College of Engineering
Displaying works 1 - 20 of 56 in total
Sorted by most recent date added to the index first, which may not be the same as publication date order.
1997 conference paper
Unsteady high turbulence effect on turbine blade film cooling heat transfer performance using a transient liquid crystal technique
NASA Conference Publication, (10195), 239–259. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031345037&partnerID=MN8TOARS
1997 journal article
Heat transfer coefficients over a flat surface with air and CO2 injection through compound angle holes using a transient liquid crystal image method
Journal of Turbomachinery, 119(3), 580–586.
1997 journal article
Film effectiveness over a flat surface with air and CO2injection through compound angle holes using a transient liquid crystal image method
Journal of Turbomachinery, 119(3), 587–593.
1997 journal article
Effect of unsteady wake with trailing edge coolant ejection on detailed heat transfer coefficient distributions for a gas turbine blade
Journal of Heat Transfer, 119(2), 242–248.
1997 conference paper
Effect of unsteady wake on detailed heat transfer coefficient and film effectiveness distributions for a gas turbine blade
Proceedings of the ASME Turbo Expo, 3.
1997 conference paper
Detailed heat transfer distributions on a cylindrical model with simulated TBC spallation
35th Aerospace Sciences Meeting and Exhibit. http://www.scopus.com/inward/record.url?eid=2-s2.0-84983098241&partnerID=MN8TOARS
1997 journal article
Detailed heat transfer distributions in two-pass square channels with rib turbulators
International Journal of Heat and Mass Transfer, 40(11), 2525–2537.
1997 conference paper
Detailed film cooling measurements over a gas turbine blade using a transient liquid crystal image technique
American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 350, 245–254. http://www.scopus.com/inward/record.url?eid=2-s2.0-4043123444&partnerID=MN8TOARS
1997 conference paper
Detailed film cooling measurements on a cylindrical leading edge model: Effect of free-stream turbulence and coolant density
American Society of Mechanical Engineers (Paper). http://www.scopus.com/inward/record.url?eid=2-s2.0-0031375134&partnerID=MN8TOARS
1997 journal article
Combined effect of grid turbulence and unsteady wake on film effectiveness and heat transfer coefficient of a gas turbine blade with air and CO2 film injection
Journal of Turbomachinery, 119(3), 594–600.
1997 journal article
Lateral diffusive migration of massive particles in high-velocity vertical pipe flow of moderately dense gas-solid suspensions
Physical Review E, 56(3), 2972–2980.
1997 conference paper
Optimum Manipulation Strategies for Limp Fabric Materials
Proceedings of the Fifth Pan American Congress of Applied Mechanics Conference. Presented at the Fifth Pan American Congress of Applied Mechanics Conference, San Juan, Puerto Rico.
Event: Fifth Pan American Congress of Applied Mechanics Conference at San Juan, Puerto Rico
1997 conference paper
Nonsmooth stabilization of an underactuated unstable two degrees of freedom mechanical system
Proceedings of the 36th IEEE Conference on Decision and Control. Presented at the 36th IEEE Conference on Decision and Control, San Diego, CA.
Event: 36th IEEE Conference on Decision and Control at San Diego, CA on December 12, 1997
1997 conference paper
Hybrid closed loop systems: a nonlinear control perspective
Proceedings of the 36th IEEE Conference on Decision and Control. Presented at the 36th IEEE Conference on Decision and Control, San Diego, CA.
Event: 36th IEEE Conference on Decision and Control at San Diego, CA on December 12, 1997
1997 conference paper
Feedback control of a flexible joint robot
1997 European Control Conference (ECC). Presented at the 1997 European Control Conference (ECC).
Event: 1997 European Control Conference (ECC)
1997 journal article
Exponential stabilization of an underactuated autonomous surface vessel
Automatica, 33(12), 2249–2254.
1997 journal article
Influence of die geometry on the workability of conversion coatings combined with soap lubricant in cold forming of steels
Journal of Materials Processing Technology, 63(1-3), 238–243.
1997 journal article
A new method based on simultaneous acoustic emission and in-situ sem observation to evaluate the fracture behavior of metal matrix composites
Scripta Materialia, 37(6), 801–808.
1997 journal article
A quasi-one-dimensional premixed flame model with cross-stream diffusion
Combustion and Flame, 110(3), 335–350.
1997 article
Characterization of adhesive strength of phosphate coatings in cold metal forming
Saiki, H., Ngaile, G., & Ruan, L. (1997, October). JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol. 119, pp. 667–671.