Mechanical and Aerospace Engineering

Impingement Cooling for Combustor Liner Backside Cooling

In R. Amano & B. Sunden (Eds.), Impingement jet cooling in gas turbines. WIT Press.

Characterization of the NASA Langley Arc Heated Scramjet Test Facility using NO PLIF

AIAA AVIATION 2014 - 30th AIAA Aerodynamic Measurement Technology and Ground Testing Conference.

Internal Cooling

Sand transport in a two pass internal cooling duct with rib turbulators

International Journal of Heat and Fluid Flow, 46, 158–167.

Study of microparticle rebound characteristics under high temperature conditions

Journal of Engineering for Gas Turbines and Power, 136(1).

Netl research efforts on development and integration of advanced material systems and airfoil cooling configurations for future land-based gas turbine engines

Proceedings of the ASME Turbo Expo, 6.

Heat transfer performance of a transonic turbine blade passage in presence of leakage flow through upstream slot and mateface gap with endwall contouring

Proceedings of the ASME Turbo Expo, 5B.

Evaluation of herringbone wavy fin based heat exchanger for heat transfer enhancement in automobile exhaust energy harvesting systems

Proceedings of the 15th International Heat Transfer Conference, IHTC 2014.

Effect of temperature on microparticle rebound characteristics at constant impact velocity

Proceedings of the ASME Turbo Expo, 1A.

Effect of near melting temperatures on microparticle sand rebound characteristics at constant impact velocity

Proceedings of the ASME Turbo Expo, 1A.

Aerodynamic performance of a transonic turbine blade passage in presence of upstream slot and mateface gap with endwall contouring

Proceedings of the ASME Turbo Expo, 2C.

Flow field and liner heat transfer for a model annular combustor equipped with radial swirlers

50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference 2014.

Experimental and computational analysis of film cooling hole performance on a high temperature test rig

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8B.

Evaluation of multi-louvered fin based heat exchangers for use in automobile exhaust energy harvesting systems

52nd AIAA Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition, SciTech 2014.

Effect of rotation on detailed heat transfer distribution for various rib geometries in developing channel flow

Journal of Heat Transfer, 136(1).

Effect of pin fin to channel height ratio and pin fin geometry on heat transfer performance for flow in rectangular channels

International Journal of Heat and Mass Transfer, 77, 359–368.

Direct-coupling simulation of thermal-hydraulic and stress analysis in a Cross-Wave primary surface heat exchanger

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8A.

Effects of hierarchical features on longevity of submerged superhydrophobic surfaces with parallel grooves

Physics of Fluids, 26(8), 082103.

Finite Element Analysis Project Proposal

Demonstration Software Modeling Exercise Aids Taiwan’s Yachtbuilding Community

High-Performance Composites, 22(3), 68–69.