Mark R Pankow

Dynamic measurement of ballistic impact using an optical fibre sensor

SMART MATERIALS AND STRUCTURES, 33(3).

Effect of fiber hybridization on tensile fracture of 3D woven textile composites

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 165.

Evaluation of Low-Cycle Impact Fatigue Damage in CFRPs using the Virtual Fields Method

Mendoza, I., Graham, A., Matejunas, A., Hodges, G., Siviour, C., Pankow, M., & Lamberson, L. (2023, August 3). JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS.

High strain rate response and mechanical performance of tantalum carbide-hafnium carbide solid solution

CERAMICS INTERNATIONAL, 49(23), 39099–39106.

High-speed polarization imaging for failure detection in fiber spinning

HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS XVII, Vol. 12488.

Impact of Joint Parameters on Performance of Self-Opening Dual-Matrix Composites

White, C., Firth, J., & Pankow, M. (2023, May 18). JOURNAL OF SPACECRAFT AND ROCKETS.

Modeling Micrometeoroid and Orbital Debris Impact on Composite Truss Tubes

THERMOMECHANICS & INFRARED IMAGING, INVERSE PROBLEM METHODOLOGIES AND MECHANICS OF ADDITIVE & ADVANCED MANUFACTURED MATERIALS, VOL 6, pp. 35–38.

Objective determination of peridynamic material parameters for fiber-reinforced composites with shear nonlinearity - Part 2: Strength properties and strain rate dependence

Baber, F., Hall, R., Justusson, B., Ranatunga, V., Schaefer, J., Pankow, M., & Guven, I. (2023, December 5). MECHANICS OF ADVANCED MATERIALS AND STRUCTURES.

Rate-dependent mechanical response of polypropylene nonwovens

Elamin, M., & Pankow, M. (2023, February 21). JOURNAL OF APPLIED POLYMER SCIENCE.

Ballistic loading and survivability of optical fiber sensing layers for soft body armor evaluation

OPTICAL FIBER TECHNOLOGY, 73.

Comparison of High-Speed Polarization Imaging Methods for Biological Tissues

SENSORS, 22(20).

Developing transmission mode for infrared matrix-assisted laser desorption electrospray ionization mass spectrometry imaging

RAPID COMMUNICATIONS IN MASS SPECTROMETRY, 36(22).

Next-Generation Infrared Matrix-Assisted Laser Desorption Electrospray Ionization Source for Mass Spectrometry Imaging and High-Throughput Screening

Knizner, K. T., Guymon, J. P., Garrard, K. P., Bouvree, G., Manni, J., Hauschild, J.-P., … Muddiman, D. C. (2022, September 29). JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY, Vol. 9.

Template‐Free Scalable Fabrication of Linearly Periodic Microstructures by Controlling Ribbing Defects Phenomenon in Forward Roll Coating for Multifunctional Applications

Advanced Materials Interfaces, 9(27), 2201237.

The Dynamic Response of Additively Manufactured Polymers Subjected to Tensile Loading

Chadwell, C., Rocco, A., & Pankow, M. (2022, December 20). JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS.

Understanding the role of bond point strain in the mechanical response of nonwoven polypropylene materials

Garmabi, A., Elamin, M. A., Bradford, P. D., & Pankow, M. (2022, April 6). JOURNAL OF COMPOSITE MATERIALS.

Dynamic back face deformation measurement with a single optical fibre

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 150.

The Influence of Powder Reuse on the Properties of Nickel Super Alloy ATI 718 (TM) in Laser Powder Bed Fusion Additive Manufacturing

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 52(2), 676–688.

Use of enriched shell elements compared to solid elements for modelling delamination growth during impact on composites

COMPOSITE STRUCTURES, 269.

Validation of an efficient finite element analysis approach for simulation of low velocity impact and compression strength after impact response

COMPOSITE STRUCTURES, 255.

A structural-based computational model of tendon-bone insertion tissues

MATHEMATICAL BIOSCIENCES, 327.

Analysis of Self-Organized Patterned Surface Oxide Spots on Ejected Spatter Produced during Laser Powder Bed Fusion

Additive Manufacturing, 35, 101320.

Minimal Unpowered Strain-Energy Deployment Mechanism for Rollable Spacecraft Booms: Ground Test

JOURNAL OF SPACECRAFT AND ROCKETS, Vol. 57, pp. 346–353.

Performance evaluation of two progressive damage models for composite laminates under various speed impact loading

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 143.

Survivability of integrated fiber Bragg grating sensors in ballistic protection fabrics for high velocity impact testing

OPTICAL FIBER TECHNOLOGY, 60.

Advanced Dual-Pull Mechanism for Deployable Spacecraft Booms

JOURNAL OF SPACECRAFT AND ROCKETS, Vol. 56, pp. 569–576.

High-Speed Interrogation Approach for FBG Sensors Using a VCSEL Array Swept Source

IEEE SENSORS JOURNAL, 19(21), 9766–9774.

Shape reconstruction of woven fabrics using fiber bragg grating strain sensors

SMART MATERIALS AND STRUCTURES, 28(12).

Soft body armor time-dependent back face deformation (BFD) with ballistics gel backing

COMPOSITE STRUCTURES, 220, 687–698.

Strain state dependent anisotropic viscoelasticity of tendon-to-bone insertion

Mathematical Biosciences, 308, 1–7.

The effect of the through-thickness yarn component on the in- and out-of-plane properties of composites from 3D orthogonal woven preforms

JOURNAL OF THE TEXTILE INSTITUTE, 110(3), 317–327.

A generalized analytical model for predicting the tensile behavior of 3D orthogonal woven composites using finite deformation approach

JOURNAL OF THE TEXTILE INSTITUTE, 109(11), 1465–1476.

Dynamic Characterization of Textile Composites Part I: Uniaxial Tension

Journal of Dynamic Behavior of Materials, 4(3), 258–267.

Dynamic Characterization of Textile Composites Part II: Bi-axial Tension

Journal of Dynamic Behavior of Materials, 4(3), 268–281.

High-speed polarization imaging of dynamic collagen fiber realignment in tendon-to-bone insertion region

Journal of Biomedical Optics, 23(11), 1.

A spectral profile multiplexed FBG sensor network with application to strain measurement in a Kevlar woven fabric

SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2017, Vol. 10168.

Composition and structure of porcine digital flexor tendon-bone insertion tissues

Journal of Biomedical Materials Research Part A, 105(11), 3050–3058.

Dynamic Polarization Microscopy for In-Situ Measurements of Collagen Fiber Realignment During Impact

MECHANICS OF BIOLOGICAL SYSTEMS AND MATERIALS, VOL 6, pp. 61–66.

Exploring how optimal composite design is influenced by model fidelity and multiple objectives

COMPOSITE STRUCTURES, 160, 964–975.

High-speed 3D digital image correlation of low-velocity impacts on composite plates

COMPOSITES PART B-ENGINEERING, 131, 153–164.

Interaction of delaminations and matrix cracks in a CFRP plate, Part I: A test method for model validation

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 103, 314–326.

Interaction of delaminations and matrix cracks in a CFRP plate, Part II: Simulation using an enriched shell finite element model

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 103, 252–262.

Interrogation of a spectral profile division multiplexed FBG sensor network using a modified particle swarm optimization method

MEASUREMENT SCIENCE AND TECHNOLOGY, 28(5).

Modeling of 3D woven composites using the digital element approach for accurate prediction of kinking under compressive loads

COMPOSITE STRUCTURES, 160, 547–559.

Dynamic Failure Mechanisms in Woven Ceramic Fabric Reinforced Metal Matrix Composites During Ballistic Impact

In Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 9 (pp. 155–159).

Dynamic failure mechanisms in woven ceramic fabric reinforced metal matrix composites during ballistic impact

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems, vol 9, 155–159.

Point of impact: the effect of size and speed on puncture mechanics

INTERFACE FOCUS, 6(3).

Simulation of High Rate Failure Mechanisms in Composites During Quasi-static Testing

In Conference Proceedings of the Society for Experimental Mechanics Series (pp. 445–450).

Simulation of high rate failure mechanisms in composites during quasi-static testing

Mechanics of composite and multifunctional materials, vol 7, 445–450.

Split Hopkinson bar measurement using high-speed full-spectrum fiber Bragg grating interrogation

APPLIED OPTICS, 55(25), 7179–7185.

Ballistic impact behavior of woven ceramic fabric reinforced metal matrix composites

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 86, 57–66.

Characterization of delamination in translaminar reinforced composites due to low velocity impact

Proceedings of the American Society for Composites: Thirtieth Technical Conference, 381–392.

High-speed 3D digital image correlation of low-velocity impacts on composite plates

Proceedings of the American Society for Composites: Thirtieth Technical Conference, 2120–2135.

Modeling of 3D woven composites with realistic geometry for accurate prediction of kinking under compressive loads

Proceedings of the American Society for Composites: Thirtieth Technical Conference, 593–612.

Student simulation challenge: A competition-based composites education opportunity

Proceedings of the American Society for Composites: Thirtieth Technical Conference, 1160–1170.

Top down design using Bayesian network classifiers for composite panels

Proceedings of the American Society for Composites: Thirtieth Technical Conference, 468–475.

Hybrid Three-Dimensional (3-D) Woven Thick Composite Architectures in Bending

JOM, 66(2), 255–260.

Comparison of 2D and 3D composites to confined crush loading

Proceedings of the American Society for Composites.

Use of a shock tube to determine the bi-axial yield of an aluminum alloy under high rates

International Journal of Impact Engineering, 58, 55–65.

Modeling the response, strength and degradation of 3D woven composites subjected to high rate loading

Composite Structures, 94(5), 1590–1604.

Resistance to delamination of 3D woven textile composites evaluated using End Notch Flexure (ENF) tests: Cohesive zone based computational results

Composites Part A: Applied Science and Manufacturing, 42(12), 1863–1872.

Resistance to delamination of 3D woven textile composites evaluated using End Notch Flexure (ENF) tests: Experimental results

Composites Part A: Applied Science and Manufacturing, 42(10), 1463–1476.

Shock loading of 3D woven composites: A validated finite element investigation

Composite Structures, 93(5), 1347–1362.

Shock response of 3D woven composites: An experimental investigation

Composite Structures, 93(5), 1337–1346.

Split Hopkinson pressure bar testing of 3D woven composites

Composites Science and Technology, 71(9), 1196–1208.

A new lamination theory for layered textile composites that account for manufacturing induced effects

Composites Part A: Applied Science and Manufacturing, 40(12), 1991–2003.