stabilized Gas Turbine Combustor

Investigating the nature of Pilot-Assisted Premixed Ammonia/Methane/Air blends as an Alternative Fuel in a Swirl Stabilized Gas Turbine Combustor: Flame Stability and Wall Heat Transfer Study

47th International Technical Conference on Clean Energy. Presented at the 47th International Technical Conference on Clean Energy, Clearwater, Florida.

Numerical Simulation of Premixed Ammonia/Methane/Air blends in a Swirl-Stabilized Gas Turbine Combustor

Presented at the AIAA SCITECH 2023 Forum.

Numerical Simulation of Heat Transfer and Fluid Flow Characteristics of Triangular Corrugated Wavy Channel

In H. K. Voruganti, K. K. Kumar, P. V. Krishna, & X. Jin (Eds.), Advances in Applied Mechanical Engineering (pp. 251–260).

Metallurgical changes of cryogenically treated Coated Carbide (KC-9225) and its performance during wet machining of Austenitic Stainless Steel – 310.

IOP Conference Series: Materials Science and Engineering, 502(1), 012192.

Numerical Simulation of Chilldown Process in Cryogenic Transportation Lines’

Numerical Simulation of Chilldown Process in Cryogenic Transportation Lines.’ 25th National and 3rd International Heat and Mass Transfer Conference (IHMTC 2019). Presented at the 25th National and 3rd International Heat and Mass Transfer Conference (IHMTC 2019), Indian Institute of Technology Roorkee, India.

A CFD analysis to show enhancement of heat transfer by CNT nanofluid in heat exchanger tubes at fully developed turbulent region’

A CFD analysis to show enhancement of heat transfer by CNT nanofluid in heat exchanger tubes at fully developed turbulent region.’ 1st International Conference on Mechanical Engineering (INCOM 2018). Presented at the 1st International Conference on Mechanical Engineering (INCOM 2018), Jadavpur University, India.

Aerodynamic Design of High-Speed Train by CFD analysis’, Spectrum

International Students’ Conference on ‘Emerging Trends in Science and Technology. Presented at the International Students’ Conference on ‘Emerging Trends in Science and Technology, Institute of Engineering and Management, Salt Lake City, UT.

Metallurgical changes of cryogenically treated Coated Carbide (KC-9225) and its performance during wet machining of Austenitic Stainless Steel – 310’

Metallurgical changes of cryogenically treated Coated Carbide (KC-9225) and its performance during wet machining of Austenitic Stainless Steel – 310.’ 5th National Conference on Refrigeration and Air-Conditioning. Presented at the 5th National Conference on Refrigeration and Air-Conditioning, National Institute of Technology, Suratkal, India.