Philip David Bradford

Multilayer Core-Shell Fiber Device for Improved Strain Sensing and Supercapacitor Applications

Hossain, M. M., Kungsadalpipob, P., He, N., Gao, W., & Bradford, P. (2024, July 6). SMALL.

Novel three-dimensional printed continuous Zylon yarn reinforced polylactic acid composites utilizing compatible sizing

Kungsadalpipob, P., Lubna, M. M., & Bradford, P. D. (2024, January 10). PROGRESS IN ADDITIVE MANUFACTURING.

Joint Theoretical and Experimental Study of Stress Graphitization in Aligned Carbon Nanotube/Carbon Matrix Composites

ACS APPLIED MATERIALS & INTERFACES, 15(27), 32656–32666.

Laser Doppler vibrometry measurements of acoustic attenuation in optical fiber waveguides

APPLIED OPTICS, 62(16), E119–E124.

Multifunctional and Washable Carbon Nanotube-Wrapped Textile Yarns for Wearable E-Textiles

Hossain, M. M., Lubna, M. M., & Bradford, P. D. (2023, January 9). ACS APPLIED MATERIALS & INTERFACES.

Adhesive free, conformable and washable carbon nanotube fabric electrodes for biosensing

NPJ FLEXIBLE ELECTRONICS, 6(1).

Development of hull material for high-altitude airship: A parametric study

Journal of Reinforced Plastics and Composites, 41(11-12), 444–458.

Electrospun Carbon Nanotube-Based Scaffolds Exhibit High Conductivity and Cytocompatibility for Tissue Engineering Applications

ACS OMEGA, 7(23), 20006–20019.

Interconnected cathode-electrolyte double-layer enabling continuous Li-ion conduction throughout solid-state Li-S battery

ENERGY STORAGE MATERIALS, 44, 136–144.

Microporous vertically aligned CNT nanocomposites with tunable properties for use in flexible heat sinks

JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES, 7(4).

Understanding the role of bond point strain in the mechanical response of nonwoven polypropylene materials

Garmabi, A., Elamin, M. A., Bradford, P. D., & Pankow, M. (2022, April 6). JOURNAL OF COMPOSITE MATERIALS.

Fabrication of scalable, aligned and low density carbon nanotube/silicon carbide hybrid foams by polysilazane infiltration and pyrolysis

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 41(6), 3303–3313.

Length-dependent carbon nanotube film structures and mechanical properties

NANOTECHNOLOGY, 32(26).

Low density, three-dimensionally interconnected carbon nanotube/silicon carbide nanocomposites for thermal protection applications

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 41(1), 233–243.

One-step fabrication of bulk nanocomposites reinforced by carbon nanotube array fragments

Aly, K., Aboubakr, S. H., & Bradford, P. D. (2021, October 21). POLYMER COMPOSITES, Vol. 10.

Toward Deterministic 3D Energy Storage Electrode Architectures via Electrodeposition of Molybdenum Oxide onto CNT Foams

ENERGY & FUELS, 35(19), 16183–16193.

Ultra-lightweight fiber-reinforced envelope material for high-altitude airship

The Journal of The Textile Institute, 113(9), 1799–1805.

Chemically interconnected ternary AgNP/polypyrrole/functionalized buckypaper composites as high-energy-density supercapacitor electrodes

CHEMICAL PHYSICS LETTERS, 739.

High temperature carbon nanotube - Nanofiber hybrid filters

SEPARATION AND PURIFICATION TECHNOLOGY, 236.

Iron-on carbon nanotube (CNT) thin films for biosensing E-Textile applications

CARBON, 168, 673–683.

Microfluidic Behavior of Alumina Nanotube-Based Pathways within Hydrophobic CNT Barriers

LANGMUIR, 36(30), 8792–8799.

Ultrasonic Lamb wave measurement sensitivity of aligned carbon nanotube coated fiber Bragg grating

JOURNAL OF PHYSICS-PHOTONICS, 2(1).

AgNP/crystalline PANI/EBP-composite-based supercapacitor electrode with internal chemical interactions

JOURNAL OF APPLIED POLYMER SCIENCE, 136(44).

Hybrid Carbon Nanotube Fabrics with Sacrificial Nanofibers for Flexible High Performance Lithium-Ion Battery Anodes

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 166(4), A473–A479.

Real-time impact damage sensing and localization in composites through embedded aligned carbon nanotube sheets

COMPOSITES PART B-ENGINEERING, 162, 522–531.

A silicon-impregnated carbon nanotube mat as a lithium-ion cell anode

JOURNAL OF APPLIED ELECTROCHEMISTRY, 48(1), 127–133.

Effect of continuous optical fiber bonding on ultrasonic detection using fiber Bragg grating

SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2018, Vol. 10598.

Experimental Study on Directionality of Ultrasonic Wave Coupling Using Surface-Bonded Fiber Bragg Grating Sensors

JOURNAL OF LIGHTWAVE TECHNOLOGY, 36(4), 932–938.

Laser-etch patterning of metal oxide coated carbon nanotube 3D architectures

NANOTECHNOLOGY, 29(33).

Modifying the morphology and properties of aligned CNT foams through secondary CNT growth

NANOTECHNOLOGY, 29(29).

Bi-directional ultrasonic wave coupling to FBGs in continuously bonded optical fiber sensing

APPLIED OPTICS, 56(25), 7262–7268.

Compressive piezoresistive behavior of carbon nanotube sheets embedded in woven glass fiber reinforced composites

COMPOSITES PART B-ENGINEERING, 116, 459–470.

Engineering biorefinery residues from loblolly pine for supercapacitor applications

CARBON, 120, 304–312.

Enhanced anisotropic response of dielectric elastomer actuators with microcombed and etched carbon nanotube sheet electrodes

CARBON, 120, 366–373.

Highly anisotropic magneto-transport and field orientation dependent oscillations in aligned carbon nanotube/epoxy composites

APPLIED PHYSICS LETTERS, 111(26).

Investigation of microcombing parameters in enhancing the properties of carbon nanotube yarns

MATERIALS & DESIGN, 134, 181–187.

Ion Beam Modification of Carbon Nanotube Yarn in Air and Vacuum

MATERIALS, 10(8).

Mechanisms of signal coupling to optical fiber for FBG sensor detection of Lamb waves

2017 25TH INTERNATIONAL CONFERENCE ON OPTICAL FIBER SENSORS (OFS), Vol. 10323.

Pyrolytic-carbon coating in carbon nanotube foams for better performance in supercapacitors

JOURNAL OF POWER SOURCES, 343, 492–501.

Radial growth of multi-walled carbon nanotubes in aligned sheets through cyclic carbon deposition and graphitization

CARBON, 111, 411–418.

Radiation-induced mechanical property changes of CNT yarn

Gigax, J. G., Bradford, P. D., & Shao, L. (2017, October 15). NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, Vol. 409, pp. 268–271.

Simulating increased Lamb wave detection sensitivity of surface bonded fiber Bragg grating

SMART MATERIALS AND STRUCTURES, 26(4).

Strong and resilient alumina nanotube and CNT/alumina hybrid foams with tuneable elastic properties

RSC ADVANCES, 7(45), 27923–27931.

Carbon nanotube shear-pressed sheet interleaves for Mode I interlaminar fracture toughness enhancement

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 80, 127–137.

Hierarchical multi-component nanofiber separators for lithium polysulfide capture in lithium-sulfur batteries: an experimental and molecular modeling study

JOURNAL OF MATERIALS CHEMISTRY A, 4(35), 13572–13581.

Increasing signal amplitude in fiber Bragg grating detection of Lamb waves using remote bonding

APPLIED OPTICS, 55(21), 5564–5569.

Microcombing enables high-performance carbon nanotube composites

COMPOSITES SCIENCE AND TECHNOLOGY, 123, 92–98.

Remarkably enhanced thermal transport based on a flexible horizontally-aligned carbon nanotube array film

SCIENTIFIC REPORTS, 6.

Sensitivity of contact-free fiber Bragg grating sensors to ultrasonic Lamb waves

SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2016, Vol. 9803.

Strain sensing in composites using aligned carbon nanotube sheets embedded in the interlaminar region

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 90, 536–548.

Ultralight Interconnected Metal Oxide Nanotube Networks

SMALL, 12(18), 2432–2438.

Ultralight Materials: Ultralight Interconnected Metal Oxide Nanotube Networks (Small 18/2016)

Small, 12(18), 2387–2387.

Woven Glass Fiber Composites with Aligned Carbon Nanotube Sheet Interlayers

JOURNAL OF NANOMATERIALS, 2016.

Aligned carbon nanotube sheet piezoresistive strain sensors

Li, A., Bogdanovich, A. E., & Bradford, P. D. (2015, September). SMART MATERIALS AND STRUCTURES, Vol. 24.

Carbon nanotube sheet electrodes for anisotropic actuation of dielectric elastomers

CARBON, 89, 113–120.

High performance carbon nanotube - polymer nanofiber hybrid fabrics

NANOSCALE, 7(40), 16744–16754.

Strong and Conductive Dry Carbon Nanotube Films by Microcombing

SMALL, 11(31), 3830–3836.

Ultralight anisotropic foams from layered aligned carbon nanotube sheets

NANOSCALE, 7(40), 17038–17047.

Chamber-confined silicon-carbon nanofiber composites for prolonged cycling life of Li-ion batteries

NANOSCALE, 6(13), 7489–7495.

Conformal Atomic Layer Deposition of Alumina on Millimeter Tall, Vertically-Aligned Carbon Nanotube Arrays

ACS APPLIED MATERIALS & INTERFACES, 6(21), 19135–19143.

Mechanical and electrical properties of aligned carbon nanotube/carbon matrix composites

CARBON, 75, 307–313.

Nanosized Ge@CNF, Ge@C@CNF and Ge@CNF@C composites via chemical vapour deposition method for use in advanced lithium-ion batteries

JOURNAL OF POWER SOURCES, 253, 366–372.

Stabilizing carbon nanotube yarns using chemical vapor infiltration

COMPOSITES SCIENCE AND TECHNOLOGY, 90, 82–87.

Structural annealing of carbon coated aligned multi-walled carbon nanotube sheets

Carbon, 79, 113–122.

Sulfur gradient-distributed CNF composite: a self-inhibiting cathode for binder-free lithium-sulfur batteries

CHEMICAL COMMUNICATIONS, 50(71), 10277–10280.

Aligned Carbon Nanotube-Silicon Sheets: A Novel Nano-architecture for Flexible Lithium Ion Battery Electrodes

ADVANCED MATERIALS, 25(36), 5109–5114.

Aligned carbon nanotube sheet high efficiency particulate air filters

CARBON, 64, 295–304.

Copper-Encapsulated Vertically Aligned Carbon Nanotube Arrays

ACS Applied Materials & Interfaces, 5(21), 10774–10781.

Effect of CVD carbon coatings on Si@CNF composite as anode for lithium-ion batteries

NANO ENERGY, 2(5), 976–986.

Poly(vinyl alcohol) reinforced with large-diameter carbon nanotubes via spray winding

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 43(4), 587–592.

Ultrastrong, Stiff and Multifunctional Carbon Nanotube Composites

Materials Research Letters, 1(1), 19–25.

Coating Alumina on Catalytic Iron Oxide Nanoparticles for Synthesizing Vertically Aligned Carbon Nanotube Arrays

ACS Applied Materials & Interfaces, 3(11), 4180–4184.

Mechanical and electrical property improvement in CNT/Nylon composites through drawing and stretching

COMPOSITES SCIENCE AND TECHNOLOGY, 71(14), 1677–1683.

Producing superior composites by winding carbon nanotubes onto a mandrel under a poly(vinyl alcohol) spray

CARBON, 49(14), 4786–4791.

Tuning the compressive mechanical properties of carbon nanotube foam

CARBON, 49(8), 2834–2841.

A novel approach to fabricate high volume fraction nanocomposites with long aligned carbon nanotubes

COMPOSITES SCIENCE AND TECHNOLOGY, 70(13), 1980–1985.

An intermetallic Fe-Zr catalyst used for growing long carbon nanotube arrays

MATERIALS LETTERS, 64(18), 1947–1950.

Carbon nanotube yarn and 3-D braid composites. Part I: Tensile testing and mechanical properties analysis

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 41(2), 230–237.

Carbon nanotube yarn and 3-D braid composites. Part II: Dynamic mechanical analysis

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 41(2), 238–246.

Carbon nanotube yarn strain sensors

NANOTECHNOLOGY, 21(30).

Electrical conductivity study of carbon nanotube yarns, 3-D hybrid braids and their composites

JOURNAL OF COMPOSITE MATERIALS, 42(15), 1533–1545.

Fabrication and mechanical characterization of carbon nanotube yarns, 3-D braids, and their composites

SAMPE Journal, 43(1), 6–19.