Mechanical and Aerospace Engineering

Case Studies of Air Filtration at Microscales: Micro- and Nanofiber Media

Journal of Engineered Fibers and Fabrics. https://publons.com/wos-op/publon/65200208/

Investigation of plasma-generated jets for supersonic flow control

46th AIAA Aerospace Sciences Meeting and Exhibit.

Effect of Trench Width and Depth on Film Cooling From Cylindrical Holes Embedded in Trenches

Journal of Turbomachinery, 131(1).

Trench film cooling - Effect of trench downstream edge and hole spacing

Proceedings of the ASME Turbo Expo, 4(PART A), 563–569.

Fabrication, assembly, and testing of Cu- and Al-based microchannel heat exchangers

Journal of Microelectromechanical Systems, 17(4), 869–881.

A Novel Antivortex Turbine Film-Cooling Hole Concept

Journal of Turbomachinery, 130(3).

Cohesive Analysis and Applications for CADesigner

CADesigner, 117–125.

Sensor networks for in-situ failure identification in woven composites throughout impact

ASME International Mechanical Engineering Congress and Exposition, Proceedings, 10 PART A, 203–210.

Modeling the effect of varying electrical voltage on the plastic deformation of a single asperity in hot-switched RF MEMS contacts

Materials Research Society Symposium Proceedings, 1137, 185–190.

Damage monitoring in woven composites using fiber-Bragg grating sensors on multiple time scales

Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2008, 2, 185–191.

Atomic scale simulations of orientation of loading axis on the growth of voids at the onset of ductile failure in single crystal Cu

Materials Research Society Symposium Proceedings, 1137, 162–167.

RF MEMS behavior, surface roughness and asperity contact

Materials Research Society Symposium Proceedings, 1052, 135–140. http://www.scopus.com/inward/record.url?eid=2-s2.0-45849129829&partnerID=MN8TOARS

Modeling of large strain deformation and failure modes in crystalline aggregates

TMS Annual Meeting, 129–134. http://www.scopus.com/inward/record.url?eid=2-s2.0-51649122510&partnerID=MN8TOARS

Microstructural modeling of failure in polycrystalline materials

Advances in Heterogeneous Material Mechanics 2008 - Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, ICHMM 2008, 3–8. http://www.scopus.com/inward/record.url?eid=2-s2.0-56649102273&partnerID=MN8TOARS

In-situ impact induced damage assessment of woven composite laminates through a FBG sensor network

Proceedings of the 4th European Workshop on Structural Health Monitoring, 825–832. http://www.scopus.com/inward/record.url?eid=2-s2.0-62949086365&partnerID=MN8TOARS

High strain-rate behavior of high strength aluminum alloys

Materials Research Society Symposium Proceedings, 1137, 143–148. http://www.scopus.com/inward/record.url?eid=2-s2.0-70450123718&partnerID=MN8TOARS

A New Approach for Modeling Permeability of Fibrous Materials

International Nonwoven Technical Conference (INTC 2008). Presented at the International Nonwoven Technical Conference (INTC 2008), Houston, Texas.

Simulating Pressure Drop of Bicomponent Air Filters

International Nonwoven Technical Conference (INTC 2008). Presented at the International Nonwoven Technical Conference (INTC 2008), Houston, Texas.

An Image-based Approach for Modeling Permeability of Fibrous Filters

American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Valley Forge, Pennsylvania.

A CFD-based Two-Scale modeling approach to predict permeability of fibrous structures

American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Valley Forge, Pennsylvania.